Engineering Papers⌕ Search

Engineering topics

Dykes, Katherine L.

Publications and source records attributed to Dykes, Katherine L..

NREL's Balance-of-System Cost Model for Land-Based Wind

NREL's Land-based Balance of System Systems Engineering (LandBOSSE) model is a tool for modeling the balance of system (BOS) costs of land-based wind plants. BOS costs currently account for approximately 30% of the capital expenditures needed to install a land-based wind plant and include all costs associated with installing a wind plant, such as permitting, labor, material, and equipment costs associated with site preparation, foundation construction, electrical infrastructure, and tower installation. NREL developed LandBOSSE after identifying a need for a hybrid of process-based and empirically derived model that can provide flexibility for assessing wind plant BOS costs at a system level. NREL's prior BOS models have relied on empirical fits of legacy industry data, which limit their predictive ability. LandBOSSE, however, was designed to help users explore tradeoffs between innovative design scenarios while balancing the level of detail and speed required for model execution. The model was developed using a hybrid of process-based and empirically derived methods to create a modular model design that will allow for updates as wind energy technology evolves. The goal of LandBOSSE is to allow researchers, analysts, wind power developers, government agencies, and the public to explore how BOS may vary for different wind plant designs.

17 WIND ENERGY↗

Investigation of Innovative Rotor Concepts for the Big Adaptive Rotor Project

The Big Adaptive Rotor (BAR) project is funded by the U.S. Department of Energy (DOE) Wind Energy Technologies Office and has the objective of researching and developing innovative technologies that enable large land-based rotors that have the potential to produce a 10% increase in CF over current technology. The innovative technologies must have a reduction in specific power to at least 150 W/m2 at an International Electrotechnical Commission Class III wind site for a 5-megawatt (MW) or higher rating and maintain a competitive levelized cost of energy (LCOE) compared to current technology. The purpose of this document is to: 1. Identify and classify innovative BAR concepts, 2. Evaluate the concepts in terms of their potential to impact wind plant LCOE and other performance metrics of interest and identify science and engineering challenges that would limit the commercialization of these concepts, and 3. Quantitatively analyze and compare the BAR concepts.

17 WIND ENERGY↗

A Detailed Wind Turbine Blade Cost Model

This technical report describes a detailed blade cost model for wind turbine blades in the range of 30 to 100 meters in length. The model estimates the bill of materials, the number of labor hours and the cycle time, and the costs related to direct labor, overhead, buildings, tooling, equipment, maintenance, and capital. The model applies to multimegawatt wind turbine blades manufactured via vacuum-assisted resin transfer molding, which is the most commonly adopted manufacturing method for modern wind turbine blades. The model is implemented both in a large Excel file and in Python. The latter is freely available in the repository of the Wind-Plant Integrated System Design and Engineering Model (WISDEM[R]) github.com/WISDEM. WISDEM is a multidisciplinary analysis and optimization design framework developed at the National Renewable Energy Laboratory. This blade cost model represents a valuable tool to run design optimization studies for wind turbines. In this report, the model is first presented with its approach and assumptions and then computes the costs of three blades, namely the 33-meter-long Wind Partnership for Advanced Component Technologies (WindPACT) study blade, the 63-meter-long International Energy Agency (IEA) Wind Task 37 land-based reference wind turbine blade, and the 100-meter-long SNL-100-03 blade developed at Sandia National Laboratories.

17 WIND ENERGY↗

IEA Wind TCP Task 37: Systems Engineering in Wind Energy - WP2.1 Reference Wind Turbines

This report describes two wind turbine models developed within the second work package (WP2) of IEA Wind Task 37 on Wind Energy Systems Engineering: Integrated RD&D. The wind turbine models aim at acting as references for future research projects on wind energy, representing a modern land-based wind turbine and a next generation offshore wind turbine. The land-based design is a class IIIA geared configuration with a rated electrical power of 3.4-megawatts, a rotor diameter of 130 meters (m), and a hub height of 110 m. The offshore design is a class IA configuration with a rated electrical power of 10.0 megawatts, a rotor diameter of 198 m, and a hub height of 119 m. The offshore turbine adopts a direct-drive generator.

17 WIND ENERGY↗

Increasing Wind Turbine Tower Heights: Opportunities and Challenges

This report has two primary objectives. First, it seeks to inform the opportunities and potential associated with increasing wind turbine hub heights. It also explores the conditions and locations where taller towers offer the most significant potential to increase wind technology performance and reduce costs. The second objective is to examine the status of tall tower technology as a key subcomponent of wind power advancement.

