Engineering PapersSearch

Engineering topics

Feiereisen, William J.

Publications and source records attributed to Feiereisen, William J..

The State of NASA's Information Power Grid

This viewgraph presentation transfers the concept of the power grid to information sharing in the NASA community. An information grid of this sort would be characterized as comprising tools, middleware, and services for the facilitation of interoperability, distribution of new technologies, human collaboration, and data management. While a grid would increase the ability of information sharing, it would not necessitate it. The onus of utilizing the grid would rest with the users.

Johnston, William E.

NASA's Information Power Grid: Large Scale Distributed Computing and Data Management

Large-scale science and engineering are done through the interaction of people, heterogeneous computing resources, information systems, and instruments, all of which are geographically and organizationally dispersed. The overall motivation for Grids is to facilitate the routine interactions of these resources in order to support large-scale science and engineering. Multi-disciplinary simulations provide a good example of a class of applications that are very likely to require aggregation of widely distributed computing, data, and intellectual resources. Such simulations - e.g. whole system aircraft simulation and whole system living cell simulation - require integrating applications and data that are developed by different teams of researchers frequently in different locations. The research team's are the only ones that have the expertise to maintain and improve the simulation code and/or the body of experimental data that drives the simulations. This results in an inherently distributed computing and data management environment.

Johnston, William E.

NASA's Participation in the National Computational Grid

Over the last several years it has become evident that the character of NASA's supercomputing needs has changed. One of the major missions of the agency is to support the design and manufacture of aero- and space-vehicles with technologies that will significantly reduce their cost. It is becoming clear that improvements in the process of aerospace design and manufacturing will require a high performance information infrastructure that allows geographically dispersed teams to draw upon resources that are broader than traditional supercomputing. A computational grid draws together our information resources into one system. We can foresee the time when a Grid will allow engineers and scientists to use the tools of supercomputers, databases and on line experimental devices in a virtual environment to collaborate with distant colleagues. The concept of a computational grid has been spoken of for many years, but several events in recent times are conspiring to allow us to actually build one. In late 1997 the National Science Foundation initiated the Partnerships for Advanced Computational Infrastructure (PACI) which is built around the idea of distributed high performance computing. The Alliance lead, by the National Computational Science Alliance (NCSA), and the National Partnership for Advanced Computational Infrastructure (NPACI), lead by the San Diego Supercomputing Center, have been instrumental in drawing together the "Grid Community" to identify the technology bottlenecks and propose a research agenda to address them. During the same period NASA has begun to reformulate parts of two major high performance computing research programs to concentrate on distributed high performance computing and has banded together with the PACI centers to address the research agenda in common.

Feiereisen, William J.

Boost-phase discrimination research

The final report describes the combined work of the Computational Chemistry and Aerothermodynamics branches within the Thermosciences Division at NASA Ames Research Center directed at understanding the signatures of shock-heated air. Considerable progress was made in determining accurate transition probabilities for the important band systems of NO that account for much of the emission in the ultraviolet region. Research carried out under this project showed that in order to reproduce the observed radiation from the bow shock region of missiles in their boost phase it is necessary to include the Burnett terms in the constituent equation, account for the non-Boltzmann energy distribution, correctly model the NO formation and rotational excitation process, and use accurate transition probabilities for the NO band systems. This work resulted in significant improvements in the computer code NEQAIR that models both the radiation and fluid dynamics in the shock region.

Langhoff, Stephen R.

Particle simulation of rarefied aeropass maneuvers of the Magellan spacecraft

Rarefied and free molecular flowfields corresponding to proposed aeropass maneuvers through the atmosphere of Venus by the Magellan spacecraft are computed with a vectorized particle simulation method. The significance of rarefaction and reaction effects are assessed and surface heat flux, drag coefficients, and flowfield properties are computed. A simple surface heat transfer model is coupled directly to the simulation and assumes that each surface element is in radiative equilibrium with deep space. This allows direct computation of surface temperature distributions rather than requiring prescribed isothermal boundary conditions. Uncoupled dual-node heat transfer models, which account for heat capacity and thermal conductivity within each structural component, permit more accurate determination of surface temperatures. Such temperatures restrict the allowable altitudes and entry speeds of the aeropass maneuvers, and must therefore be estimated accurately. Simulations with an entry velocity of 8600 m/s at altitudes between 125 and 140 km reveal that allowable surface temperatures occur only at the highest altitudes where the flowfield is appropriately modeled as free-molecular. Excessive surface heat flux occurs at lower altitudes where molecular collisions are significant.

Haas, Brian L.

Computational analysis of plume induced separation

Full Navier-Stokes simulations around axisymmetric boattailed and flared rockets are numerically investigated for plume induced separation phenomenon. At lower altitudes, the plume interaction with the external flow does not cause any flow separation on the body, but at conditions corresponding to higher altitudes large plume induced separation is observed. Addition of a flare to the afterbody limits the extent of separation at high altitudes. Computational solutions for the boattailed axisymmetric geometry are compared with available wind-tunnel and flight data. The effect of forebody ablation is studied by modifying the inflow boundary layer profile. Numerical solutions with thicker boundary layers show significantly greater plume-induced separation compared with nonablating cases. Heat transfer to the wall was computed for the flared afterbody geometry and is presented.

