Engineering Papers⌕ Search

Engineering topics

Einaudi, Franco

Publications and source records attributed to Einaudi, Franco.

At least 127 records · Page 7

Temperature Humidity and Sea Level Pressure Increments Induced by 1DVAR Analysis of GPS Refractivity

The Global Positioning System (GPS) transmitted signals are affected by the atmosphere. Using the radio occultation technique, where a receiver is placed on a low-Earth-orbiting platform. it is possible to perform soundings. by measuring the bending angles of the rays. The information can be converted into atmospheric refractivity. We have developed a one dimensional variational (1DVAR) analysis that uses GPS/MET 1995 refractivity and 6-hour FVDAS (Finite Volume Data Assimilation System) forecasts as background information to constrain the retrievals. The analysis increments are defined as 1DVAR minus background temperature, humidity and sea level pressure. Before assimilating the 1DVAR profiles into the FVDAS. the increments need to be understood. First, some bias could be induced in the retrievals when confronted with actual biased data: second. bias in the back-round could create undesired bias in the retrievals. Anv bias in the analyses will ultimately change the climatology of the model the retrievals will be assimilated into. We relate the increments to the reduction of the difference between observed minus computed refractivity profiles. We also point out the difference in the mean increments using backgrounds which have assimilated either NESDIS TIROS Operational Vertical Sounder (TOVS) operational retrievals or Data Assimilation Office (DAO) TOVS interactive retrievals. The climatology of the model in terms of refractivity is significantly different and this impacts the GPS 1DVAR increments. This testifies that changing the basic load of assimilated data has an influence on the impact the GPS data may have in a DAS.

Poli, Paul↗

Interferometric Characterization of the Earth's Atmosphere from Lagrange Point 2

Part of the NASA plans for future Earth-Science missions calls for observations using novel vantage points that can produce science products otherwise unobtainable. Observations of the Earth from the Lagrange-2 point, L-2, (1.5 million kilometers behind the Earth on the Earth-Sun line) affords a unique vantage point for atmospheric science. Special observation of the Earth's atmosphere using solar occultation techniques in the near infrared (1 to 4 microns) provides one of the most accurate method of passively sensing altitude profiles of the major species (CO2, O3, O2, CH4, H2O, N2O). In addition to observation of the Earth's atmosphere, it will be possible to observe a portion of the solar disk at moderate spatial resolution without interference from the Earth.

Herman, J. R.↗

Cloud Structure and Cloud-Radiation Interaction: From Smallest Observable Scales (Less than 10 m) to GCM Grid Scales (More than 100 km)

In this presentation we review the fractal nature of internal cloud structure from cm- to km-scales as captured by in-situ probes during long horizontal penetrations by aircraft. We uncover the non-Poissonian spatial distribution of cloud droplets at submeter scales and confirm scale-invariant behavior for large scales. Based on these structural characteristics, we generate simple fractal cloud models that reproduce statistical scaling properties of real clouds. These stochastic models represent a link between nonlinear science, in general, and cloud-radiation interaction, in particular. Next we run three-dimensional radiative transfer computations on these synthetic fractal clouds and compare the structure of the resulting radiation fields with the known structure of the cloud model and with satellite images of real clouds. The different behaviors observed for small and large-scale variabilities will be discussed in detail. We find that while the large-scale fluctuations of the resulting radiation fields resemble those in the original scale-invariant cloud structure, the radiation at small scales is much smoother than its cloud liquid water counterpart. This violates scale-invariance and produces a scale-break at 0.2-0.5 km that is clearly observed in high-resolution satellite data such as from Landsat. Finally, we show how radiative transfer Green function theory in the photon diffusion limit explains (and predicts) the above phenomena of "radiative smoothing."

