Engineering Papers⌕ Search

Engineering topics

Erwan Mazarico

Publications and source records attributed to Erwan Mazarico.

47 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

New Topographic Products for the Lunar South Pole from the Lunar Orbiter Laser Altimeter (LOLA)

Due to the Moon’s low obliquity and highly cratered topography, its polar environments host regions of extreme illumination conditions. Multiple lines of evidence indicate the presence of geologically stable ice and other volatiles on or below the surface within polar permanently shadowed regions (PSRs). These regions are valuable targets for science and exploration as they hold clues to the history of water in the inner solar system and may hold sufficient reserves for in-situ resource utilization. Standing high above the PSRs, peaks of long-duration sunlight are oases where landed assets can easily generate power and communicate. For these reasons, the lunar south pole is the target of many upcoming missions including NASA’s Artemis program. The Lunar Orbiter Laser Altimeter (LOLA) onboard the Lunar Reconnaissance Orbiter (LRO) provides the global geodetic framework with which past, present, and future missions can accurately geolocate their data. Laser altimeters like LOLA are unaffected by shadows and, therefore, provide the most direct measurements of topography within PSRs. Here we present the latest work to improve LOLA’s polar topographic maps and resulting derived products, such as PSR maps, which are crucial tools for science and exploration of the polar regions

Michael K Barker↗
NASA NTRSDate not supplied

Gravity Science With the Uranus Orbiter

The Cassini and Juno missions have considerably expanded our understanding of Saturn, Jupiter, and their moons. The spacecraft radio tracking data acquired by the NASA Deep Space Network (DSN) have enabled the accurate measurement of gravitational perturbations of these planetary bodies on the spacecraft trajectory. The inferred static zonal gravity fields have been key in understanding the interior structure and dynamics within Jupiter and Saturn. Repeated flybys of moons such as Titan and Enceladus can also constrain their interior properties, putting constraints on their formation and evolution, and potential habitability. The exploration of the Uranus system by NASA’s future flagship mission (Uranus Orbiter and Probe, UOP) holds the promise of making similar gains for Uranus and its moons. Here we address the gravity science that may be possible with UOP.

Erwan Mazarico↗
NASA NTRSDate not supplied

Development of Concurrent Artificially-Intelligent Spectrometry and Adaptive Lidar System (CASALS) for Swath Mapping From Space

We present the design and performance of a Concurrent Artificially-intelligent Spectrometry and Adaptive Lidar System (CASALS) for 3D imaging from Space. With a single fast wavelength tuning laser, CASALS accomplishes a 1,200 resolvable spots swath mapping by grating dispersion wavelength steering. Any subset of these 1,200 spots can be selected by wavelength switching. The validation operating principle was accomplished and reported in IGASS-2022. With configurable base design, we report the designs and progress of the CASALS airplane campaign with 256 contiguous ground spots. It is accomplished with a single fast tuning lase at 1040-nm, 1.152MHz tuning rate, and pulse modulated 2-ns on each wavelength. Return pulses are mapped to an eight-pixel detector array with single-photon sensitivity. The lidar returns are time-multiplexed to two outputs that are digitized with two 1-GSPS-digitizer. A grating spectrometer rejects solar background noise spatially and spectrally. We are developing a 1040-nm CASALS intended for multiple LEO orbit missions: Earth Venture Mission on ESPA Grande, STV Mission on ESPA Grande SmallSat, STV Mission on spacecraft equivalent to ICESat power (SWaP,) and splitting the laser beam requires higher laser pulse energy.

