Engineering Papers⌕ Search

Engineering topics

Duran, Adam

Publications and source records attributed to Duran, Adam.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

DarkQuest: A dark sector upgrade to SpinQuest at the 120 GeV Fermilab Main Injector

Expanding the mass range and techniques by which we search for dark matter is an important part of the worldwide particle physics program. Accelerator-based searches for dark matter and dark sector particles are a uniquely compelling part of this program as a way to both create and detect dark matter in the laboratory and explore the dark sector by searching for mediators and excited dark matter particles. This paper focuses on developing the DarkQuest experimental concept and gives an outlook on related enhancements collectively referred to as LongQuest. DarkQuest is a proton fixed-target experiment with leading sensitivity to an array of visible dark sector signatures in the MeV-GeV mass range. Because it builds off of existing accelerator and detector infrastructure, it offers a powerful but modest-cost experimental initiative that can be realized on a short timescale.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Code Artifact for: Clustering Analysis of Commercial Vehicles Using Automatically Extracted Features from Time Series Data [SWR-21-96]

This repository contains data ingestion, feature extraction, and analysis code used in NREL Technical report "Clustering Analysis of Commercial Vehicles Using Automatically Extracted Features from Time Series Data." The code is written in Python. The ETL and feature extraction code must be run in a Spark context. The analysis code can be run without Spark, provided you have pre-computed features in a CSV file. Analysis code related to the NREL Technical Report NREL/TP-2C00-74212. Includes PySpark functions to perform trip segmentation and feature extraction over big time series data in Apache Spark. Includes "domain specific" features such as Aerodynamic Speed (ft/s), Characteristic Acceleration (ft/s2), Percent Below 55 (%), Percent Zero (%), Stops Per Mile, Average Speed (mph), Maximum Speed (mph), and Speed Standard Deviation (mph). Includes Pyspark UDF to compute "domain agnostic" features using the TSFresh library. This software record also includes the analysis notebooks and code to generate the results in the previously mentioned technical report.

Perr-Sauer, Jordan↗
DOE OSTI2021

A Deterministic Multivariate Clustering Method for Drive Cycle Generation from In-Use Vehicle Data

Accurately characterizing vehicle drive cycles plays a fundamental role in assessing the performance of new vehicle technologies. Repeatable, short duration representative drive cycles facilitate more informed decision making, resulting in improved test procedures and more successful vehicle designs. With continued growth in the deployment of onboard telematics systems employing global positioning systems (GPS), large scale, low cost collection of real-world vehicle drive cycle data has become a reality. As a result of these technological advances, researchers, designers, and engineers are no longer constrained by lack of operating data when developing and optimizing technology, but rather by resources available for testing and simulation. Experimental testing is expensive and time consuming, therefore the need exists for a fast and accurate means of generating representative cycles from large volumes of real-world driving data. This paper explores the development and initial validation of a method of generating representative drive cycles from large collections of real-world vehicle data using a deterministic multivariate clustering approach. Starting with theory and diving into the methodology behind representative cycle generation, the paper aims to also present graphical and tabular results of initial validation via vehicle simulation and chassis dynamometer testing. Additional topics for further research and areas for ongoing development will also be presented.

47 OTHER INSTRUMENTATION↗
NASA NTRS2020

Distributed System of Mobile Passive Tensegrity Structures

A study on the application of spherical tensegrity structures to a passively mobile tumbleweed-like concept was developed and tested. Parameterized sizing tools were developed to understand environmental and geometrical sensitivities and maintain the ability to apply the concept to various environments. The sensitivity studies were then used to inform the design, and then a prototype model for an Earth environment was built to correlate the sizing tool outputs with experimental data. This prototype underwent testing in order to understand performance of the structure in more controlled (wind tunnel testing) environments and more realistic (field testing) environments. This paper will describe the design derivation and sensitivity studies performed along with the test results of the prototype structure.

Ayad, Allison↗
DOE OSTI2017

Potentials for Platooning in U.S. Highway Freight Transport

Smart technologies enabling connection among vehicles and between vehicles and infrastructure as well as vehicle automation to assist human operators are receiving significant attention as a means for improving road transportation systems by reducing fuel consumption - and related emissions - while also providing additional benefits through improving overall traffic safety and efficiency. For truck applications, which are currently responsible for nearly three-quarters of the total U.S. freight energy use and greenhouse gas (GHG) emissions, platooning has been identified as an early feature for connected and automated vehicles (CAVs) that could provide significant fuel savings and improved traffic safety and efficiency without radical design or technology changes compared to existing vehicles. A statistical analysis was performed based on a large collection of real-world U.S. truck usage data to estimate the fraction of total miles that are technically suitable for platooning. In particular, our analysis focuses on estimating 'platoonable' mileage based on overall highway vehicle use and prolonged high-velocity traveling, and established that about 65% of the total miles driven by combination trucks from this data sample could be driven in platoon formation, leading to a 4% reduction in total truck fuel consumption. This technical potential for 'platoonable' miles in the United States provides an upper bound for scenario analysis considering fleet willingness and convenience to platoon as an estimate of overall benefits of early adoption of connected and automated vehicle technologies. A benefit analysis is proposed to assess the overall potential for energy savings and emissions mitigation by widespread implementation of highway platooning for trucks.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2017