Venkatapathy, Ethiraj

An assessment of 'shuffle algorithm' collision mechanics for particle simulations

Among the algorithms for collision mechanics used at present, the 'shuffle algorithm' of Baganoff (McDonald and Baganoff, 1988; Baganoff and McDonald, 1990) not only allows efficient vectorization, but also discretizes the possible outcomes of a collision. To assess the applicability of the shuffle algorithm, a simulation was performed of flows in monoatomic gases and the calculated characteristics of shock waves was compared with those obtained using a commonly employed isotropic scattering law. It is shown that, in general, the shuffle algorithm adequately represents the collision mechanics in cases when the goal of calculations are mean profiles of density and temperature.

Feiereisen, William J.

The hypersonic double ellipse in rarefied flow

The problem of the hypersonic double ellipse in rarefied flow is treated by a particle method using the collision model first described by McDonald (1988). In the approach used here, the computational overhead is reduced by using simple cubic cells. The problem of the definition of complex geometries is addressed by developing an algorithm to define the relation of a body surface to the network of cells.

Feiereisen, William J.

Three dimensional Discrete Particle Simulation about the AFE geometry

The Discrete Particle Simulation method, due to Baganoff, has recently been extended to allow representation of gases composed of multiple species, to general power-law molecular interactions and to permit flows in thermal non-equilibrium. Particular attention has been paid to the implementation of this physics while retaining the efficiency of the original algorithm. Here, the enhanced algorithm is applied to the simulation of the flow field about the Aeroassisted Flight Experiment (AFE) vehicle with the same flight parameters as in a previous paper. The enhancements to the algorithm are introduced and comparisons are made to the previous calculation.

Feiereisen, William J.

Progress in computing nozzle/plume flow fields

The long-term goal is to develop the capability to predict chemically-reacting, multi-stream nozzle and plume flow fields. Two basic Navier-Stokes solvers, including the widely used F-3D code, are upgraded to include several upwind difference schemes and portable chemistry packages. Current computational capabilities for solving equilibrium single-stream and multi-stream, frozen gas, and finite rate chemistry problems are described. A variety of complex nozzle and plume flows were computed. Solutions presented include axisymmetric plume flow for ideal and equilibrium air, 3-D NASP nozzle/afterbody flow, and an internal nozzle calculation comparing various finite-rate chemistry packages.

Ruffin, Stephen M.

Three dimensional discrete particle simulation of an AOTV

A discrete Particle Simulation method, recently formulated by Baganoff, is discussed in the context of its application to the simulation of the flow field about the Aeroassisted Flight Experiment (AFE). As a basis for discussion the current algorithm is first described. Because of the use of a cubic Cartesian mesh, the representation of the geometry is different than that of other particle methods and an algorithm for its generation is discussed. The method is applied to test problems and then to the AFE calculation with the use of 9.52 million particles and 432,000 cells.

Feiereisen, William J.

Computational studies of hard-body and 3-D effects in plume flows

Axisymmetric and three-dimensional, multi-nozzle plume flows around generic rocket geometries are investigated with a three-dimensional Navier-Stokes solver to study the interactive effects between hard body and the plume. Time-asymptotic, laminar, ideal-gas solutions obtained with a two-factor, flux-split scheme and a diagonal, upwind scheme are presented. Computed solutions to three-dimensional, multi-nozzle problems and single-nozzle, axisymmetric problems demonstrate flow field features including three-dimensionality and hard-body effects. Geometry and three-dimensional effects are shown to be significant in multi-nozzle flows.

Venkatapathy, Ethiraj

3-D plume flow computations with an upwind solver

In the present study multi-nozzle plume flows are computed with a three-dimensional, Navier-Stokes solver. Numerical simulations are performed with the flux-split, two-factor, time symptotic, viscous flow solver. The two factor splitting provides a stable three-dimensional solution procedure under ideal-gas assumptions. Viscous, ideal-gas solutions for a thin lip symmetrical nozzle are compared with experimental and numerical solutions. Computed solutions to axisymmetric and three-dimensional, multi-nozzle problems at various altitudes and flight conditions demonstrate flow field complexity and three-dimensional effects.

Venkatapathy, Ethiraj

Computations of ideal and real gas high altitude plume flows

In the present work, complete flow fields around generic space vehicles in supersonic and hypersonic flight regimes are studied numerically. Numerical simulation is performed with a flux-split, time asymptotic viscous flow solver that incorporates a generalized equilibrium chemistry model. Solutions to generic problems at various altitude and flight conditions show the complexity of the flow, the equilibrium chemical dissociation and its effect on the overall flow field. Viscous ideal gas solutions are compared against equilibrium gas solutions to illustrate the effect of equilibrium chemistry. Improved solution accuracy is achieved through adaptive grid refinement.

Feiereisen, William J.