17 WIND ENERGY↗

IEA Wind TCP: Results of IEA Wind TCP Workshop on a Grand Vision for Wind Energy Technology

This report provides workshop findings including the future landscape of the electricity system with over 50% of the electricity supply from wind energy, a review of key innovation opportunities in different topic areas that will be embodied in the wind power plant of the future (including innovations that both reduce levelized cost of energy and increase system value of wind energy), and identification of the key R&D challenges that must be addressed to realize the wind power plant of the future and the Grand Vision.

17 WIND ENERGY↗

Initial Results From a Field Campaign of Wake Steering Applied at a Commercial Wind Farm: Part 1

Wake steering is a form of wind farm control in which turbines use yaw offsets to affect wakes in order to yield an increase in total energy production. In this first phase of a study of wake steering at a commercial wind farm, two turbines implement a schedule of offsets. Results exploring the observed performance of wake steering are presented, as well as some first lessons learned. For two closely spaced turbines, an approximate 13 % increase in energy was measured on the downstream turbine over a 10° sector. Additionally, the increase of energy for the combined upstream/downstream pair was found to be in line with prior predictions. Lastly, the influence of atmospheric stability over the results is explored.

17 WIND ENERGY↗

Data-Driven Machine Learning for Wind Plant Flow Modeling

In this study, we introduce a data-driven machine learning framework for improving the accuracy of wind plant flow models by learning turbulence model corrections based on data from higher-fidelity simulations. First, a high-dimensional PDE-constrained optimization problem is solved using gradient-based optimization with adjoints to determine optimal eddy viscosity fields that improve the agreement of a medium-fidelity Reynolds-Averaged Navier Stokes (RANS) model with large eddy simulations (LES). A supervised learning problem is then constructed to find general, predictive representations of the optimal turbulence closure. A machine learning technique using Gaussian process regression is trained to predict the eddy viscosity field based on local RANS flow field information like velocities, pressures, and their gradients. The Gaussian process is trained on LES simulations of a single turbine and implemented in a wind plant simulation with 36 turbines. We show improvement over the baseline RANS model with the machine learning correction, and demonstrate the ability to provide accurate confidence levels for the corrections that enable future uncertainty quantification studies.

17 WIND ENERGY↗

Assessment of Wind Turbine Component Loads Under Yaw-Offset Conditions

Renewed interest in yaw control for wind turbine and power plants for wake redirection and load mitigation demands a clear understanding of the effects of running with skewed inflow. In this paper, we investigate the physics of yawed operations, building up the complexity from a simplified analytical treatment to more complex aeroelastic simulations. Results in terms of damage equivalent loads (DELs) and extreme loads under operating, misaligned conditions are compared to data collected from an instrumented, utility-scale wind turbine. The analysis shows that multiple factors are responsible for the DELs of the various components, and that airfoil aerodynamics, elastic characteristics of the rotor, and turbulence intensities are the primary drivers. Both fatigue and extreme loads are observed to have relatively complex trends with yaw offsets, which can change depending on the wind-speed regime. As a result, good agreement is found between predicted and measured trends for both fatigue and ultimate loads.

17 WIND ENERGY↗

WindPACT Reference Wind Turbines

To fully understand how loads and turbine cost scale with turbine size, it is necessary to have identical turbine models that have been scaled to different rated powers. The report presents the WindPACT baseline models, which are a series of four baseline models that were designed to facilitate investigations into the scalings of loads and turbine cost with size. The models have four different rated powers (750 kW, 1.5 MW, 3.0 MW, and 5.0 MW), and each model was designed to its specified rated power using the same design methodology. The models were originally implemented in FAST_AD, the predecessor to NREL's open-source wind turbine simulator FAST, but have yet to be implemented in FAST. This report contains the specifications for all four WindPACT baseline models - including structural, aerodynamic, and control specifications - along with the inherent assumptions and equations that were used to calculate the model parameters. It is hoped that these baseline models will serve as extremely useful resources for investigations into the scalings of costs, loads, or optimization routines.

17 WIND ENERGY↗

Enabling the SMART Wind Power Plant of the Future Through Science-Based Innovation

This report describes the scientific challenges facing wind energy today and the recent scientific advancements that position the research community to tackle those challenges, as well as the new U.S. Department of Energy applied research program Atmosphere to Electrons that takes an integrated approach to addressing those challenges. It also ties these resulting scientific accomplishments to future technological innovation and quantifies the impact of that collection of innovations on 2030 wind power cost of energy.

17 WIND ENERGY↗