Engineering topics
Publications and source records attributed to Farmer, G. I..
Technique, suitable for monolithic device fabrication methods, permits growth of LED structures on GaP substrates by liquid-phase epitaxial method, thus obviating needs for growing thick layers and for removing substrates. High efficiency infrared LED's can be developed as pumping sources for Nd:YAG lasers.
The dynamic behavior of Nd:YAG lasers is theoretically analyzed. In experiments, an array of twenty GaAlAs diodes was used as the pumping light source for a Nd:YAG laser. An index-matching glass half-cylinder was used instead of the conventional hollow metal reflector. The refractive index of the half-cylinder was 1.8, which matched the refractive index of the Nd:YAG rod. A maximum CW output power of 27 mW at a current density of 207 A/sq cm was achieved using this glass half-cylinder, while 6.7 mW were obtained when a hollow metal reflector was used.
The results of a development program for light emitting diode (LED) pumped Nd:YAG lasers are described. An index matching method to increase the coupling efficiency of the laser is described. A solid glass half-cylinder of 5.0 by 5.6 centimeters was used for index matching and also as a pumping cavity reflector. The laser rods were 1.5 by 56 millimeters with dielectric coatings on both end surfaces. The interfaces between the diode array, glass cylinder, and laser rod were filled with viscous fluid of refractive index n = 1.55. Experiments performed with both the glass cylinder and a gold coated stainless steel reflector of the same dimensions under the same operating conditions indicate that the index matching cylinder gave 159 to 200 percent improvement of coupling efficiency over the metal reflector at various operating temperatures.
Explore the source record for details and available documents.