Engineering Papers⌕ Search

Engineering topics

Elsener, K.

Publications and source records attributed to Elsener, K..

Design, construction and commissioning of a technological prototype of a highly granular SiPM-on-tile scintillator-steel hadronic calorimeter

The CALICE collaboration is developing highly granular electromagnetic and hadronic calorimeters for detectors at future energy frontier electron-positron colliders. After successful tests of a physics prototype, a technological prototype of the Analog Hadron Calorimeter has been built, based on a design and construction techniques scalable to a collider detector. The prototype consists of a steel absorber structure and active layers of small scintillator tiles that are individually read out by directly coupled SiPMs. Each layer has an active area of 72 × 72 cm^2 and a tile size of 3 × 3 cm^2. With 38 active layers, the prototype has nearly 22,000 readout channels, and its total thickness amounts to 4.4 nuclear interaction lengths. The dedicated readout electronics provide time stamping of each hit with an expected resolution of about 1 ns. The prototype was constructed in 2017 and commissioned in beam tests at DESY. It recorded muons, hadron showers and electron showers at different energies in test beams at CERN in 2018. In this paper, the design of the prototype, its construction and commissioning are described. The methods used to calibrate the detector are detailed, and the performance achieved in terms of uniformity and stability is presented.

47 OTHER INSTRUMENTATION↗

FCC-ee interaction region backgrounds

The FCC-ee machine induced backgrounds on the two proposed detectors (CLD and IDEA) have been studied in detail. Synchrotron Radiation (SR) considerations dictate the Interaction Region (IR) optimization. An asymmetric IR design limits the final bend critical energy to 100 keV. Masks placed before the final focus quadrupole protect the detector from direct hits, and a shield placed around the beam pipe from secondary particles, keeping the effect of SR on the detector to negligible levels. The most important source of background is expected to be the Incoherent Pair Creation (IPC). Its effect has been studied in full simulation and reconstruction, and it was shown that it will not pose a problem for the detector, even if conservative estimations for the time resolution of the detector sensors are assumed. Moreover, the γγ → hadrons, radiative Bhabhas and beam-gas interaction induced backgrounds were studied. All were found to have small to negligible effect on the detector. Finally overall, the FCC–ee interaction region backgrounds are not expected to compromise the detector performance.

47 OTHER INSTRUMENTATION↗

Performance and Molière radius measurements using a compact prototype of LumiCal in an electron test beam

A new design of a detector plane of sub-millimetre thickness for an electromagnetic sampling calorimeter is presented. It is intended to be used in the luminometers LumiCal and BeamCal in future linear e \(^{+}\) e \(^{-}\) collider experiments. The detector planes were produced utilising novel connectivity scheme technologies. They were installed in a compact prototype of the calorimeter and tested at DESY with an electron beam of energy 1–5 GeV. The performance of a prototype of a compact LumiCal comprising eight detector planes was studied. The effective Molière radius at 5 GeV was determined to be (8.1 ± 0.1 (stat) ± 0.3 (syst)) mm, a value well reproduced by the Monte Carlo (MC) simulation (8.4 ± 0.1) mm. The dependence of the effective Molière radius on the electron energy in the range 1–5 GeV was also studied. Good agreement was obtained between data and MC simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Higgs physics at the CLIC electron–positron linear collider

The Compact Linear Collider (CLIC) is an option for a future \({\mathrm{e}^{+}}{\mathrm{e}^{-}} \) collider operating at centre-of-mass energies up to \(3\,\text {TeV} \) , providing sensitivity to a wide range of new physics phenomena and precision physics measurements at the energy frontier. This paper is the first comprehensive presentation of the Higgs physics reach of CLIC operating at three energy stages: \(\sqrt{s} = 350\,\text {GeV} \) , 1.4 and \(3\,\text {TeV} \) . The initial stage of operation allows the study of Higgs boson production in Higgsstrahlung ( \({\mathrm{e}^{+}}{\mathrm{e}^{-}} \rightarrow {\mathrm{Z}} {\mathrm{H}} \) ) and \({\mathrm{W}} {\mathrm{W}} \) -fusion ( \({\mathrm{e}^{+}}{\mathrm{e}^{-}} \rightarrow {\mathrm{H}} {{\nu }}_{\!\mathrm{e}} {\bar{{\nu }}}_{\!\mathrm{e}} \) ), resulting in precise measurements of the production cross sections, the Higgs total decay width \(\varGamma _{{\mathrm{H}}}\) , and model-independent determinations of the Higgs couplings. Operation at \(\sqrt{s} > 1\,\text {TeV} \) provides high-statistics samples of Higgs bosons produced through \({\mathrm{W}} {\mathrm{W}} \) -fusion, enabling tight constraints on the Higgs boson couplings. Studies of the rarer processes \({\mathrm{e}^{+}}{\mathrm{e}^{-}} \rightarrow \mathrm{t} {\bar{\mathrm{t}}} {\mathrm{H}} \) and \({\mathrm{e}^{+}}{\mathrm{e}^{-}} \rightarrow {\mathrm{H}} {\mathrm{H}} {{\nu }}_{\!\mathrm{e}} {\bar{{\nu }}}_{\!\mathrm{e}} \) allow measurements of the top Yukawa coupling and the Higgs boson self-coupling. This paper presents detailed studies of the precision achievable with Higgs measurements at CLIC and describes the interpretation of these measurements in a global fit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SiD Letter of Intent

This document presents the current status of the Silicon Detector (SiD) effort to develop an optimized design for an experiment at the International Linear Collider. It presents detailed discussions of each of SiD's various subsystems, an overview of the full GEANT4 description of SiD, the status of newly developed tracking and calorimeter reconstruction algorithms, studies of subsystem performance based on these tools, results of physics benchmarking analyses, an estimate of the cost of the detector, and an assessment of the detector R and D needed to provide the technical basis for an optimised SiD.

43 PARTICLE ACCELERATORS↗