Engineering topics
Publications and source records attributed to Esquivel, M. S..
Paper covers the poor low-frequency performance of geometrically designed beam-waveguide antennas,and a novel design technique for solving this poor performance. A unique application was made of the conjugate phase-matching techniques to obtain the desired solution.
The poor low-frequency performance of geometrically designed beam-waveguide (BWG) antennas is shown to be caused by the diffraction phase centers being far from the geometrical optics mirror focus, resulting in substantial spillover and defocusing loss. Two novel solutions are proposed: (1) reposition the mirrors to focus low frequencies and redesign the high frequencies to utilize the new mirror positions, and (2) redesign the input feed system to provide an optimum solution for the low frequency. A novel use of the conjugate phase-matching technique is utilized to design the optimum low-frequency feed system, and the new feed system has been implemented in the JPL research and development BWG as part of a dual S-/X-band (2.3 GHz/8.45 GHz) feed system. The new S-band feed system is shown to perform significantly better than the original geometrically designed system.
Calculations using Physical Optics computer software were done to optimize the gain-to-noise-temperature (G/T) ratio of Deep Space Station (DSS)-13, the Deep Space Network's (DSN's) 34-m beam-waveguide antenna, at X-band for operation with the ultra-low-noise amplifier maser system. A better G/T value was obtained by using a 24.2-dB far-field-gain smooth-wall dual-mode horn than by using the standard X-band 22.5-dB-gain corrugated horn.
A beam waveguide (BWG) design suitable for high-power applications is described. The design features a transmit-only, four-port high-gain horn as input to a BWG system with a single parabolic mirror and three flat plates. The use of a single parabolic mirror is such that the highest field concentration is no greater than that caused by the horn itself. The horn is linearly polarized and a grid reflector is used to reflect the orthogonal polarization into the receive feed. A rotatable dual polarizer provides for arbitrary transmit polarization. The dual-reflector system is shaped to provide uniform illumination over the main reflector and therefore maximum gain for the given size aperture. Measured data from a scale model BWG system are presented.