Marshak, Alexander↗

Cloud Slicing: A New Technique to Derive Upper Tropospheric Ozone from Satellite Measurements

A new technique denoted cloud slicing has been developed for measuring upper tropospheric ozone. Cloud slicing takes advantage of the opaque property of water vapor clouds to ultraviolet wavelength radiation. Measurements of above-cloud column ozone from the Nimbus 7 total ozone mapping spectrometer (TOMS) instrument are combined together with Nimbus 7 temperature humidity and infrared radiometer (THIR) cloud-top pressure data to derive ozone column amounts in the upper troposphere. In this study tropical TOMS and THIR data for the period 1979-1984 are analyzed. By combining total tropospheric column ozone (denoted TCO) measurements from the convective cloud differential (CCD) method with 100-400 hPa upper tropospheric column ozone amounts from cloud slicing, it is possible to estimate 400-1000 hPa lower tropospheric column ozone and evaluate its spatial and temporal variability. Results for both the upper and lower tropical troposphere show a year-round zonal wave number 1 pattern in column ozone with largest amounts in the Atlantic region (up to 15 DU in the 100-400 hPa pressure band and around 25-30 DU in the 400-1000 hPa pressure band). Upper tropospheric ozone derived from cloud slicing shows maximum column amounts in the Atlantic region in the June-August and September-November seasons which is similar to the seasonal variability of CCD derived TCO in the region. For the lower troposphere, largest column amounts occur in the September-November season over Brazil in South America and also southern Africa. Localized increases in the tropics in lower tropospheric ozone are found over the northern region of South America around August and off the west coast of equatorial Africa in the March-May season. Time series analysis for several regions in South America and Africa show an anomalous increase in ozone in the lower troposphere around the month of March which is not observed in the upper troposphere. The eastern Pacific indicates weak seasonal variability of upper, lower, and total tropospheric ozone compared to the western Pacific which shows largest TCO amounts in both hemispheres around spring months. Ozone variability in the western Pacific is expected to have greater variability caused by strong convection, pollution and biomass burning, land/sea contrast and monsoon developments.

Ziemke, J. R.↗

An Overview of Modeling Middle Atmospheric Odd Nitrogen

Odd nitrogen (N, NO, NO2, NO3, N2O5, HNO3, HO2NO2, ClONO2, and BrONO2) constituents are important components in the control of middle atmospheric ozone. Several processes lead to the production of odd nitrogen (NO(sub y)) in the middle atmosphere (stratosphere and mesosphere) including the oxidation of nitrous oxide (N2O), lightning, downflux from the thermosphere, and energetic charged particles (e.g., galactic cosmic rays, solar proton events, and energetic electron precipitation). The dominant production mechanism of NO(sub y) in the stratosphere is N2O oxidation, although other processes contribute. Mesospheric NO(sub y) is influenced by N2O oxidation, downflux from the thermosphere, and energetic charged particles. NO(sub y) is destroyed in the middle atmosphere primarily via two processes: 1) dissociation of NO to form N and O followed by N + NO yielding N2 + O to reform even nitrogen; and 2) transport to the troposphere where HNO3 can be rapidly scavenged in water droplets and rained out of the atmosphere. There are fairly significant differences among global models that predict NO(sub y). NO(sub y) has a fairly long lifetime in the stratosphere (months to years), thus disparate transport in the models probably contributes to many of these differences. Satellite and aircraft measurement provide modeling tests of the various components of NO(sub y). Although some recent reaction rate measurements have led to improvements in model/measurement agreement, significant differences do remain. This presentation will provide an overview of several proposed sources and sinks of NO(sub y) and their regions of importance. Multi-dimensional modeling results for NO(sub y) and its components with comparisons to observations will also be presented.

