Engineering Papers⌕ Search

Engineering topics

Farassat, F.

Publications and source records attributed to Farassat, F..

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Advanced turboprop noise prediction based on recent theoretical results

The development of a high speed propeller noise prediction code at Langley Research Center is described. The code utilizes two recent acoustic formulations in the time domain for subsonic and supersonic sources. The structure and capabilities of the code are discussed. Grid size study for accuracy and speed of execution on a computer is also presented. The code is tested against an earlier Langley code. Considerable increase in accuracy and speed of execution are observed. Some examples of noise prediction of a high speed propeller for which acoustic test data are available are given. A brisk derivation of formulations used is given in an appendix.

Farassat, F.↗
NASA NTRS1987

Structure and propagation of supersonic singularities from helicoidal sources

An asymptotic analysis of the acoustic field radiated by a supersonic helicoidal line source distribution is given. The asymptotic results are valid in the vicinity of the Mach surfaces associated with the moving sources. Particular attention is paid to the singular nature of the field on the Mach surfaces, which the analysis describes exactly. In addition, it is found that the asymptotic approximation predicts numerical values of the pressure with considerable accuracy. Some details on the field of a single source are derived as a special case.

Myers, M. K.↗
NASA NTRS1987

Quadrupole source in prediction of the noise of rotating blades - A new source description

The aim of this paper is to perform a theoretical study of the quadrupole term of the Ffowcs Williams-Hawkings (FW-H) equation to obtain practical results for applications to rotating blades. The quadrupole term of the FW-H equation is algebraically manipulated into volume, surface and line sources using generalized function theory and differential geometry. The volume source is of the type in Lighthill's jet noise theory. The surface sources are on the blade and shock surfaces and the line source is at the trailing edge. It is shown that contribution of volume sources in the boundary layer and wakes can be written in the form of surface integrals. It is argued that the surface and line sources and the part of the volume sources in the boundary layer, wakes and vortices near the blades should be sufficient in calculation of the noise of high speed rotating blades. The integrals correspoding to the various sources appearing in the formula for calculation of the acoustic pressure are briefly derived.

Farassat, F.↗
NASA NTRS1987

Extension of Kirchhoff's formula to radiation from moving surfaces

Kirchhoff's formula for radiation from a closed surface has been used recently for prediction of the noise of high speed rotors and propellers. Because the closed surface on which the boundary data are prescribed in these cases is in motion, an extension of Kirchhoff's formula to this condition is required. In this paper such a formula, obtained originally by Morgans for the interior problem, is derived for regions exterior to surfaces moving at speeds below the wave propagation speed by making use of some results of generalized function theory. It is shown that the usual Kirchhoff formula is a special case of the main result of the paper. The general result applies to a deformable surface. However, the special form it assumes for a rigid surface in motion is also noted. In addition, Morgans' result is further extended by showing that edge line integrals appear in the formula when applied to a surface that is piecewise smooth. Some possible areas of application of the formula to problems of current interest in aeroacoustics are discussed.

Farassat, F.↗
NASA NTRS1987

Comments on the aeroacoustics of helicopter rotors

Some techniques and procedures used in rotor aeroacoustics are examined. The advantages and disadvantages of using the acoustic analogy for noise prediction of helicopter rotors are discussed. The time domain and frequency domain approaches to rotor noise predictions are described. Consideration is given to steady and unsteady thickness noise, loading noise, and quadrupole noise.

Farassat, F.↗
NASA NTRS1987

The uses and abuses of the acoustic analogy in helicopter rotor noise prediction

The generation of noise by helicopter rotor blades is considered theoretically, reviewing recent analyses based on the acoustic analogy (where the effect of fluid motion is replaced by fictitious sources in an undisturbed fluid). The fundamental principles of the acoustic approach are explained and illustrated with diagrams; the governing Ffowcs-Williams/Hawkings equations are written with a reformulated quadrupole term; and the directivity of noise produced (1) by regions with steep gradients (such as shock surfaces) and (2) by boundary-layer quadrupoles (tip-vortex and blade wakes) is shown to be the same as that of thickness noise. The need to include both (1) and (2) in acoustic-analogy computations is indicated.

