Engineering topics

Elliott, David G.

Publications and source records attributed to Elliott, David G..

5 records

NASA NTRS1991

Electromagnetic Gun With Commutated Coils

Proposed electromagnetic gun includes electromagnet coil, turns of which commutated in sequence along barrel. Electrical current fed to two armatures by brushes sliding on bus bars in barrel. Interaction between armature currents and magnetic field from coil produces force accelerating armature, which in turn, pushes on projectile. Commutation scheme chosen so magnetic field approximately coincides and moves with cylindrical region defined by armatures. Scheme has disadvantage of complexity, but in return, enables designer to increase driving magnetic field without increasing armature current. Attainable muzzle velocity increased substantially.

Elliott, David G.↗

NASA NTRS1991

Traveling-wave synchronous coil gun

An outline is presented of the coilgun concept, excitation, switching, brush commutation, power supply, and performance. It is shown that a traveling-wave synchronous coilgun permits independent adjustment of the magnetic field and armature current for high velocity at low armature mass fraction. Magnetic field energy is transferred from the rear of the wave to the front without passing through the power supply. Elaborate switching is required.

Elliott, David G.↗

NASA NTRS1991

SIRTF stray light analysis

The Space Infrared Telescope Facility (SIRTF) is a 1-meter cryogenic infrared telescope. Stray light is kept below the natural background by restrictions on sun, Earth, and moon off-axis angles; by conservative baffle design; by the use of advanced diffuse black coatings; and by superfluid helium cooling. The aperture stop is located at the primary mirror rather than at the secondary mirror to increase the aperture and reduce the central obscuration. Stray light from off-axis sources is greater with the aperture stop at the primary than with the aperture stop at the secondary, but the modulation of the signal produced by tilting of the secondary mirror for chopping is less. Stray light from telescope thermal emission is lower with the aperture stop at the primary.

Elliott, David G.↗

NASA NTRS1989

Traveling-wave induction launchers

An analysis of traveling-wave induction launchers shows that induction is a feasible method of producing armature current and that efficient accelerators can be built without sliding contacts or arcs. In a traveling-wave induction launcher the armature current is induced by a slip speed between the armature and a traveling magnetic field. At 9 m/s slip speed a 9 kg projectile with an aluminum armature weighing 25 percent of the total mass can be accelerated to 3000 m/s in a 5 m-long barrel with a total ohmic loss in the barrel coils and armature of 4 percent of the launch kinetic energy and with an average armature temperature rise of 220 deg C, but a peak excitation frequency of 8600 Hz is required. With a 2 kg launch mass the ohmic loss is 7 percent. A launcher system optimized for rotating generators would have a peak frequency of 4850 Hz; with an aluminum armature weighing 33 percent of the launch mass and a slip speed of 30 m/s the total ohmic loss in the generators, cables, and accelerator would be 43 percent of the launch kinetic energy, and the average armature temperature rise would be 510 deg C.

Elliott, David G.↗

NASA NTRS1989

Mesh-matrix analysis method for electromagnetic launchers

The mesh-matrix method is a procedure for calculating the current distribution in the conductors of electromagnetic launchers with coil or flat-plate geometry. Once the current distribution is known the launcher performance can be calculated. The method divides the conductors into parallel current paths, or meshes, and finds the current in each mesh by matrix inversion. The author presents procedures for writing equations for the current and voltage relations for a few meshes to serve as a pattern for writing the computer code. An available subroutine package provides routines for field and flux coefficients and equation solution.

Elliott, David G.↗