Jackman, Charles H.↗

Optimizing Orbit-Instrument Configuration for Global Precipitation Mission (GPM) Satellite Fleet

Following the scientific success of the Tropical Rainfall Measuring Mission (TRMM) spearheaded by a group of NASA and NASDA scientists, their external scientific collaborators, and additional investigators within the European Union's TRMM Research Program (EUROTRMM), there has been substantial progress towards the development of a new internationally organized, global scale, and satellite-based precipitation measuring mission. The highlights of this newly developing mission are a greatly expanded scope of measuring capability and a more diversified set of science objectives. The mission is called the Global Precipitation Mission (GPM). Notionally, GPM will be a constellation-type mission involving a fleet of nine satellites. In this fleet, one member is referred to as the "core" spacecraft flown in an approximately 70 degree inclined non-sun-synchronous orbit, somewhat similar to TRMM in that it carries both a multi-channel polarized passive microwave radiometer (PMW) and a radar system, but in this case it will be a dual frequency Ku-Ka band radar system enabling explicit measurements of microphysical DSD properties. The remainder of fleet members are eight orbit-synchronized, sun-synchronous "constellation" spacecraft each carrying some type of multi-channel PMW radiometer, enabling no worse than 3-hour diurnal sampling over the entire globe. In this configuration the "core" spacecraft serves as a high quality reference platform for training and calibrating the PMW rain retrieval algorithms used with the "constellation" radiometers. Within NASA, GPM has advanced to the pre-formulation phase which has enabled the initiation of a set of science and technology studies which will help lead to the final mission design some time in the 2003 period. This presentation first provides an overview of the notional GPM program and mission design, including its organizational and programmatic concepts, scientific agenda, expected instrument package, and basic flight architecture. Following this introduction, we focus specifically on the last topic, that being an analysis which leads to an optimal flight architecture dictated in part by science requirements but constrained by allowable orbital mechanics, instrument scan patterns, and antenna aperture properties. Because the optimal architecture involves an interplay between orbit mechanics and instrument specifications, it is important to recognize that in attempting to serve various scientific themes, the final optimal architecture will represent a compromise concerning dynamic range, spatial resolution, sampling interval, pointing, beam coincidence, and measurement uncertainty. Moreover, cost becomes a major factor in seeking the optimal architecture through the pathways of antenna and instrument scan designs, as well as propulsion requirements associated with the orbit heights of various "constellation" members. Although the results presented at the IGARSS-2001 meeting will likely not be the fully refined flight architecture specifications, they are expected to be nearly complete.

Smith, Eric A.↗

Evaluation of Stratospheric Transport in New 3D Models Using the Global Modeling Initiative Grading Criteria

The Global Modeling Initiative (GMI) Team developed objective criteria for model evaluation in order to identify the best representation of the stratosphere. This work created a method to quantitatively and objectively discriminate between different models. In the original GMI study, 3 different meteorological data sets were used to run an offline chemistry and transport model (CTM). Observationally-based grading criteria were derived and applied to these simulations and various aspects of stratospheric transport were evaluated; grades were assigned. Here we report on the application of the GMI evaluation criteria to CTM simulations integrated with a new assimilated wind data set and a new general circulation model (GCM) wind data set. The Finite Volume Community Climate Model (FV-CCM) is a new GCM developed at Goddard which uses the NCAR CCM physics and the Lin and Rood advection scheme. The FV-Data Assimilation System (FV-DAS) is a new data assimilation system which uses the FV-CCM as its core model. One year CTM simulations of 2.5 degrees longitude by 2 degrees latitude resolution were run for each wind data set. We present the evaluation of temperature and annual transport cycles in the lower and middle stratosphere in the two new CTM simulations. We include an evaluation of high latitude transport which was not part of the original GMI criteria. Grades for the new simulations will be compared with those assigned during the original GMT evaluations and areas of improvement will be identified.

