Engineering Papers⌕ Search

Engineering topics

Fang, Chao

Publications and source records attributed to Fang, Chao.

33 records · Page 2

The Transference Number

The performance of rechargeable batteries and other electrochemical systems depends on the rate at which the working ion (often a cation) is transported from one electrode to the other. The cation transference number is an important transport parameter that affects this rate. The purpose of this perspective is to distinguish between approximate and rigorous methods used in the literature to measure the transference number. We emphasize the fact that this parameter is dependent on the reference frame used in the analysis; care must be taken when comparing values obtained from different sources to account for differences in reference frames. We present data obtained from a well‐characterized electrolyte. We compare rigorously determined transference numbers in two reference frames with values obtained by an approximate method. We conclude with a qualitative discussion of the relationship between the transference number and salt concentration gradients that are obtained when current is drawn through a battery.

Gao, Kevin W.↗

Establishing a unified framework for ion solvation and transport in liquid and solid electrolytes

Electrolytes used in rechargeable batteries must enable rapid translation of the working ion between macroscopically separated electrodes. These electrolytes are, however, usually designed and synthesized using atomic-level insights. Whether the ideal electrolyte for a particular battery is a solid or a liquid remains an important unresolved question, especially as solids with conductivities comparable with liquids are discovered. Here, to help resolve such questions, we present the first steps toward a unified framework for relating atomic and continuum scale phenomena. Solvation shells in liquids are entities that translate with the working ion for a short while before they break up due to Brownian motion. By contrast, solvation cages in classical solids and polymers cannot not translate with the working ion. Mobility of the entities that make up the cages and shells, which is quantified by an order parameter, is shown to influence translation of the working ion on continuum length scales.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Fidelity Two-Qubit Gates Using a Microelectromechanical-System-Based Beam Steering System for Individual Qubit Addressing

In a large scale trapped atomic ion quantum computer, high-fidelity two-qubit gates need to be extended over all qubits with individual control. We realize and characterize high-fidelity two-qubit gates in a system with up to four ions using radial modes. The ions are individually addressed by two tightly focused beams steered using microelectromechanical system mirrors. We deduce a gate fidelity of 99.49(7)% in a two-ion chain and 99.30(6)% in a four-ion chain by applying a sequence of up to 21 two-qubit gates and measuring the final state fidelity. Our team characterizes the residual errors and discuss methods to further improve the gate fidelity towards values that are compatible with fault-tolerant quantum computation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study on impact of Cr and Mo on diffusion of H in 2.25Cr1Mo steel using first-principle calculations

Chrome-molybdenum steel (2.25Cr1Mo steel) is one of the main materials of a steam generator (SG) in high-temperature reactor-pebblebed modules (HTR-PM). It is essential to analyze the source term of tritium in this material, because the behavior of tritium in a SG is important for performing source term analysis in normal and accident conditions. In this article, the diffusion behavior of H atom in 2.25Cr1Mo steel was calculated to estimate the diffusivity of tritium using first-principles density functional theory. To develop and simplify the model of hydrogen diffusion in 2.25Cr1Mo steel, the impact of Cr and Mo on the diffusion of hydrogen in bcc-Fe were first calculated, all the possible diffusion paths were considered, and the minimum energy path was obtained. The diffusion activation energy and pre-exponential factor of the diffusion coefficient were obtained from Vienna Ab initio Simulation Package combined with the climbing image-nudged elastic band method. Here the results indicate that the minimum energy path for the impurity H atom is from one tetrahedral interstitial site to an adjacent tetrahedral interstitial site. The function of the diffusion coefficient of H in 2.25Cr1Mo steel with temperature T can be expressed as D = 1.486 X 10 -7 x ($\frac{-16.350kJ/mol}{RT}$) (M2/s). The diffusion coefficient of our calculation and some of the previous experiments have an excellent quantitative agreement, which indicates the reliability of our crystalline model and the practicability of the present theoretical approach. More importantly, the computational results in this work can be treated as a good screening method to collect reasonable experimental data, which will provide a good reference for tritium source term evaluation in the SG of the HTR-PM.

36 MATERIALS SCIENCE↗

The Role of Disjoining Pressure and Thermal Activation in the Invasion of Droplets into Nanopores

