Engineering topics
Publications and source records attributed to Epting, William.
Presentation for talk at the 2024 Pacific Rim Meeting of the Electrochemical Society October 6-11, 2024. The talk covers a review of NETL's solid oxide cell (SOC) performance degradation modeling framework and present case studies on how simulations are used to design better SOC electrodes.
Oxygen partial pressure is an important thermodynamic state variable that affects both the performance and degradation of solid oxide electrolysis cells. In this work, a 3D model developed from Virkar’s 1D model has been applied to reconstructed and synthetic microstructures of Ni-YSZ-GDC-LSCF cell. The effect of the microstructures, including the thickness of the YSZ and GDC layer, and the compositions of the hydrogen and oxygen electrode, on the distribution of oxygen partial pressure has been investigated. The results show that the maximum oxygen partial pressure may occur on the interface between oxygen electrode and GDC layer or between GDC layer and YSZ layer depending on the rate of oxygen ion exchange between GDC and YSZ. A thicker GDC layer lowers the maximum oxygen partial pressure in the cell, while a thicker YSZ layer lowers the maximum oxygen partial pressure in the hydrogen electrode. In addition, the Ni:YSZ ratio and porosity also affects the maximum partial pressure. These findings provide insights on mitigating degradation in solid oxide electrolysis cell by tuning the microstructures.
A modeling tool of the defect thermodynamics of (La,Ba)Fe1-xMxO3-δ perovskites which includes energetic information about oxygen vacancy formation, hydration, hydride formation, and charge disproportionation reactions has been developed1. This tool incorporates defect energies and entropies expressed as sixth order polynomial functions to allow refinements of the defect reaction equilibrium constants in the thermodynamic analysis. Calculation of (La,Ba)Fe1-xMxO3-δ Brouwer diagrams as a function of pO2/pH2O and pH2/H2O in a range of temperatures of interest is facilitated by this modeling tool. The results obtained can provide direct guidance how the electronic and ionic defect concentrations of the triple conducting perovskite materials can be used to optimize performance of solid oxide cells for energy applications. The impact of magnetic and electronic structures of the perovskites on the defect reaction energies and entropies as obtained from density function theory modeling and the role played by hydride defect species will also be discussed.
One major degradation mechanism during long-term operation of solid oxide electrolysis cells (SOECs) is delamination of oxygen electrodes (OEs). The driving force for the electrode delamination could be the generated high inner oxygen pressure near the electrode-electrolyte interface during operation. However, the effects of transport properties and electrode thickness on the inner oxygen partial pressure are not well understood. Here, a microstructure-based electrochemical model which includes the conduction of electrons and oxygen ions coupled with Butler-Volmer-type chemical reactions at triple-phase-boundaries (TPBs), is employed to investigate the oxygen pressure in lanthanum strontium manganate (LSM)-based SOECs. The model is applied to both two-dimensional (2D) prototype microstructures and three-dimensional (3D) realistic microstructures, and the oxygen pressure is analyzed as a function of transport properties and electrode thickness under both potentiostatic and galvanostatic operations. The simulation results suggest strategies to suppress electrode delamination. The simulation results are compared to an analytical solution, and the discrepancies are attributed to the Butler-Volmer-type kinetics included in the microstructure-based model.
Ni coarsening and migration is the most important degradation in the hydrogen electrode of solid oxide cells. This presentation reviews our works on Ni coarsening and migration in NETL over the past years. We used simulation techniques including phase-field modeling and density function theory to investigate possible mechanisms of Ni coarsening and migration, including self-diffusion of Ni, diffusion of gaseous Ni(OH)2, surface diffusion of Ni(OH)x and Ni-YSZ wettability change, and examined the effect of operating conditions on these mechanisms. So far, none of the mechanisms can fully explain the experiments. Remaining questions and possible paths forward are summarized and discussed.