Strahan, Susan E.↗

Stratospheric Age Spectra and Mean Ages From In Situ Observations of Carbon Dioxide

Tropospheric CO2 mixing ratios exhibit latitudinally varying seasonal and interannual oscillations superimposed on the long-term positive trend due to fossil fuel combustion. In situ observations of CO2 obtained from 1992-2000 using the NASA ER-2 aircraft and high-altitude balloons show that these time-varying signals propagate into the stratosphere, providing information about the transport history of sampled air. We have used these data to derive age spectra and mean ages that can be compared with results from models of the stratospheric circulation. Age spectra have been derived for altitudes below approximately 20 km for the tropics and for northern midlatitudes, where there is sufficient data and where the amplitudes of the seasonal and interannual oscillations are large enough to be detected. The midlatitude CO2 data are consistent with bimodal age spectra, which may result from a subtropical "barrier" to horizontal exchange. Seasonally resolved mean ages are available with nearly pole-to-pole coverage below 20 km and in the tropics and at middle and high northern latitudes up to the maximum altitude reached by the balloons (approximately 30 km). The oldest air sampled was in the Arctic polar vortex with a mean age of 6.5 +/- 0.5 years.

Andrews, Arlyn E.↗

The Aqua-Aura Train

This talk will focus on the afternoon constellation of EOS platforms and the scientific benefits that arise from this formation. The afternoon EOS constellation or the "A-train" will provide unprecedented information on clouds and aerosols. At 1:30 PM crossing time EOS-Aqua begins the train with the MODIS, CERES and AIRS instruments making aerosol, cloud, radiation budget , temperature and water vapor measurements. AMSR-E will also make total column water measurements. Following Aqua by one minute, Cloudsat will make active radar precipitation measurements as and PICASSOCENA will make lidar measurements of clouds and aerosols. Fourteen minutes later, EOS-Aura will pass through the same space making upper troposphere water vapor and ice profiles as well as some key trace gases associated with convective processes (MLS and HIRDLS). Additional measurements of aerosols will be made by Aura's OMI instrument.

Schoeberl, Mark↗

The EOS Aura Mission

The EOS Aura Mission is designed to make comprehensive chemical measurements of the troposphere and stratosphere. In addition the mission will make measurements of important climate variables such as aerosols, and upper tropospheric water vapor and ozone. Aura will launch in late 2003 and will fly 15 minutes behind EOS Aqua in a polar sun synchronous ascending node orbit with a 1:30 pm equator crossing time.