Multiphase transport at a nanoscale level plays a key role in applications including drying of nanoporous materials and gas/oil recovery from low permeability rocks. A frequently encountered scenario in multiphase transport is the presence of droplets near nanopores. Whether droplets invade the nanopores or become trapped at their entrance greatly affects the operation of engineered systems. Here we analyze the free energy profile of nanometer-sized droplets entering the nanopore and how the profile is affected by the pressure difference and the size of the droplet and the nanopore. We show that, for nanopores whose surface is fully wetted by water but not the droplet, a droplet larger than the pore diameter must overcome a higher free energy barrier than that predicted by classical theories due to the large disjoining pressure. For smaller nanodroplets, the threshold pressure for their invasion into a given nanopore can be lowered by thermal activation. When a droplet is slightly narrower than a pore, and thus is often assumed to enter the pore freely, a large energy barrier for droplet entry can actually exist. The droplet cannot easily enter the pore even with hydrodynamic drag by moving fluids. Entering the pore through Brownian motion is possible, and the mean entry time depends sensitively on the pore size and can reach seconds or even longer. These findings provide molecular insights on the invasion of droplets into nanopores and lay foundations for large-scale modeling of multiphase nanofluidic transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Structure and Dynamics of Interfacial Polymerized Ionic Liquids

Polymerized ionic liquids (polyILs) hold great promise for applications in energy conversion and storage. Many of these applications are underpinned by the structures and processes at the interface between polyILs and solid surfaces; however, the interfacial behavior of polyILs remains largely unexplored. Here, we report the molecular simulation results of poly(1-butyl-3-vinylimidazolium hexafluorophosphate) supported on neutral and charged quartz substrates. It is found that the structure of interfacial polyILs deviates greatly from that of bulk polyILs, affected by the distance from the substrate and the surface charge on the substrate. Particularly, the coordination of interfacial anions by the cations differs from that in the bulk since their coordination environment, e.g., conformation and clustering of polymer chains and their pendant cations, is greatly modified by the confinement at the substrate and the electrostatic polyIL-substrate interactions. Similar to the bulk anions, the interfacial anions diffuse mainly by intra-chain hopping, but at a rate much slower than in the bulk due to the slow decay of the association between interfacial anions and their neighboring cations, which can be traced to the unique structure of polymer chains and cations near the quartz surfaces.

36 MATERIALS SCIENCE↗

Solvate Ionic Liquids at Electrified Interfaces

Solvate ionic liquids (SILs) are a promising electrolyte for Li-ion batteries; thus, their behavior at electrified interfaces is crucial for the operation of these batteries. We report molecular dynamics simulation results for a prototypical SIL of lithium triglyme bis(trifluoro-methanesulfonyl)imide ([Li(G3)][TFSI]) sandwiched between electrified surfaces. At negatively charged as well as neutral electrodes, the electrolyte largely maintains the characteristics of SILs, e.g., a majority of the interfacial Li + ions remains coordinated by the similar number of oxygen atoms on G3 ligands as the bulk Li + ions. The persistence of the complex ions is attributed to the 1:1 Li-G3 ratio in bulk SILs and the fact that G3 molecules readily adapt to the interfacial environment, e.g., by aligning themselves with the surface to ensure good solvation of the interfacial Li + ions. Nevertheless, the interfacial Li + ions also display changes of solvation from that in bulk SIL by deviating from the molecular plane formed by the oxygen atoms on G3 ligands as electrodes become more negatively charged. Using density functional theory along with natural bond orbital calculations, we examine the effects of such structural distortion on the properties of the complex cation. Both the frontier orbital energies of the complex cation and the donor-acceptor interactions between Li + ions and G3 ligands are found to be dependent on the deviation of Li + ions from the molecular plane of the G3 ligands, which suggest that the reduction of Li + ions should be facilitated by the structural distortion. These results bear important implications for the nanostructures and properties of SILs near electrified interfaces during actual operations of Li-ion batteries and serve to provide guidance toward the rational design of new SILs electrolytes.

25 ENERGY STORAGE↗

The orphan G protein-coupled receptor 25 (GPR25) is activated by Apelin and Apela in non-mammalian vertebrates

Highlights: • The orphan receptor GPR25 was cloned from zebrafish, pigeons and spotted gars. • GPR25 is activated by Apelin and Apela in non-mammalian vertebrates. • Like Apelin receptor, GPR25 is coupled to Gi-cAMP signaling pathway. • GPR25 mRNA is widely expressed in zebrafish/spotted gar/human tissues. G protein-coupled receptor 25 (GPR25) is an orphan G protein-coupled receptor in vertebrates, that has been implicated to be associated with autoimmune diseases and regulate blood pressure in humans. However, the endogenous ligand of GPR25 remains unknown in vertebrates. Here, we reported that in non-mammalian vertebrates (zebrafish, spotted gars, and pigeons), GPR25 could be activated by Apelin and Apela peptides, which are also the two endogenous ligands of vertebrate Apelin receptor (APLNR). Using the pGL3-CRE-luciferase reporter assay and confocal microscopy, we first demonstrated that like APLNR, zebrafish GPR25 expressing in HEK293 cells could be effectively activated by zebrafish Apelin and Apela peptides, leading to the inhibition of forskolin-stimulated cAMP production and receptor internalization. Like zebrafish GPR25, pigeon and spotted gar GPR25 could also be activated by Apelin and Apela, and their activation could inhibit forskolin-induced cAMP accumulation. Interestingly, unlike zebrafish (/spotted gar/pigeon) GPR25, human GPR25 could not be activated by Apelin and Apela under the same experimental conditions. RNA-seq analysis further revealed that GPR25 is expressed in a variety of tissues, including the testes and intestine of zebrafish/spotted gars/humans, implying the potential roles of GPR25 signaling in many physiological processes in vertebrates. Taken together, our data not only provides the first proof that the orphan receptor GPR25 possesses two potential ligands ‘Apelin and Apela’ and its activation decreases intracellular cAMP levels in non-mammalian vertebrates, but also facilitates to unravel the physiological roles of GPR25 signaling in vertebrates.

