Engineering Papers⌕ Search

Engineering topics

Fedorov, Andrei G.

Publications and source records attributed to Fedorov, Andrei G..

At least 19 records

Systems and methods of electron beam induced processing

Embodiments of the present disclosure provide for methods and systems for making structures using an electrospray system while under vacuum. In particular, embodiments of the present disclosure provide for methods and systems for ultra-fast growth of high aspect ratio nano/meso/micro-structures with three dimensional topological complexity and control of phase and composition of the structure formed.

Fedorov, Andrei G.↗

Thermodynamic Analysis of Nano-Electrospray Induced Gas Jets

Nano-electrospray (nES) produces a plume of charged liquid droplets which have drag interactions with the surrounding gas after they are emitted from a source capillary. The resulting induced gas flow has often been considered unimportant, but we have demonstrated that a gas microjet of significant velocity up to 10s of m/s can be produced. In this work we present a thermodynamic framework that enables analysis of gas jet generation from electrosprays and introduce the important metrics for such analysis, effectiveness (a measure of momentum transfer from the electrosprayed aerosol to gas) and efficiency (a measure of energy conversion from electrical energy generating the electrospray to gas kinetic energy). This analytical framework is applicable to any two-phase flows consisting of discrete conservative-force-driven particles which exchange momentum with an inert, otherwise quiescent fluid medium to yield a co-flowing two-phase jet. Here, we apply this framework to sprays of water from nano-electrospray emitters to demonstrate that increasing the applied electrical potential difference, increasing liquid mass flowrate, and decreasing droplet size all can increase electrospray induced gas jet strength, but only the latter two do so while also increasing the momentum transfer effectiveness and energy conversion efficiency.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Droplet-Gas Interactions in Nanoelectrospray Multiphase Flow

Electrospray (ES) is production of a charged droplet plume that transits from an electrically biased supply capillary to a counter electrode under the influence of an electric field. Drag interactions with the surrounding gas decelerate the droplets while transferring the momentum from droplets to accelerate the surrounding gas, resulting in an induced gas flow. This work seeks to characterize the structure of the resulting gas jet and identify the key mechanisms defining the flow structure. The phenomenon of gas jets produced by momentum transfer from nano-electrospray (nES) plumes is explored with schlieren visualization, thermal anemometry, and numerical simulations. Schlieren visualization experiments provide information on the flow structure in support of simulation predictions, and the hot thermistor anemometry measurements of gas velocities outside the spray demonstrate quantitatively validated simulation results. The study reveals the formation of a moderately high velocity coaxial gas jet within the nES plume and provides insight into the overall flow structure of the induced flow. The multiphase electrohydrodynamic simulations enable numerical experimentation to explore the fundamental physics of coupled droplet-gas transport and the resulting flow structure. The simulations, confirmed by the experiments, reveal gas jetting induced by nES with a narrow (sub hundred micrometers in diameter) core originating from the nES liquid-jet breakup region and a surrounding larger-in-extent zone (several hundred micrometers in diameter) of lower velocity gas flow within the electrospray plume. This behavior is due to nES ejecting a stream of droplets from the tip of a narrow liquid cone-jet, where the combined effect of many small droplets transferring momentum to a confined region of gas yields a narrow but high-velocity gas stream. Furthermore, the micro-jets produced by nES have practical utility for mass spectrometry, 3D printing and fabrication, and thermal management.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Systems and methods of electron beam induced processing

Embodiments of the present disclosure provide for methods and systems for making structures using an electrospray system while under vacuum. In particular, embodiments of the present disclosure provide for methods and systems for ultra-fast growth of high aspect ratio nano/meso/micro-structures with three dimensional topological complexity and control of phase and composition of the structure formed.

Fedorov, Andrei G.↗

Altering apparent optical properties with an array of semitransparent mesoscale structures

The ability to control and optimize interactions between light and matter has much utility in engineering design. A well-researched way to achieve optical property modulation is via the use of optical metamaterials, which feature sub-wavelength scale surface structures. In this work, an alternative approach for modulating optical properties is presented using a composite surface modified with a periodic array of semitransparent hemispherical shell mesoscale structures which are larger than the incident light wavelength. A ray-tracing simulation approach is used to predict the optical behavior for an arrayed surface. At oblique angles of incidence, significant increases and decreases in apparent absorptance are achieved via the use of optically thick and thin shells, respectively. Additionally, a potential application to solar cells is described with optimal spectral behavior achieved via the use of semitransparent external structures.

