Engineering Papers⌕ Search

Engineering topics

Enick, RM

Publications and source records attributed to Enick, RM.

A Combined Experimental and Computational Study on Selected Physical Properties of Aminosilicones

A number of physical properties of aminosilicones have been determined experimentally and predicted computationally. It was found that COSMO-RS predicted the densities of the materials under study to within about 4% of the experimentally determined values. Vapor pressure measurements were performed, and all of the aminosilicones of interest were found to be significantly less volatile than the benchmark MEA material. COSMO-RS was reasonably accurate for predicting the vapor pressures for aminosilicones that were thermally stable. The heat capacities of all aminosilicones tested were between 2.0 and 2.3 J/(g.degrees C); again substantially lower than a benchmark 30% aqueous MEA solution. Surface energies for the aminosilicones were found to be 23.3-28.3 dyne/cm and were accurately predicted using the parachor method.

Perry, RJ↗

CO2 Capture Using Phase-Changing Sorbents

A novel method for the postcombustion capture of CO2 from coal-fired power plants has been described utilizing an aminosilicone absorbent. 1,3-Bis(3-aminopropy1)-1,1,3,3-tetramethyldsiloxane (GAP-0) rapidly transforms from a low viscosity liquid to a friable solid upon exposure to CO2 in simulated flue gas. This material has excellent thermal stability, low vapor pressure, high CO2 loading capability, and a large dynamic CO2 capacity between rich and lean solvent loadings. Preliminary plant and process models assembled from experimental data show a decrease in parasitic energy loss from 30% to 18% when compared to the benchmark monoethanolamine (MEA) process and a concomitant lowering of the cost of electricity (COE) from 74% to 44% increase versus a plant without carbon capture.

Perry, RJ↗