Bayesian Parameter Estimation for Heavy-Duty Vehicles

Accurate vehicle parameters are valuable for design, modeling, and reporting. Estimating vehicle parameters can be a very time-consuming process requiring tightly-controlled experimentation. This work describes a method to estimate vehicle parameters such as mass, coefficient of drag/frontal area, and rolling resistance using data logged during standard vehicle operation. The method uses Monte Carlo to generate parameter sets which is fed to a variant of the road load equation. Modeled road load is then compared to measured load to evaluate the probability of the parameter set. Acceptance of a proposed parameter set is determined using the probability ratio to the current state, so that the chain history will give a distribution of parameter sets. Compared to a single value, a distribution of possible values provides information on the quality of estimates and the range of possible parameter values. The method is demonstrated by estimating dynamometer parameters. Results confirm the method's ability to estimate reasonable parameter sets, and indicates an opportunity to increase the certainty of estimates through careful selection or generation of the test drive cycle.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2016

PEES (Parameter Estimator for Engineering Systems) [SWR-16-38]

This software model generates vehicle parameter sets for downstream modeling applications using real-world data. Value to users is provided through improvements to modeling activities as a result of decreases in time taken during model development and validation. Currently configured for transportation modeling activities, the software provides initial estimates for multiple fundamental vehicle parameters including mass, coefficient of drag, and tire rolling resistance using real-world drive and duty cycle information as inputs.

Miller, Eric↗
DOE OSTI2016

The Evaluation of the Impact of New Technologies for Medium-Duty Parcel Delivery Trucks on Fuel Consumption

In this paper, researchers at the National Renewable Energy Laboratory present the results of simulation studies to evaluate potential fuel savings as a result of improvements to vehicle rolling resistance, coefficient of drag, and vehicle weight as well as hybridization for four power trains for medium-duty parcel delivery vehicles. The vehicles will be modeled and simulated over 1,290 real-world driving trips to determine the fuel savings potential based on improvements to each technology and to identify best use cases for each platform. The results of impacts of new technologies on fuel saving will be presented, and the most favorable driving routes on which to adopt them will be explored.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2016

EPA GHG certification of medium- and heavy-duty vehicles: Development of road grade profiles representative of US controlled access highways

In collaboration with the U.S. Environmental Protection Agency and the U.S. Department of Energy, the National Renewable Energy Laboratory has conducted a national analysis of road grade characteristics experienced by U.S. medium- and heavy-duty trucks on controlled access highways. These characteristics have been developed using TomTom's commercially available street map and road grade database. Using the TomTom national road grade database, national statistics on road grade and hill distances were generated for the U.S. network of controlled access highways. These statistical distributions were then weighted using data provided by the U.S. Environmental Protection Agency for activity of medium- and heavy-duty trucks on controlled access highways. Here, the national activity-weighted road grade and hill distance distributions were then used as targets for development of a handful of sample grade profiles potentially to be used in the U.S. Environmental Protection Agency's Greenhouse Gas Emissions Model certification tool as well as in dynamometer testing of medium- and heavy-duty vehicles and their powertrains.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2016

The Evaluation of the Impact of New Technologies for Different Powertrain Medium-Duty Trucks on Fuel Consumption

In this paper, researchers at the National Renewable Energy Laboratory present the results of simulation studies to evaluate potential fuel savings as a result of improvements to vehicle rolling resistance, coefficient of drag, and vehicle weight as well as hybridization for four powertrains for medium-duty parcel delivery vehicles. The vehicles will be modeled and simulated over 1,290 real-world driving trips to determine the fuel savings potential based on improvements to each technology and to identify best use cases for each platform. The results of impacts of new technologies on fuel saving will be presented, and the most favorable driving routes on which to adopt them will be explored.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2016

Fuel and Emissions Reduction in Electric Power Take-Off Equipped Utility Vehicles

The National Renewable Energy Laboratory (NREL) evaluated the performance of Pacific Gas and Electric plug-in hybrid electric power take off (ePTO) utility trucks equipped with Altec, Inc.'s Jobsite Energy Management System. NREL collected on-road performance data from Class 5 utility 'trouble trucks' and Class 8 material handlers and developed representative drive cycles for chassis dynamometer testing. The drive cycles were analyzed and jobsite energy use was quantified for impacts and potential further hybridization for the utility truck vocation.

33 ADVANCED PROPULSION SYSTEMS↗