Engineering Papers⌕ Search

Engineering topics

Fathy, Aly E.

Publications and source records attributed to Fathy, Aly E..

Eddy current flow meter model validation with a moving solid rod*

We report that the eddy current flow meter (ECFM) has been used to measure velocities and temperatures of conductive flows, such as liquid metal flows in a nuclear fission reactor. The goal of this paper is to develop a finite element electromagnetic model that can characterize the ECFM sensor performance and validate this finite element model with detailed velocity measurements of a controlled, well-characterized moving conductive solid rod. Both measurements and modeling were performed for various parameters that are important for ECFM performance such as rod velocity, rod material, ECFM sensor coil length, number of sensor coils, applied alternating current (AC) current amplitude, and applied ECFM AC frequency. For all parametric scans, the measurement and modeling agree well in both magnitude and trend. The normalized root-mean-square error between measurement and modeling is less than 10% for all cases. These results suggest that electromagnetic modeling could eventually be used to cost-effectively design future ECFM sensors in arbitrary geometry for more challenging applications such as liquid metal nuclear fission reactors.

47 OTHER INSTRUMENTATION↗

Design Guidelines of a Double-Gap Microwave Rebuncher Cavity for a 400 MHz, 2.5 MeV Energy Light Ion Accelerator with Lower Gap Voltage and Field

Here, a detailed electromagnetic model of a double-gap microwave rebuncher cavity proposed for 400-MHz, 2.5 MeV energy of the front end section in 1 GeV energy H- ion linear accelerator, is presented and validated by extensive simulations. This design is intended to decrease both the utilized gap voltage and peak electric field of the rebunching cavity, henceforth may decrease X-ray radiation. A low cost 1/2 scaled aluminum cavity double gap model was built and tested for model validation. Mode frequencies and quality factors of the model were measured and compared to simulation. Additionally, bead perturbation method was used to measure the para-axial electric field. Simulation of the single and double gap cavities were compared to measurements and were in very good agreement. Subsequently, design guidelines have been developed to design the double gap rebuncher, optimize its gap size for lower electric fields and reduced X-ray radiation.

43 PARTICLE ACCELERATORS↗

Feasibility of Folded and Double Dipole Radio Frequency Quadrupole (RFQ) Cavities for Particle Accelerators

The quadrupole and dipole modes frequencies can be very close in a long four-vane RFQ as structure length increases. This requires extra mode stabilizer design to improve field stability, which may add to system complexity and cost. Therefore, we investigate other four-vane RFQ designs which can have potential advantages and different mode spectrum. These designs are realized by modifying the RFQ cut-back scheme to be a folded-dipole (FD) or a double-dipole (DD) RFQs. In this paper, mode spectrums of these structures are further investigated as function of structure length and dipole mode properties are discussed in detail. Comparison of other properties of the three cut-back methods-FD, DD, and the conventional four cut-backs (4C) - are presented as well. Finally, full 3-D simulations have been carried out for mode analysis of these RFQs with some experimental validation.

43 PARTICLE ACCELERATORS↗

Slow wave structures using twisted waveguides for charged particle applications

A rapidly twisted electromagnetic accelerating structure includes a waveguide body having a central axis, one or more helical channels defined by the body and disposed around a substantially linear central axial channel, with central portions of the helical channels merging with the linear central axial channel. The structure propagates electromagnetic waves in the helical channels which support particle beam acceleration in the central axial channel at a phase velocity equal to or slower than the speed of light in free space. Since there is no variation in the shape of the transversal cross-section along the axis of the structure, inexpensive mechanical fabrication processes can be used to form the structure, such as extrusion, casting or injection molding. Also, because the field and frequency of the resonant mode depend on the whole structure rather than on dimensional tolerances of individual cells, no tuning of individual cells is needed. Accordingly, the overall operating frequency may be varied with a tuning/phase shifting device located outside the resonant waveguide structure.

43 PARTICLE ACCELERATORS↗