Engineering topics

Erickson, C. M.

Publications and source records attributed to Erickson, C. M..

6 records

NASA NTRS1992

Orbit transfer rocket engine technology program: Advanced engine study

In Task D.6 of the Advanced Engine Study, three primary subtasks were accomplished: (1) design of parametric data; (2) engine requirement variation studies; and (3) vehicle study/engine study coordination. Parametric data were generated for vacuum thrusts ranging from 7500 lbf to 50,000 lbf, nozzle expansion ratios from 600 to 1200, and engine mixture ratios from 5:1 to 7:1. Failure Modes and Effects Analysis (FMEA) was used as a departure point for these parametric analyses. These data are intended to assist in definition and trade studies. In the Engine Requirements Variation Studies, the individual effects of increasing the throttling ratio from 10:1 to 20:1 and requiring the engine to operate at a maximum mixture ratio of 12:1 were determined. Off design engine balances were generated at these extreme conditions and individual component operating requirements analyzed in detail. Potential problems were identified and possible solutions generated. In the Vehicle Study/Engine Study coordination subtask, vehicle contractor support was provided as needed, addressing a variety of issues uncovered during vehicle trade studies. This support was primarily provided during Technical Interchange Meetings (TIM) in which Space Exploration Initiative (SEI) studies were addressed.

Erickson, C. M.↗

NASA NTRS1991

Orbit transfer rocket engine technology program: Automated preflight methods concept definition

The possibility of automating preflight engine checkouts on orbit transfer engines is discussed. The minimum requirements in terms of information and processing necessary to assess the engine'e integrity and readiness to perform its mission were first defined. A variety of ways for remotely obtaining that information were generated. The sophistication of these approaches varied from a simple preliminary power up, where the engine is fired up for the first time, to the most advanced approach where the sensor and operational history data system alone indicates engine integrity. The critical issues and benefits of these methods were identified, outlined, and prioritized. The technology readiness of each of these automated preflight methods were then rated on a NASA Office of Exploration scale used for comparing technology options for future mission choices. Finally, estimates were made of the remaining cost to advance the technology for each method to a level where the system validation models have been demonstrated in a simulated environment.

Erickson, C. M.↗

NASA NTRS1988

High variable mixture ratio oxygen/hydrogen engine

The ability of an O2/H2 engine to operate over a range of high-propellant mixture ratios was previously shown to be advantageous in single stage to orbit (SSTO) vehicles. The results are presented for the analysis of high-performance engine power cycles operating over propellant mixture ratio ranges of 12 to 6 and 9 to 6. A requirement to throttle up to 60 percent of nominal thrust was superimposed as a typical throttle range to limit vehicle acceleration as propellant is expended. The object of the analysis was to determine areas of concern relative to component and engine operability or potential hazards resulting from the operating requirements and ranges of conditions that derive from the overall engine requirements. The SSTO mission necessitates a high-performance, lightweight engine. Therefore, staged combustion power cycles employing either dual fuel-rich preburners or dual mixed (fuel-rich and oxygen-rich) preburners were examined. Engine mass flow and power balances were made and major component operating ranges were defined. Component size and arrangement were determined through engine layouts for one of the configurations evaluated. Each component is being examined to determine if there are areas of concern with respect to component efficiency, operability, reliability, or hazard. The effects of reducing the maximum chamber pressure were investigated for one of the cycles.

Erickson, C. M.↗

NASA NTRS1986

Concepts for space maintenance of OTV engines

Concepts for space maintainability of the Orbital Transfer Vehicle (OTV) engines are examined. An engine design is developed which is driven by space maintenance requirements and by a failure modes and effects analysis (FMEA). Modularity within the engine is shown to offer cost benefits and improved space maintenance capabilities. Space-operable disconnects are conceptualized for both engine change-out and for module replacement. A preliminary space maintenance plan is developed around a controls and condition monitoring system using advanced sensors, controls, and condition monitoring concepts.

Martinez, A.↗

NASA NTRS1986

Concepts for space maintenance of OTV engines

Concepts for space maintainability of OTV engines are examined. The advanced efforts are based on work recently completed for NASA Lewis Research Center Space Propulsion Technology Division. An engine design is developed which is driven by space maintenance requirements and by a failure modes and effects analysis. Modularity within the engine is shown to offer cost benefits and improved space maintenance capabilities. Space-operable disconnects are conceptualized for both engine change-out and for module replacement. Through FME mitigation the modules are conceptualized to contain the most often replaced engine components. A preliminary space maintenance plan is developed around a controls and condition monitoring system using advanced sensors, controls, and conditioning monitoring concepts.

Martinez, A.↗

NASA NTRS1986

Concepts for space maintenance of OTV engines

In this paper, concepts for space maintainability of Orbital Transfer Vehicles engines are examined. An engine design is developed which is driven by space maintenance requirements and by a Failure Modes and Effects Analysis (FMEA). Modularity within the engine is shown to offer cost benefits and improved space maintenance capabilities. Space-operable disconnects are conceptualized for both engine change-out and for module replacement. Through FME mitigation the modules are conceptualized to contain the most often replaced engine components. A preliminary space maintenance plan is developed around a Controls and Condition Monitoring system using advanced sensors, controls, and conditioning monitoring concepts.

Martinez, A.↗