Kucuktas, Onur A.↗

Modulation of apparent optical properties using arrayed mesoscale structures

In this study, a method for using arrays of mesoscale structures to modify the apparent optical properties of an opaque composite surface has been theoretically demonstrated to both raise and lower the apparent emissivity as compared to the intrinsic properties of the constitutive materials. For design problems where thermomechanical and optical material properties are both of importance, mesoscale surface structuring can greatly expand the design space. Analysis via the net radiosity method herein illustrates the ability to achieve a wide range of spectral apparent optical properties. Notably, a hexagonal array of spheres on a planar surface can raise the apparent emissivity of a planar surface by 50%. Conversely, a hexagonal enclosure of reradiating surfaces, realized by thin adiabatic walls, can reduce the apparent emissivity of a blackbody by half. As this method of modifying apparent optical properties utilizes structures much larger than the wavelengths of interest, the relationship between intrinsic planar emissivity, geometry, and apparent emissivity can be computed semi-analytically at low computational expense. Passive solar cooling, thermophotovoltaic cells, aerodynamic surfaces exposed to intense heating, and solar absorbers are presented as case studies that could benefit from the use of mesoscale structures on opaque surfaces to modify the apparent optical properties.

42 ENGINEERING↗

Radiolytic redox interplay defines nanomaterial synthesis in liquids

Irradiation of a liquid solution generates solvated electrons and radiolysis products, which can lead to material deposition or etching. The chemical environment dictates the dominant reactions. Radiolysis-induced reactions in salt solutions have substantially different results in pure water versus water-ammonia, which extends the lifetime of solvated electrons. We investigate the interplay between transport and solution chemistry via the example of solid silver formation from e-beam irradiation of silver nitrate solutions in water and water-ammonia. The addition of ammonia results in the formation of a secondary ring-shaped deposit tens of microns in diameter (formed over tens of seconds) around the primary point of deposition (formed over milliseconds). Simulations uncover the relative importance of oxidizing and reducing reactions and transport effects. Our explanation of this behavior involves mechanisms beyond ammonia’s role in extending solvated electron lifetimes.

36 MATERIALS SCIENCE↗

FEBIP for functional nanolithography of 2D nanomaterials

Lithographic patterning on emerging nanomaterials is one of essential ingredients for the development of new functional nanomaterial and device systems. Focused electron beam induced processing (FEBIP) in combination with an on-demand reconfigurable precursor injection system enables the highest resolution and controllability of nanolithography on two-dimensional (2D) nanomaterials. FEBIP allows for localized atomic-to-nanoscale engineering of nanomaterials and devices in a multi-mode format including geometrical patterning, functionalization/defect formation/doping, metal/metal oxide deposition, interface fusion and activation, active channel cleaning. This chapter discusses the scientific bases and showcases the state-of-the-art FEBIP technologies with a specific focus on functional lithography of 2D nanomaterials and provides future prospects of FEBIP technologies to address real industrial needs for the development of high-performance, next-generation functional devices.

2D materials, nanolithography, focused electron be↗

Adaptive simulations enable computational design of electron beam processing of nanomaterials with supersonic micro-jet precursor

