Engineering Papers⌕ Search

Engineering topics

Evans, Diane L.

Publications and source records attributed to Evans, Diane L..

24 records · Page 2

Microwave dielectric properties of dry rocks

A combination of techniques was used to measure the dielectric properties of 80 rock samples in the microwave region. The real part (RP) of the relative dielectric constant was measured in 0.1-GHz steps from 0.5 to 18 GHz, and the imaginary part (IP) was measured at five frequencies between 1.6 and 16 GHz. The bulk density rho(b) was also measured for all the samples, and the bulk chemical composition (BCC) was determined for 56 of the samples. RP is found to be frequency-independent at 0.5-18 GHz for all samples, and rho(b) accounts for about 50 percent of the observed variance. For silicate rocks, as much as 78 percent of the variance is explained by the combination of rho(b) and the fractional contents of oxides when the silicates are subgrouped by genesis. In contrast, IP decreases with increasing frequency for most rock samples, and no statistically significant relationships are found between IP and rho(b). For subgrouped silicate rocks, 60 percent of the variance in IP can be explained by BCC.

Ulaby, Fawwaz T.↗

Processing Of Multispectral Data For Identification Of Rocks

Linear discriminant analysis and supervised classification evaluated. Report discusses processing of multispectral remote-sensing imagery to identify kinds of sedimentary rocks by spectral signatures in geological and geographical contexts. Raw image data are spectra of picture elements in images of seven sedimentary rock units exposed on margin of Wind River Basin in Wyoming. Data acquired by Landsat Thematic Mapper (TM), Thermal Infrared Multispectral Scanner (TIMS), and NASA/JPL airborne synthetic-aperture radar (SAR).

Evans, Diane L.↗

Recent advances in airborne terrestrial remote sensing with the NASA airborne visible/infrared imaging spectrometer (AVIRIS), airborne synthetic aperture radar (SAR), and thermal infrared multispectral scanner (TIMS)

Significant progress in terrestrial remote sensing from the air has been made with three NASA-developed sensors that collectively cover the solar-reflected, thermal infrared, and microwave regions of the electromagnetic spectrum. These sensors are the airborne visible/infrared imaging spectrometer (AVIRIS), the thermal infrared mapping spectrometer (TIMS) and the airborne synthetic aperture radar (SAR), respectively. AVIRIS and SAR underwent extensive in-flight engineering testing in 1987 and 1988 and are scheduled to become operational in 1989. TIMS has been in operation for several years. These sensors are described.

Vane, Gregg↗

Color composite processing of multi-wavelength, multi-polarization airborne radar imagery

Multiwavelength, multipolarization radar image data can be processed to allow the clear depiction of most information in color composite displays. The first principal component, depicted as variations in image intensity, captures the dominant variation in the data and reduces noise without degradation of spatial detail. Other principal components, depicted primarily as variations in image chromaticity, are derived from spatially filtered data so that image colors can be attributed to significant wavelength and polarization contrasts, and not to speckle. Processing paths can be designed to emphasize wavelength contrasts, polarization contrasts, or overall discrimination of surface features.

Crippen, Robert E.↗

Radar polarimetry - Analysis tools and applications

The authors have developed several techniques to analyze polarimetric radar data from the NASA/JPL airborne SAR for earth science applications. The techniques determine the heterogeneity of scatterers with subregions, optimize the return power from these areas, and identify probable scattering mechanisms for each pixel in a radar image. These techniques are applied to the discrimination and characterization of geologic surfaces and vegetation cover, and it is found that their utility varies depending on the terrain type. It is concluded that there are several classes of problems amenable to single-frequency polarimetric data analysis, including characterization of surface roughness and vegetation structure, and estimation of vegetation density. Polarimetric radar remote sensing can thus be a useful tool for monitoring a set of earth science parameters.

Evans, Diane L.↗

Geological applications of multipolarization SAR data

Spaceborne Synthetic Aperture Radar (SAR) data acquired by SEASAT and the Shuttle Imaging Radar (SIR-A/B) operating at L-band with HH polarization were found to be useful in conjunction with other sensors for lithologic discrimination in arid environments with limited vegetation cover. In order to assess the utility of more advanced sensors for geologic research and define the unique contributions each sensor makes, remote sensing data were collected over the Deadman Butte area of the Wind River Basin, Wyoming. The Wind River Basin is an asymmetric sedimentary basin in central Wyoming created during the early Eocene Laramide orogeny. The stratigraphic section of the Deadman Butte study area, which was measured by Woodward is made up of Paleozoic and Mesozoic marine shales, siltstones, limestones, and sandstones. Sensor systems included LANDSAT 4 Thematic Mapper (TM), Thermal Infrared Multispectral Scanner (TIMS) and the Multipolarization, L-band airborne SAR, a prototype for the next Shuttle Imaging Radar (SIR-C). Sensor parameters are given.

Evans, Diane L.↗