Schoeberl, Mark R.↗

Large Aperture Scanning Lidar Based on Holographic Optical Elements

Lidar remote sensing instruments can make a significant contribution to satisfying many of the required measurements of atmospheric and surface parameters for future spaceborne platforms, including topographic altimeters, atmospheric profiles of, wind, humidity, temperature, trace molecules, aerosols, and clouds. It is highly desirable to have wide measurement swaths for rapid coverage rather than just the narrow ribbon of data that is obtained with a nadir only observation. For most applications global coverage is required, and for wind measurements scanning or pointing is required in order to retrieve the full 3-D wind vector from multiple line-of-sight Doppler measurements. Conventional lidar receivers make up a substantial portion of the instrument's size and weight. Wide angle scanning typically requires a large scanning mirror in front of the receiver telescope, or pointing the entire telescope and aft optics assembly, Either of these methods entails the use of large bearings, motors, gearing and their associated electronics. Spaceborne instruments also need reaction wheels to counter the torque applied to the spacecraft by these motions. NASA has developed simplified conical scanning telescopes using Holographic Optical Elements (HOEs) to reduce the size, mass, angular momentum, and cost of scanning lidar systems. NASA has developed two operating lidar systems based on 40 cm diameter HOEs. The first such system, named Prototype Holographic Atmospheric Scanner for Environmental Remote Sensing (PHASERS) was a joint development between NASA Goddard Space Flight Center (GSFC) and the University of Maryland College Park. PHASERS is based on a reflection HOE for use at the doubled Nd:YAG laser wavelength of 532 nm and has recently undergone a number of design changes in a collaborative effort between GSFC and Saint Anselm College in New Hampshire. The next step was to develop IR transmission HOEs for use with the Nd:YAG fundamental in the Holographic Airborne Rotating Lidar Instrument Experiment (HARLIE). The HOE spins like a compact disk in a large ring ball bearing. In an aircraft the HOE faces down, looking out through a window at an angle of 45 degrees off-nadir. The HOE diffracts 85% of the incident 532 nm light into a 160 micron spot at a focal length of 1 meter. HARLIE is a field deployable lidar measuring aerosol, cloud, and boundary layer backscatter for atmospheric research. It has flown several times and is also used from a ground-based trailer in an upward-looking mode. The HOE generates a 45 degree conical scan pattern by rotating at speeds up to 30 rpm. Like PHASERS, the HOE in HARLIE serves both as the laser collimating lens as well as the receiver telescope primary optic. The telescope is coupled to the receiver package via fiber optic. The transmitter is a diode pumped Nd:YAG laser operating at 1064 nm, delivering 1 mJ pulses at a 5 KHz rep-rate. The receiver has a 200 microradian field-of-view and a 0.5 nm optical bandpass. The photon counting data system utilizes a single Geiger-mode silicon avalanche photodiode detector, This new technology has also presented us with new data visualization challenges as well as new measurement techniques. The backscatter data obtained from a stationary (i.e. ground-based) scanning HOE lidar is on the surface of a cone, which when viewed over many consecutive scans can reveal atmospheric motions on this surface over time as the atmosphere advects over the site. In a moving platform such as an airplane or satellite, the data from consecutive scans cover different areas under the flight path, revealing atmospheric structure in 3-dimensions. An example of a visualization of HARLIE ground-based data is presented, showing aerosol backscatter on a 90 degree conical surface generated from one 360 degree scan of the lidar during the HOLO-1 field campaign on the afternoon of 10 March 1999. Higher backscatter levels are rendered as lighter signal against a dark background. Breaking Kelvin-Helmholtz waves are evident on the north side of the scan at an altitude of 10-11 km. Time series of successive scans made at regular intervals render unique views of atmospheric motions, from which vertical profiles of atmospheric wind vectors can be obtained using a unique data analysis approach. Wind vectors obtained from the lidar were compared with co-located radiosonde wind profiles during an intensive operating period in September-October 2000 at the Atmospheric Radiation Measurement Program's Southern Great Plains Central Facility.

Schwemmer, Geary K.↗

Use of Remotely-Sensed Rainfall Data in Global Modeling and Data Assimilation

Precipitation observations derived from microwave sensors available from the Tropical Rainfall Measuring Mission (TRMM) and the proposed Global Precipitation Mission (GPM) can provide crucial information needed for improving global modeling, data assimilation, and numerical weather prediction. New methodologies are being developed at NASA to make effective use of this new data type in these applications. Currently, global analyses contain significant errors in primary hydrological fields such as precipitation and evaporation, especially in the tropics. We show that assimilating 6-h averaged TRMM rainfall retrievals improves not only the hydrological cycle but also key climate parameters such as clouds, radiation, and the upper tropospheric moisture in the analysis produced by the Goddard Earth Observing System (GEOS) Data Assimilation System. The improved analysis also leads to improved short-range forecasts in the tropics. The above results were obtained using a variational assimilation procedure that uses rainfall observations to derive moisture and temperature tendency corrections every 6 hours to compensate for errors arising from imperfect initial conditions and deficiencies in the model physics. We will describe a developmental path towards using space-borne rainfall data to empirically estimate and correct for state-dependent systematic errors in parameterized model physics. The study provides a demonstration of the potential of using remote-sensed rainfall data from microwave instruments to improve the 4-dimensional global datasets for climate analysis and numerical weather prediction.

Hou, Arthur↗

Advances in Direct Detection Doppler Lidar Technology and Techniques

In this paper we will describe the ground based Doppler lidar system which is mounted in a modified delivery van to allow field deployment and operations. The system includes an aerosol double edge receiver optimized for aerosol backscatter Doppler measurements at 1064 nm and a molecular double edge receiver which operates at 355 nm. The lidar system will be described including details of the injection seeded diode pumped laser transmitter and the piezoelectrically tunable high spectral resolution Fabry Perot etalon which is used to measure the Doppler shift. Examples of tropospheric wind profiles obtained with the system will also be presented to demonstrate its capabilities.