60 APPLIED LIFE SCIENCES↗

The process heat applications of HTGR in petroleum refining industry: adaptability and economy - 18425

High Temperature Gas Cooled Reactor (HTGR) is considered as a kind of potential heat producer for industry. Since the industrial heat utilization takes 60% of heat supply in China, the process heat of HTGR is more suitable for industrial manufacturing as high temperature heat source. In this article, the adaptabilities of HTGR for heat supply to petroleum refining industry are analyzed and it is found that the joint of process heat of HTGR and chemical industry is most predictable in the near future. For case study, technical and economic analysis of process heat-supply proposal in a typical refinery in China is finished and it is shown that though there is some technical and conceptual challenge, the application of process heat of HTGR in petroleum refining industry is feasible and competitive in economics. (authors)

02 PETROLEUM↗

Pn-FEM Method for Solving the First-Order Neutron Transport Equation

A deterministic method was investigated and developed for the photon-neutron transport calculation for fusion reactor blanket. Firstly, considering the fact that the second order transport equation cannot describe void region accurately due to the appearance of zero total cross section in the denominator, the first order equation was selected as the starting point of the solution. The angular discretization uses the spherical harmonics (Pn) method. Although discrete ordinates (Sn) method has been most commonly applied due to its efficiency, it suffers from the ray effect. To describe unstructured geometry, the finite element method was used to discrete spatial variable. It is well known that Bubnov-Galerkin discretization of the first-order equation is inappropriate which will create oscillations. To obtain robust solutions, Petrov- Galerkin methods have been developed such as the Streamline-Upwind Petrov-Galerkin (SUPG) method and the Generalized Least-Squares (GLS) method. These methods require a stabilization term added to its test functions, which will incur additional computational cost. Another finite element formulation that usually used for first order equation is the Discontinuous-Galerkin (DG) method. In this method, each element has a unique and separate set of basis function. Then the adjacent elements can be connected by using the in-coming flux. Its main drawback is the number of unknowns, much larger than Continuous-Galerkin (CG) method. The Sub-Grid Scale (SGS) finite element method combines the advantages of CG and DG methods together. It inserts the DG method in each element to correct the CG solution, and provides numerically stable solution of first-order equation without increasing the number of unknowns. The boundary conditions and interface conditions for Pn method is a hard nut to crack. We use Riemann method to deal with this problem. It decomposes the neutron angular flux into in-coming and out-going information through an interface, and applies boundary condition to the in-coming one. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Platycodin D inhibits tumor growth by antiangiogenic activity via blocking VEGFR2-mediated signaling pathway

Platycodin D (PD) is an active component mainly isolated from the root of Platycodon grandiflorum. Recent studies proved that PD exhibited inhibitory effect on proliferation, migration, invasion and xenograft growth of diverse cancer cell lines. However, whether PD is suppressive for angiogenesis, an important hallmark in cancer development, remains unknown. Here, we found that PD could dose-dependently inhibit human umbilical vein endothelial cell (HUVEC) proliferation, motility, migration and tube formation. PD also significantly inhibited angiogenesis in the chick embryo chorioallantoic membrane (CAM). Moreover, the antiangiogenic activity of PD contributed to its in vivo anticancer potency shown in the decreased microvessel density and delayed growth of HCT-15 xenograft in mice with no overt toxicity. Western blot analysis indicated that PD inhibited the phosphorylation of VEGFR2 and its downstream protein kinase including PLCγ1, JAK2, FAK, Src, and Akt in endothelial cells. Molecular docking simulation showed that PD formed hydrogen bonds and hydrophobic interactions within the ATP binding pocket of VEGFR2 kinase domain. The present study firstly revealed the high antiangiogenic activity and the underlying molecular basis of PD, suggesting that PD may be a potential antiangiogenic agent for angiogenesis-related diseases. - Highlights: • Platycodin D inhibits HUVEC proliferation, motility, migration and tube formation. • Platycodin D inhibits the angiogenesis in chick embryo chorioallantoic membrane. • Platycodin D suppresses the angiogenesis and growth of HCT-15 xenograft in mice. • Platycodin D inhibits the phosphorylation of VEGFR2 and downstream kinases in HUVEC.

60 APPLIED LIFE SCIENCES↗