ranging lidar↗
NASA NTRSDate not supplied

Assessing the Relocation of Artemis Foundational Lunar Surface Concepts

The National Aeronautics and Space Administration (NASA) has defined a functionally based Moon to Mars (M2M) architecture consisting of four key human exploration segments: human lunar return (HLR), foundational exploration (FE), sustained lunar evolution (SLE), and humans to Mars (H2M). These segments are portions of the architecture which represent a stepwise increase in complexity and achievement of M2M objectives [1]. As systems are deployed during the FE segment, it may be desired or even necessary to relocate these elements on the lunar surface as the architecture transitions into the SLE segment. While some Artemis elements under development, such as rovers, are being designed for mobility during both crewed and uncrewed/dormant periods, other architectural concepts do not currently carry a mobility capability. In preparation for the Agency’s 2023 Architecture Concept Review (ACR), a team was assembled to establish a methodology for assessing the relocation feasibility of normally stationary elements. Such a capability could be applied locally or regionally, and might allow for re-purposing previously occupied terrain, expansion of exploration range, aggregation of habitation elements, or retiring systems at the end of their useful service life. The assembled NASA team investigated the relocation trade space through defining a representative concept of operations (ConOps) and assessing possible system impacts. The team focused predominately on the relocation of medium and large surface habitat architectural concepts through surface-based traverses utilizing separable mobility platforms (SMP). A representative mobility platform model was placed through simulation to analyze the possible energy requirements and dynamic illumination impacts. Preliminary assessment indicated that element relocation might be achievable, however significant system and architectural-level risks still need to be quantified. Future analysis will assist in determining what degree of element relocation provides the greatest benefit to achieving a sustained lunar presence. [1] NASA. (2022). Moon to Mars Objectives. Retrieved from: https://www.nasa.gov/sites/default/files/atoms/files/m2m-objectives-exec-summary.pdf

Artemis↗
NASA NTRSDate not supplied

Technology Transfer Plan: LuNaMaps Project

The main contribution of this project is the combined knowledge of terrain relative navigation experts and lunar scientists who are familiar with both the lunar orbital imagery and the instruments that collected the data as well as how a TRN system utilizes map data. This knowledge comes in the form of published technical papers, benchmark map data sets, and software tools that can help others automate the process of creating the necessary maps for their own landing sites in the future. This document represents the project's plans to share all the lessons learned, processes developed, and applicable software tools with the public.

optical navigation↗
NASA NTRSDate not supplied

The LuNaMaps Project: Advancing Capabilities for Developing and Validating Digital Elevation Models of Rocky Surfaces from Orbital Data

Both navigation and surface science can benefit from the ability to generate high resolution and accurate maps of the surface of the Moon and other solar system bodies. The primary way these maps are generated is through the use of orbital imagery and ranging data. Traditionally, the process of using orbital imagery and ranging data is tedious and labor-intensive. Additionally, once maps have been built, there has generally been limited effort in developing standards by which to verify the accuracy and quality of the generated maps. The Lunar Navigation Maps (LuNaMaps) project is a NASA Game Changing Development (GCD) project which over the last 4 years has aimed to address these issues both for the Moon and for other rocky solar system bodies. This has been accomplished through development of new and existing capabilities including: a suite of methods and tools to combine all sources of orbital imagery; a benchmark data set as well as basic requirements for high-fidelity simulations of precision landing functions; tools to synthetically enhance map products with lander-scale features for use in the development and testing of hazard detection systems; methods and tools to evaluate the accuracy of developed digital elevation maps (DEMs) and their quality for use in terrain relative navigation scenarios; and tools to realistically render image and lidar data. In this work, we provide an overview of the capabilities developed through LuNaMaps, demonstrating its use for processing existing lunar data, and describing how it can be applied to other use cases. We additionally provide preliminary results showing the application of the developed tools and processes to the generation of elevation maps of the Lunar Surface Proving Grounds (LSPG) lunar analog at Astrobotic’s Mojave testing facility using “orbital imagery” captured by a drone. In this terrestrial demonstration, we have the benefit of being able to compare the results to a ground truth model of the LSPG. We finally describe plans to use the newly created maps in a terrestrial terrain relative navigation demonstration over the LSPG in early 2025.

optical navigation↗