Gentry, Bruce↗

Validation of MODIS Aerosol Retrieval Over Ocean

The MODerate resolution Imaging Spectroradiometer (MODIS) algorithm for determining aerosol characteristics over ocean is performing with remarkable accuracy. A two-month data set of MODIS retrievals co-located with observations from the AErosol RObotic NETwork (AERONET) ground-based sunphotometer network provides the necessary validation. Spectral radiation measured by MODIS (in the range 550 - 2100 nm) is used to retrieve the aerosol optical thickness, effective particle radius and ratio between the submicron and micron size particles. MODIS-retrieved aerosol optical thickness at 660 nm and 870 nm fall within the expected uncertainty, with the ensemble average at 660 nm differing by only 2% from the AERONET observations and having virtually no offset. MODIS retrievals of aerosol effective radius agree with AERONET retrievals to within +/- 0.10 micrometers, while MODIS-derived ratios between large and small mode aerosol show definite correlation with ratios derived from AERONET data.

Remer, Lorraine A.↗

Overview and Scientific Agenda of Global Precipitation Mission

This paper addresses the status of the Global Precipitation Mission (GPM) currently planned for launch in the 2007-2008 time frame. The GPM notional design involves a 9-member satellite constellation, one of which wilt be an advanced TRMM-like "core" satellite carrying a dual-frequency Ku-Ka band radar (DFPR) and a TMI-like radiometer. The other eight members of the constellation will be considered daughters of the core satellite, each carrying some type of passive microwave radiometer measuring across the 10.7 - 85 GHz ,frequency range - likely to include a combination of lightweight satellites and co-existing operational/Experimental satellites carrying passive microwave radiometers (i.e., SSM/I and AMSR-E & -F). The constellation is designed to provide no worse than 3-hour sampling at any spot on the globe using sun-synchronous orbit architecture for the daughter satellites, with the core satellite providing relevant measurements on internal cloud-precipitation microphysical processes and the "training-calibrating" information for retrieval algorithms used on daughter satellite measurements. The GPM is organized internationally, currently involving a partnership between NASA in the US, NASDA in Japan, and ESA in Europe (representing the European community nations). The mission is expected to involve additional international participants, sister agencies to the mainstream space agencies, and a diverse collection scientists from academia, government, and the private sector, A critical element in understanding the scientific thinking which has motivated the GPM project is an understanding of what scientific problems TRMM has and has not been able to address and at what scales. The TRMM satellite broke important scientific ground because it carried to space an array of rain-sensitive instruments, two of which were specifically designed for physical precipitation retrieval. These were the 9-channel TRMM Microwave Imager (TMI) and the 13.8 GHz Precipitation Radar (PR). By the same token, because TRMM is a single satellite in a low inclination, low altitude, non-sun-synchronous orbit, it cannot provide global coverage or regular diurnal sampling. These features are essential for many current scientific inquiries involving physical processes of climate and the global water cycle, the modeling of hydrometeorological-biogeochemical cycling, and coupled land-atmosphere/ocean-atmosphere exchanges. Moreover, TRMM has not been able to retrieve explicit properties of the drop size distribution (DSD), a final major barrier to making accurate rain measurements, because the single frequency TRMM radar cannot measure differential reflectivity. which is a minimal requirement for attacking rain retrieval within the framework of extinction cross-section-dependency. GPM is expected to surmount much of the DSD retrieval problem because its core satellite wilt have the capacity to make differential reflectivity measurements with its Ku-Ka band radar (13.6 - 35 GHz) called DFPR - being developed by NASDA/CRL in Japan. This paper will provide an overview of the above issues as well as present a discussion on the expected measurement improvements.