Focused Electron Beam Induced Processing (FEBIP) is a powerful tool for the “direct-write” of nanomaterials with the possibility of atomistic control on suspended 2D material substrates. FEBIP capabilities have been significantly expanded by using a localized jet-based delivery of precursors, and especially when a thermally energized supersonic micro-jet enhances the delivery of mass flux along with controlling the far-from-equilibrium thermodynamic state of adsorbed adatoms. The possibilities of growing nanomaterials with “dialed-in” composition with ultra-high growth rates and aspect ratios up to 100:1 have been demonstrated using the supersonic micro-jet-FEBIP. Bringing this scientific discovery to the level of maturity required for practical applications in additive nanomanufacturing requires simulation tools that are capable of capturing the complex flow physics of micro-jet-substrate interactions that bridge a wide range of flow regimes from the high-density gas micro-jet expanding into the vacuum environment of FEBIP. To address this significant computational challenge, a new approach has been developed and described in this work for a multiscale adaptive DSMC (Direct Simulation Monte Carlo) algorithm to predict the micro-jet gas dynamics in an FEBIP environment, spanning the full range of flow regimes from low Knudsen (Kn) number O(0.01) continuum flow to high Kn of O(10) for the molecular flow within a unified computational framework. Here, the fundamental principles of the adaptive DSMC algorithm are described, its viability as a DSMC technique is demonstrated, and computational improvements for the benchmark cases are discussed in the context of advancing 3D nanofabrication with FEBIP. Ultimately, combining the first principle simulations via adaptive DSMC with the complementary experimental data will enable the creation of the powerful CAD tools for in silico design and optimal operation of micro-jet-FEBIP.

36 MATERIALS SCIENCE↗

High-Resolution Three-Dimensional Sculpting of Two-Dimensional Graphene Oxide by E-Beam Direct Write

On demand switchable additive/subtractive patterning of 2D nanomaterials is an essential capability for developing new concepts of functional nanomaterials and their device realizations. Traditionally, this is performed via a multi-step process using photoresist coating and patterning by conventional photo or electron beam lithography, which is followed by bulk dry/wet etch or deposition. This limits the range of functionalities and structural topologies that can be achieved, as well as increases the complexity, cost, and possibility of contamination which are significant barriers to device fabrication from highly sensitive 2D materials. Focused electron beam induced processing (FEBIP) enables a material chemistry/site-specific, high-resolution multi-mode atomic scale processing and provides unprecedented opportunities for direct-write, single-step surface patterning of 2D nanomaterials with an in-situ imaging capability. It allows for realizing a rapid multi-scale/multi-mode approach, ranging from an atomic scale manipulation (e.g., via targeted defect introduction as an active site) to a large-area surface modification on nano and micro scales, including patterned doping and material removal/deposition with 2D (in-plane)/3D (out-of-plane) control. In this work, we report on a new capability of FEBIP for nanoscale patterning of graphene oxide via removal of oxygenated carbon moieties with no use of reactive gas required for etching complemented by carbon atom deposition using focused electron beam. The mechanism of experimentally observed phenomena is explored using the density functional theory (DFT) calculations, revealing that interactions of e-beam liberated reactive oxygen radicals with carbon atoms on graphene basal plane lead to creation of atomic vacancies in the material. The reaction by-products are volatile carbon di-oxides, which are dissociated and volatilized from the graphene oxide surface functional groups by interactions with an energetic focused electron beam. Along with selective “subtractive” patterning of graphene oxide, the same electron beam with increased irradiation doses can deposit out-of-plane 3D carbon nanostructures on top of or around the 2D etched pattern, thus forming a hybrid 2D/3D nanocomposite with feature control down to a few nanometers. Furthermore, this in-operando dual nanofabrication capability of FEBIP is unmatched by any other nanopatterning techniques and opens a new design window for forming 2D/3D complex nanostructures and functional nanodevices.

36 MATERIALS SCIENCE↗

A Cost-Performance Analysis of a Sodium Heat Engine for Distributed Concentrating Solar Power

We present that a sodium thermal electrochemical converter (Na-TEC) generates electricity directly from heat through isothermal expansion of sodium ions across a beta"-alumina solid-electrolyte. This heat engine has been considered for use with conventional concentrating solar power (CSP) systems before. However, unlike previous single-stage devices, the improved design uses two stages with an interstage reheat, allowing more economical and efficient conversion up to 29% at a hot side temperature of 850 °C. Herein, a cost-performance analysis for this improved design assesses opportunities for distributed-CSP in the context of micro-combined heat and power systems. A high-level techno-economic analysis (TEA) is presented that explores four scenarios where a Na-TEC is used as the heat engine for a distributed-CSP system. Overnight capital cost and levelized cost of electricity (LCOE) are estimated for a system lifetime of 30 years, revealing that overnight capital costs in a range from $3.57 to $17.71 per W e are feasible, which equate to LCOEs from 6.9 to 17.2 cents kWh e -1 . This analysis makes a significant contribution by concurrently quantifying the efficiency and unit costs for a range of multistage configurations, and demonstrating that a Na-TEC may be a promising alternative to Stirling engines for distributed-CSP systems at residential scale of 1–5 kW e .

