Engineering Papers⌕ Search

Engineering topics

Eren, Baran

Publications and source records attributed to Eren, Baran.

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Chemical state of nickel nanoparticles during the oxygen evolution reaction in a carbonate-bicarbonate buffer solution

The chemical state of nickel anodes during the oxygen evolution reaction can impact their electrocatalytic performance. Here, X-ray photoelectron and absorption spectroscopies reveal the chemical state of nickel nanoparticles under oxygen evolution reaction conditions in amildly alkaline carbonate-bicarbonate buffer solution. Ni 2+ and Ni 3+ species are observed at the reaction onset potential with a 7:4 ratio, with no remaining metallic nickel. These species include NiO, which increasingly converts to other Ni 2+ and Ni 3+ species once the potential is increased above the onset potential. Conversely, when a 20-nm-thick nickel film is used instead of nickel nanoparticles, a significant amount of metallic nickel remains in the inner layers. Nickel nanoparticles also undergo significant morphological and structural changes during the reaction, as evidenced by ex situ transmission electron microscopy. Amorphization of the nanoparticles is attributed to significant H 2 O incorporation, with the oxygen intensity increasing both in operando and ex situ measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Molecular-level insights into CO 2 activation on Ni(111) from in situ infrared spectroscopy

The activation of CO 2 on nickel surfaces is the first step of various CO 2 conversion processes. Consequently, understanding the surface intermediates formed during this step and their adsorption sites is crucial for elucidating reaction mechanisms. In this study, we employ in situ infrared spectroscopy to investigate the interaction of 1 mbar CO 2 with a model Ni(111) catalyst between 25°C and 300°C. Under these conditions, CO 2 is activated via a direct dissociation into CO and atomic oxygen, while the oxidation state of the Ni(111) surface is primarily determined by residual H 2 and O 2 . The high surface coverage of CO and oxygen at ambient CO 2 pressure induces a competitive adsorption mechanism on the energetically favored hollow sites. This mechanism leads to a temperature-dependent distribution of CO between top and hollow sites, potentially explaining the effect of reaction conditions on the adsorption site of CO intermediates in CO 2 conversion reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Oxidation and Reduction of Polycrystalline Cerium Oxide Thin Films in Hydrogen

This study investigates the oxidation state of ceria thin films' surface and subsurface under 100 mTorr hydrogen using ambient pressure X-ray photoelectron spectroscopy. We examine the influence of the initial oxidation state and sample temperature (25-450 °C) on the interaction with hydrogen. Our findings reveal that the oxidation state during hydrogen interaction involves a complex interplay between oxidizing hydride formation, reducing thermal reduction, and reducing formation of hydroxyls followed by water desorption. In all studied conditions, the subsurface exhibits a higher degree of oxidation compared to the surface, with a more subtle difference for the reduced sample. The reduced samples are significantly hydroxylated and covered with molecular water at 25 °C. We also investigate the impact of water vapor impurities in hydrogen. We find that although 1 × 10 -6 Torr water vapor oxidizes ceria, it is probably not the primary driver behind the oxidation of reduced ceria in the presence of hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electronic interactions and stability issues at the copper-graphene interface in air and in alkaline solution under electrochemical control

A micro-electrochemical cell is sealed with a polymer-free single-layer graphene (SLG) membrane to monitor the stability of Cu nanoparticles (NPs) attached to SLG, as well as the interfacial electronic interactions between Cu NPs and SLG both in air and in a mildly alkaline aqueous solution under electrochemical control. A combination of techniques, including in-situ Kelvin probe force microscopy (KPFM) and ex-situ electron microscopy, are applied. When Cu NPs are metallic at cathodic potentials, there is a relatively bias-independent offset in the SLG work function due to charge transfer at the Cu-SLG contact. When Cu NPs are oxidized at anodic potentials, on the other hand, the work function of SLG also depends on the applied bias in a quasi-linear fashion due to electrochemical gating, in addition to charge transfer at the CuOx-SLG contact. Furthermore, Cu NPs were found to oxidize and detach from SLG when kept under anodic potentials for a few hours, whereas they remain adhered to SLG at cathodic potentials. This is attributed to water intercalation at the CuO-SLG interface associated with the enhanced hydrophilicity of positively polarized graphene, as supported by the absence of Cu detachment following oxidation by galvanic corrosion in air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Methanol Decomposition on Copper Surfaces under Ambient Conditions: Mechanism, Surface Kinetics, and Structure Sensitivity

Here, we study the adsorption of methanol vapor under ambient pressure and temperature conditions on low-index Cu surfaces using surface-sensitive infrared (IR) and X-ray spectroscopy techniques. The first step of methanol decomposition, i.e. , breaking of the O—H bond to form surface-bound methoxy, readily occurs under ambient conditions. Time-lapse IR spectra clearly indicate a gradually decreasing methoxy coverage, which does not obey well established kinetic models. We rationalize the initial temperature-independent, high, nonequilibrium coverage of methoxy by a H-bonded methanol assembly in the precursor state. A temperature-dependent equilibrium coverage is achieved as the excess methoxy is eliminated gradually via further dehydrogenation to CO that desorbs to the gas phase. The kinetics of this process displays a significant structure sensitivity with considerably faster kinetics on the Cu(110) surface compared to Cu(111) and Cu(100) surfaces.

77 NANOSCIENCE AND NANOTECHNOLOGY↗