Smith, Eric A.↗

Three Dimensional Atmospheric Radiative Transfer-Applications and Methods Comparison

We review applications of 3D radiative transfer in the atmosphere, emphasizing the wide spectrum of scales important to remote sensing and modeling of cloud fields, and the characteristic scales introduced into observed radiances and fluxes by the distribution of photon pathlengths at conservative and absorbing wavelengths. We define the "plane-parallel bias", which is a measure of the importance of 3D cloud structure in large-scale models, and the "independent pixel errors" that quantify the significance of 3D effects in remote sensing, and emphasize their relative magnitude and scale dependence. A variety of approaches in current use in 3D radiative transfer, and issues of speed, accuracy, and flexibility are summarized. We also describe a recently initiated "International Intercomparison of 3-Dimensional Radiation Codes", or I3RC. I3RC is a 3-phase effort that has as its goals to: (1) understand the errors and limits of 3D methods; (2) provide "baseline" cases for future 3D code development; (3) promote sharing of 3D tools; (4) derive guidelines for 3D tool selection; and (5) improve atmospheric science education in 3D radiative transfer. Selected results from Phases 1 and 2 of I3RC are discussed. These are taken from five cloud fields: a 1D field of bar clouds, a 2D radar-derived field, a 3D Landsat-derived field, a stratiform cloud from the model of C. Moeng, and a convective cloud from the model of B. Stevens. Computations have been carried out for three monochromatic wavelengths (one conservative, one absorptive, and one thermal) and two solar zenith angles (0, 60 degrees).

Cahalan, Robert F.↗

"Cloud Slicing": A New Technique to Derive Upper Tropospheric Ozone from Satellite Measurements

A new technique called "cloud slicing" is introduced in this study to determine tropospheric ozone profile information. This method is unique because all previous methods incorporating satellite data were only capable of estimating the total column of ozone in the troposphere. Cloud slicing takes advantage of the opaque property of water vapor clouds to ultraviolet wavelength radiation. Measurements of above-cloud column ozone from the Nimbus 7 total ozone mapping spectrometer (TOMS) instrument are combined together with Nimbus 7 temperature humidity and infrared radiometer (THIR) cloud-top pressure data to derive ozone column amounts in the upper troposphere. In this study, tropical TOMS and THIR data for the period 1979-1984 are analyzed. Our investigation examines several case studies and illustrates the robust nature of this new technique for future satellite missions.

Chandra, Sushil↗

Latent Heating Retrievals Using the TRMM Precipitation Radar: A Multi-Seasonal Study

Rainfall is a key link in the hydrologic cycle and is a primary heat source for the atmosphere. The vertical distribution of latent heat release, which is accompanied by rainfall, modulates the large-scale circulations of the tropics and in turn can impact midlatitude weather. This latent heat release is a consequence of phase changes between vapor, liquid, and solid water. Present largescale weather and climate models can simulate latent heat release only crudely, thus reducing their confidence in predictions on both global and regional scales. This paper represents the first attempt to use NASA Tropical Rainfall Measuring Mission (TRMM) rainfall information to estimate the four-dimensional structure of global monthly latent heating profiles over the global tropics from December 1997 to October 2000. The Goddard Convective-Stratiform. Heating (CSH) algorithm and TRMM precipitation radar data are used for this study. We will examine and compare the latent heating structures between 1997-1998 (winter) ENSO and 1998-2000 (non-ENSO). We will also examine over the tropics. The seasonal variation of heating over various geographic locations (i.e., oceanic vs continental; Indian oceans vs west Pacific; Africa vs S. America) will be also examined and compared. In addition, we will examine the relationship between latent heating (max heating level) and SST. The period of interest also coincides with several TRMM field campaigns that recently occurred over the South China Sea in 1998 (SCSMEX), Brazil in 1999 (TRMM-LBA), and in the central Pacific in 1999 (KWAJEX). Sounding diagnosed Q1 budgets from these experiments could provide a means of validating the retrieved profiles of latent heating from the CSH algorithm.

Tao, Wei-Kuo↗