14 SOLAR ENERGY↗

Multimode jetting unlocks a trade-off between nanostructure morphology and composition in focused electron beam induced deposition

An ability to accelerate the growth rate while simultaneously controlling shape and composition of deposits is fundamental to expanding the utility of electron beam assisted deposition for “direct write” nanostructure fabrication from gas phase precursors. Here, we report on novel tunable mode of Focused Electron Beam Induced Deposition (FEBID) as enabled by the switchable use of reactive (O2) and inert (Ar) “assist” gases directed at high impingement energy and momentum to a deposition site concurrently with a supply of a precursor in a dual-nozzle FEBID arrangement. Organometallic molecules introduced into a deposition chamber in a free-molecular flow regime through a conventional gas injection nozzle, yielding a broad uniform substrate coverage by the precursor in a quasi-equilibrium adsorbed state. Simultaneously, a supersonic micro-jet from a micron-scale capillary placed in close proximity to a deposition site produces a low Knudsen number continuous flow impingement of energized “assist” gas, which perturbs the precursor state to facilitate different chemical reaction pathways. This process offers modulation of deposition outcomes, e.g., enhanced vertical growth rate (aspect ratio) of nanostructures when using argon micro-jet while locally removing parasitic carbonaceous by-products of organometallic precursor decomposition reaction by e-beam through interactions with oxygen micro-jet. Such in-situ/in operando (during growth and on-demand switchable) modulation of FEBID allows for rapid and precisely controllable deposition for a desired outcome, such as tuning metal-to-carbon composition and maintaining shape fidelity in fabricating high-aspect ratio composite nanostructures, which extends the capabilities of FEBID as a robust multi-dimensional, multi-purpose nanoscale 3D printing tool.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Dual-Stage Sodium Thermal Electrochemical Converter (Na-TEC)

The sodium thermal electrochemical converter (Na-TEC) is a heat engine that generates electricity via the isothermal expansion of sodium ions through a solid-electrolyte. The Na-TEC can ideally achieve conversion efficiencies above 45%, but thermal management limitations have constrained previous single-stage devices to thermal efficiencies below 20%. To mitigate some of these limitations, the isothermal expansion can be divided into two stages; one at the evaporator temperature (1150K) and another at an intermediate temperature (550K – 1050K). This dual-stage Na-TEC takes advantage of regeneration and reheating, and is amenable to improved thermal management through reduced parasitic losses. The dual-stage device can improve the efficiency by ~8% points over the best performing single-stage device. Generally, a single-stage Na-TEC should be used for applications requiring high power densities, whereas a dual-stage Na-TEC should be used for applications requiring high efficiency.

14 SOLAR ENERGY↗

Non-equilibrium adatom thermal state enables rapid additive nanomanufacturing

A new state of radical thermal non-equilibrium in surface adsorbed molecules is discovered that enables rapid surface diffusion of energized adatoms with a negligible effect on the substrate surface temperature. Due to enhanced surface diffusion, growth rates can be achieved that improve the feasibility of many nanofabrication techniques. Since the adatom temperature cannot be directly measured without disturbing its thermodynamic state, the first principle hard-cube model is used to predict both the adatom effective temperature and the surface temperature in response to gaseous particle impingement in a vacuum. The validity of the approach is supported by local, spatially-resolved surface temperature measurements of the thermal response to supersonic microjet gas impingement. The ability to determine and control the adatom effective temperature, and therefore the surface diffusion rate, opens new degrees of freedom in controlling a wide range of nanofabrication processes that critically depend on surface diffusion of precursor molecules. Furthermore, this fundamental understanding has the potential to accelerate research into nanoscale fabrication and to yield the new materials with unique properties that are only accessible with nanoscale features.

