Engineering Papers⌕ Search

Engineering topics

Elouadrhiri, Latifa

Publications and source records attributed to Elouadrhiri, Latifa.

At least 19 records

A.I. for nuclear physics

Nuclear science is concerned with the understanding of the nature of matter, its basic constituents and their interaction to form the elements and the properties we observe. This includes the forms of matter we see around us and also exotic forms such as those that existed in the first moments after the Big Bang and that exist today inside neutron stars. The techniques, tools, and expertise needed for nuclear physics (NP) research are therefore diverse in nature. State-of-the art accelerators are being developed to illuminate the dynamical basis of the core of the atom in terms of the fundamental constituents called quarks and gluons and to increase the number of isotopes with known properties. This scientific infrastructure is reaching scales and complexities that require computational methods for tasks such as anomaly detection in operational data. New methodologies are needed to detect anomalies and to optimize operating parameters, predict failures as well as to discover new optimization algorithms.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The CLAS12 High Threshold Cherenkov Counter

The High Threshold Cherenkov Counter (HTCC) is one of the detector systems of the CLAS12 spectrometer, and is used to generate a fast trigger signal in electron scattering experiments in the polar angle range from 5°to 35°. The HTCC is installed in front of the drift chambers and introduces a minimal amount of additional material within the acceptance. The HTCC is one unit whose core component is a multifocal mirror that consists of 60 lightweight ellipsoidal mirrors. It is important that the HTCC provides efficient coverage of the CLAS12 forward acceptance with no gaps. In order to achieve this, each sector of the CLAS12 Forward Detector is covered by 2 identical half-sector mirrors that focus Cherenkov light on 8 phototubes. The HTCC has a total of 48 channels with Electron Tubes 9823QKB photomultipliers that have a 5-in quartz face plate to detect Cherenkov light. The system provides rejection of charged -mesons with momenta below 4.8 GeV for the reliable identification of scattered electrons. In this paper the details of the design, construction, calibration, and performance results of the HTCC are presented

Sharabian, Y. G.↗

Nucleon Tomography Studies at Jefferson Lab

Protons and neutrons, are the building blocks of atomic nuclei. They constitute over 99 percent of the mass of the matter in the visible universe. A fundamental challenge of modern nuclear physics is to understand the structure of these constituents. The 12 GeV Upgrade of the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab and the construction of state-of-the-art detector systems make it a unique facility in the world to address this challenge. Electron scattering is a superb experimental tool to study the internal structure of nucleons at differing distance scales, as the resolving power of the probe can be varied. The CEBAF Upgrade was completed in September 2017 and the new generation of experiments has started. These experiments will enable a collaboration of scientists from around the world to perform precise experiments of exclusive processes covering a large range in kinematics to effectively engage in nuclear imaging, revealing hidden aspects of its internal structure, and providing insight into quark confinement forces in the nucleon, one of the greatest mysteries of modern physics. The Generalized Parton Distributions (GPDs) provide the theoretical framework to interpret the experimental data in terms of 3-dimensional imaging. In addition, recent development demonstrated that the GPD formalism enables access to the nucleon's Gravitational Form Factors that encode its mechanical properties. We will focus on the study of the Deeply Virtual Compton Scattering (DVCS), the most effective way to access GPDs. We will review the landscape of both theory and experiment, and discuss the latest results from Jefferson Lab at 6 GeV in comparison with results from other facilities, and present a first look at the new experiments with the 12 GeV Upgrade.

Elouadrhiri, Latifa↗

Overview of torus magnet coil production at Fermilab for the Jefferson Lab 12-GeV Hall B upgrade

Fermi National Accelerator Laboratory (Fermilab) fabricated the torus magnet coils for the 12 GeV Hall B upgrade at Jefferson Laboratory (JLab). The production consisted of 6 large superconducting coils for the magnet and 2 spare coils. The toroidal field coils are approximately 2 m x 4 m x 5 cm thick. Each of these coils consists of two layers, each of which has 117 turns of copper-stabilized superconducting cable which will be conduction cooled by helium gas. Due to the size of the coils and their unique geometry, Fermilab designed and fabricated specialized tooling and, together with JLab, developed unique manufacturing techniques for each stage of the coil construction. In conclusion, this paper describes the tooling and manufacturing techniques required to produce the six production coils and two spare coils needed by the project.