Farassat, F.↗
NASA NTRS1987

The Uses and Abuses of the Acoustic Analogy in Helicopter Rotor Noise Prediction

This paper is theoretical in nature and addresses applications of the acoustic analogy in helicopter rotor noise prediction. It is argued that in many instances the acoustic analogy has not been used with care in rotor noise studies. By this it is meant that approximate or inappropriate formulations have been used. By considering various mechanisms of noise generation, such abuses are identified and the remedy is suggested. The mechanisms discussed are thickness, loading, quadrupole, and blade-vortex interaction noise. The quadrupole term of the Ffowcs Williams-Hawkings equation is written in a new form which separates the contributions of regions of high gradients such as shock surfaces. It is shown by order of magnitude studies that such regions are capable of producing noise with the same directivity as the thickness noise. The inclusion of this part of quadrupole sources in current acoustic codes is quite practical. Some of the difficulties with the use of loading noise formulations of the first author in predictions of blade-vortex interaction noise are discussed. It appears that there is a need for development of new theoretical results based on the acoustic analogy in this area. Because of the impulsive character of the blade surface pressure, a time scale of integration different from that used in loading and thickness computations must he used in a computer code for prediction of blade-vortex interaction noise.

Farassat, F.↗
NASA NTRS1986

Advanced turboprop noise prediction: Development of a code at NASA Langley based on recent theoretical results

The development of a high speed propeller noise prediction code at Langley Research Center is described. The code utilizes two recent acoustic formulations in the time domain for subsonic and supersonic sources. The structure and capabilities of the code are discussed. Grid size study for accuracy and speed of execution on a computer is also presented. The code is tested against an earlier Langley code. Considerable increase in accuracy and speed of execution are observed. Some examples of noise prediction of a high speed propeller for which acoustic test data are available are given. A brisk derivation of formulations used is given in an appendix.

Farassat, F.↗
NASA NTRS1986

Aerodynamics via acoustics - Application of acoustic formulas for aerodynamic calculations

Prediction of aerodynamic loads on bodies in arbitrary motion is considered from an acoustic point of view, i.e., in a frame of reference fixed in the undisturbed medium. An inhomogeneous wave equation which governs the disturbance pressure is constructed and solved formally using generalized function theory. When the observer is located on the moving body surface there results a singular linear integral equation for surface pressure. Two different methods for obtaining such equations are discussed. Both steady and unsteady aerodynamic calculations are considered. Two examples are presented, the more important being an application to propeller aerodynamics. Of particular interest for numerical applications is the analytical behavior of the kernel functions in the various integral equations.

Farassat, F.↗
NASA NTRS1986

The evolution of methods for noise prediction of high speed rotors and propellers in the time domain

Linear wave equation models which have been used over the years at NASA Langley for describing noise emissions from high speed rotating blades are summarized. The noise sources are assumed to lie on a moving surface, and analysis of the situation has been based on the Ffowcs Williams-Hawkings (FW-H) equation. Although the equation accounts for two surface and one volume source, the NASA analyses have considered only the surface terms. Several variations on the FW-H model are delineated for various types of applications, noting the computational benefits of removing the frequency dependence of the calculations. Formulations are also provided for compact and noncompact sources, and features of Long's subsonic integral equation and Farassat's high speed integral equation are discussed. The selection of subsonic or high speed models is dependent on the Mach number of the blade surface where the source is located.

Farassat, F.↗
NASA NTRS1986

The Ffowcs Williams-Hawkings equation - Fifteen years of research

The Ffowcs Williams-Hawkings equation governs the generation of sound in fluids in the presence of solid boundaries in motion. This equation is reviewed for situations where the linearization of the governing equations is allowed. In addition, research on the application of this equation to problems of aeroacoustic is briefly surveyed. Particular attention is given to the formulation of supersonic sources moving in uniform propeller-like motion.