74 ATOMIC AND MOLECULAR PHYSICS↗

Sodium Pumping via Condensation within a Non-Wetting Porous Structure

The transfer of liquid sodium from a low-pressure condenser to a high-pressure evaporator is required to complete the thermodynamic cycle of a sodium thermal electrochemical converter (Na-TEC). A unique capillary pump is explored in this work, whereby low-pressure sodium vapor is condensed within a non-wetting (i.e. contact angle > pi/2) stainless steel porous structure. Due to the curvature of the non-wetting liquid-vapor interface, the liquid adjacent to the interface is at a higher pressure than the vapor. This is in contrast to traditional wicks, where the liquid adjacent to the interface has a lower pressure. Conjugate heat transfer techniques are used to model the coupled momentum and thermal transport processes within this non-wetting porous structure. Due to the low mass flowrates in the Na-TEC (< 0.1 mg/s), higher order friction terms are neglected and the classical Darcy’s law is used for the non-isothermal, compressible vapor flow. At lower temperatures, the sodium vapor density becomes sufficiently small and there is a transition from classic Poiseuille flow (Kn < 0.1) to Knudsen flow (Kn > 10). Furthermore, transport due to binary diffusion is also considered for situations where there is a substantial presence of non-condensable argon in the sodium vapor plenum. Initial modeling results showing expected mass flowrates, temperature profiles, and liquid-vapor interface locations are presented for various physical conditions. The main design features of an experimental set-up used to demonstrate this capillary pumping is also described in detail, including the method used to measure the low sodium mass flowrates. Initial experimental results demonstrating sodium pumping for a range of temperatures (800K – 1100K) will be presented and compared against the model predictions. Finally, several of the challenges with this experiment will be discussed, and specific strategies used to address these are presented.

14 SOLAR ENERGY↗

Sodium Pumping via Condensation within a Non-Wetting Porous Structure

In a sodium thermal electrochemical converter (Na-TEC), the transfer of liquid sodium from a low-pressure condenser to a high-pressure evaporator is necessary to complete the thermodynamic cycle. This pumping can be typically achieved via capillary action. A unique capillary pump is explored in this work, whereby low-pressure sodium vapor is condensed within a non-wetting (i.e. contact angle > π/2) stainless steel porous structure. Due to the curvature of the non-wetting liquid-vapor interface, the liquid adjacent to the interface is at a higher pressure than the vapor. This is in contrast to traditional wicks, where the liquid adjacent to the interface has a lower pressure. Conjugate heat transfer techniques are required to model the coupled momentum and thermal transport processes within this porous structure. Due to the low mass flowrates in the Na-TEC (< 0.1 mg/s), higher order friction terms are neglected and the classical Darcy’s law is applied for the non-isothermal, compressible vapor flow. At lower temperatures, the sodium vapor density becomes sufficiently small and there is a transition from classic Poiseuille flow (Kn < 0.1) to Knudsen flow (Kn > 10). The permeability of the porous structure is modeled using the Blaze-Kozeny expression, with an additional factor that accounts for this change in Kn. Initial modeling results showing expected mass flowrates, temperature profiles, and liquid-vapor interface locations are presented. The design of an experiment to validate the results from this modeling effort is also described. The main design features of the experimental set-up are presented, and the method used to measure the low sodium mass flowrates is discussed. Initial experimental results demonstrating sodium pumping for a range of temperatures (850K – 1150K) will be presented and compared against the model predictions. A number of challenges affecting the successful completion of this experiment will also be discussed. Primarily, the sodium vapor must be superheated to prevent condensation anywhere except within the porous structure. Other challenges include the requirement to keep the condensation interface above ~ 675K to prevent transition to a wetting regime, and the control of the transient heating rate so that vapor flows slower than the quasi steady-state mass flowrate, which would otherwise lead to a flooding condition that prevents pumping. Specific strategies used to address these challenges are presented, and the experimental procedures used to gather data are discussed.

14 SOLAR ENERGY↗