43 PARTICLE ACCELERATORS↗

New results from the studies of the Ν (1440) 1/2 + , Ν (1520) 3/2 – , and Δ (1620) 1/2 – resonances in exclusive ep → e'p'π + π – electroproduction with the CLAS detector

In this study, the transition helicity amplitudes from the proton ground state to the N(1440)1/2 + , N(1520)3/2 – , and Δ(1620)1/2 – resonances (γvpN* electrocouplings) were determined from the analysis of nine independent onefold differential π + π – p electroproduction cross sections off a proton target, taken with CLAS at photon virtualities 0.5GeV 2 < Q 2 < 1.5 GeV 2 . The phenomenological reaction model employed for separation of the resonant and nonresonant contributions to this exclusive channel was further developed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The CLAS12 Torus Detector Magnet at Jefferson Laboratory

The CLAS12 Torus is a toroidal superconducting magnet, which is part of the detector for the 12-GeV accelerator upgrade at Jefferson Laboratory (JLab). The coils were wound/fabricated by Fermilab, with JLab responsible for all other parts of the project scope, including design, integration, cryostating the individual coils, installation, cryogenics, I&C, etc. This paper provides an overview of the CLAS12 Torus magnet features and serves as a status report of its installation in the experimental hall. Completion and commissioning of the magnet is expected in 2016.

43 PARTICLE ACCELERATORS↗

Structural Analysis of Thermal Shields During a Quench of a Torus Magnet for the 12 GeV Upgrade

A toroidal magnet system consisting of six superconducting coils is being built for the Jefferson Lab 12- GeV accelerator upgrade project. This paper details the analysis of eddy current effects during a quench event on the aluminum thermal shield. The shield has been analyzed for mechanical stresses induced as a result of a coil quench as well as a fast discharge of the complete magnet system. The shield has been designed to reduce the eddy current effects and result in stresses within allowable limits.

43 PARTICLE ACCELERATORS↗

FMEA on the superconducting torus for the Jefferson Lab 12 GeV accelerator upgrade

As part of the Jefferson Lab 12GeV accelerator upgrade project, Hall B requires two conduction cooled superconducting magnets. One is a magnet system consisting of six superconducting trapezoidal racetrack-type coils assembled in a toroidal configuration and the second is an actively shielded solenoidal magnet system consisting of 5 coils. Both magnets are to be wound with Superconducting Super Collider-36 NbTi strand Rutherford cable soldered into a copper channel. This paper describes the various failure modes in torus magnet along with the failure modes that could be experienced by the torus and its interaction with the solenoid which is located in close proximity.

43 PARTICLE ACCELERATORS↗

Jefferson Lab CLAS12 Superconducting Solenoid magnet Requirements and Design Evolution

As part of the Jefferson Lab 12GeV accelerator upgrade project, one of the experimental halls (Hall B) requires two superconducting magnets. One is a magnet system consisting of six superconducting trapezoidal racetrack-type coils assembled in a toroidal configuration and the second is an actively shielded solenoidal magnet system consisting of 5 coils. In this presentation the physics requirements for the 5 T solenoid magnet, design constraints, conductor decision, and cooling choice will be discussed. The various design iterations to meet the specification will also be discussed in this presentation.

Rajput-Ghoshal, Renuka↗

12 GeV Upgrade and the study of 3D imaging of nucleon

The 12 GeV upgrade of Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab will enable a new experimental program with substantial discovery potential in hadronic and nuclear physics. One of the flagship science programs is the study of multidimensional images of hadrons. A broad experimental program has been developed to map the nucleon's intrinsic correlated spin and momentum distribution through measurement of deeply exclusive and semi- inclusive processes. These multidimensional distributions open a new window on the elusive spin content of the nucleon through observables that are directly related to the orbital angular momentum of quarks and gluons. An overview of the 12 GeV upgrade with focus on the study of the multidimensional imaging of hadrons with the CLAS12 detector will be presented.

Elouadrhiri, Latifa↗