Farassat, F.↗
NASA NTRS1986

Aerodynamics Via Acoustics: Application of Acoustic Formulas for Aerodynamic Calculations

Prediction of aerodynamic loads on bodies in arbitrary motion is considered from an acoustic point of view, i.e., in a frame of reference fixed in the undisturbed medium. An inhomogeneous wave equation which governs the disturbance pressure is constructed and solved formally using generalized function theory. When the observer is located on the moving body surface there results a singular linear integral equation for surface pressure. Two different methods for obtaining such equations are discussed. Both steady and unsteady aerodynamic calculations are considered. Two examples are presented, the more important being an application to propeller aerodynamics. Of particular interest for numerical applications is the analytical behavior of the kernel functions in the various integral equations.

Farassat, F.↗
NASA NTRS1985

Theoretical analysis of linearized acoustics and aerodynamics of advanced supersonic propellers

The derivation of a formula for prediction of the noise of supersonic propellers using time domain analysis is presented. This formula is a solution of the Ffowcs Williams-Hawkings equation and does not have the Doppler singularity of some other formulations. The result presented involves some surface integrals over the blade and line integrals over the leading and trailing edges. The blade geometry, motion and surface pressure are needed for noise calculation. To obtain the blade surface pressure, the observer is moved onto the blade surface and a linear singular integral equation is derived which can be solved numerically. Two examples of acoustic calculations using a computer program are currently under development.

Farassat, F.↗
NASA NTRS1984

The unified acoustic and aerodynamic prediction theory of advanced propellers in the time domain

This paper presents some numerical results for the noise of an advanced supersonic propeller based on a formulation published last year. This formulation was derived to overcome some of the practical numerical difficulties associated with other acoustic formulations. The approach is based on the Ffowcs Williams-Hawkings equation and time domain analysis is used. To illustrate the method of solution, a model problem in three dimensions and based on the Laplace equation is solved. A brief sketch of derivation of the acoustic formula is then given. Another model problem is used to verify validity of the acoustic formulation. A recent singular integral equation for aerodynamic applications derived from the acoustic formula is also presented here.

Farassat, F.↗
NASA NTRS1984

A new aerodynamic integral equation based on an acoustic formula in the time domain

An aerodynamic integral equation for bodies moving at transonic and supersonic speeds is presented. Based on a time-dependent acoustic formula for calculating the noise emanating from the outer portion of a propeller blade travelling at high speed (the Ffowcs Williams-Hawking formulation), the loading terms and a conventional thickness source terms are retained. Two surface and three line integrals are employed to solve an equation for the loading noise. The near-field term is regularized using the collapsing sphere approach to obtain semiconvergence on the blade surface. A singular integral equation is thereby derived for the unknown surface pressure, and is amenable to numerical solutions using Galerkin or collocation methods. The technique is useful for studying the nonuniform inflow to the propeller.

Farassat, F.↗
NASA NTRS1984

Solution of the wave equation for open surfaces involving a line integral over the edge

A simple mathematical model of a stationary source distribution for the supersonic-propeller noise-prediction formula of Farassat (1983) is developed to test the validity of the formula solutions. The conventional thickness source term is used in place of the Isom thickness formula; the relative importance of the line and surface integrals in the solutions is evaluated; and the numerical results are compared with those obtained with a conventional retarded-time solution in tables. Good agreement is obtained over elevation angles from 10 to 90 deg, and the line-integral contribution is found to be significant at all elevation angles and of the same order of magnitude as the surface-integral contribution at angles less than 30 deg. The amplitude-normalized directivity patterns for the four cases computed (x = 1.5 or 10; k = 5.0 or 50) are presented graphically.

Farassat, F.↗