Engineering Papers⌕ Search

Engineering topics

Dun, Chaochao

Publications and source records attributed to Dun, Chaochao.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Electrospun Ti–Zr Oxide Heterostructures Enable Strongly Anchored Ultralow-Ir Anodes for Durable Acidic Oxygen Evolution

Proton-exchange-membrane water electrolysis (PEMWE) requires acidic oxygen-evolution-reaction (OER) anodes that combine high activity, high durability, and low Ir loading. Here, we report a Ti-Zr composite electrospun oxide (ESO) nanorod support that enables ultralow-Ir anodes for high-performance PEMWE. Zr-containing Ti oxide heterostructures stabilize anatase-rich TiO2, tune the local oxygen-coordination environment, and strengthen interfacial anchoring of IrOx under acidic anodic conditions. The electrospun nanorod network further creates an open, mechanically coherent catalyst layer that improves Ir utilization, ionomer penetration, and mass transport. At an anode loading of 0.2 mgIr cm-2, the optimized Ir/TiZr20-ESO anode delivers a PEMWE mass activity of 0.99 A mgIr-1 at 1.45 V, 28.3 and 43.0 times higher than commercial Ir black and commercial IrO2/TiO2, respectively. The same anode reaches 3.0 and 4.0 A cm-2 at 1.75 and 1.83 V, respectively, and sustains 2000 h operation at 2.0 A cm-2. Also, accelerated stress tests up to 525 hours over 31,500 cycles confirm promising long-term durability, with an insignificant performance decay of 0.4 μV per cycle. Density functional theory indicates that the Ti-Zr oxide heterostructure suppresses Ti demetallation and strengthens IrO2 interfacial binding, rationalizing the improved high-current-density stability.

25 ENERGY STORAGE↗
DOE OSTI2026

Carbon–Mineral Slurry Electrodes for Energy-Efficient Lithium Leaching from Low-Grade Clay Feedstocks

Lithium extraction from clay deposits is typically hampered by low lithium grades and the high capital and energy demands of conventional processing. We report an ambient temperature electrochemical leaching method that bypasses high-temperature roasting and concentrated-acid leaching, directly liberating 93% of lithium from low-grade hectorite in 24 h at 1 V, with 77% Faradaic efficiency, an energy intensity of 3.91 MWh/t lithium carbonate equivalent (LCE). Utilizing a carbon-mineral composite slurry electrode strategy we achieve electron-driven lattice deconstruction through iron oxidation coupled with proton uptake to drive lithium deintercalation, offering a new strategy for low-temperature critical-metal recovery. A preliminary cost analysis highlights pathways to achieving cost intensities below $3000/t LCE. Challenges remain in improving current density, extraction kinetics, and demonstrating process scalability, however, this work establishes a foundation for effective electrochemical lithium extraction from abundant but previously uneconomical clay deposits.

Haddad, Andrew Z↗
DOE OSTI2025

All 2D Material Printed Diodes and Circuits on Paper for Sustainable Electronics

Sustainable electronics aim to reduce environmental impact by using ecofriendly materials, energy-efficient manufacturing, and recyclable components. However, existing approaches rely on complex, resource-intensive methods, rare metals, or nanomaterials with limited stability as well as plastic substrates, raising sustainability issues. Solution-processed two-dimensional (2D) materials offer a promising alternative: water-based and biocompatible conductive, semiconductive, and insulating 2D material inks can be produced with scalable techniques and are suitable for the fabrication of fully printed devices on low-cost and biodegradable paper substrates. However, 2D material only and fully printed diodes on paper have not yet been reported. Here, we demonstrate fully inkjet-printed 2D material-based diodes on paper using metal-insulator-semiconductor and metal-insulator-metal-semiconductor architectures. Water-based graphene and MoS2 inks, prepared by liquid-phase exfoliation, are used for the metallic and insulating films, while electrochemical exfoliation is used to produce the semiconducting MoS2 ink. The highest forward-to-reverse current ratio obtained is 330 (at ±2 V), while the forward current density is 1 mA/cm2 (at 1 V), making the diode performance comparable to the best solution-processed diodes reported so far. However, in contrast to previous works, fabrication occurs entirely at room temperature and ambient pressure, without using high-pressure sputtering, thermal evaporation, and any precious metal ink. The devices maintain stable performance under bending up to strain of 4% over 10,000 cycles. Finally, the diodes are successfully integrated with other 2D-material based electrical components to realize fully printed RC circuits, differentiators, integrators, and AC-to-DC converters onto paper, hence demonstrating the suitability of our approach for sustainable and disposable integrated circuits.

2D materials↗
DOE OSTI2025

Entropy-Driven Structural Evolution in Ceramic Oxides

High-entropy ceramics, with five or more elements randomly occupying the same cation crystallographic sites, offer vast compositional diversity and unique properties for material design and applications. However, for many dissimilar elements, entropic stabilization cannot overcome the enthalpic barrier to cation substitution. As a result, most high-entropy ceramics incorporate only a few similar elements, limiting the in-depth exploration of the effect of entropy on ceramic properties. Here, we first use density functional theory to model fluorite crystal structures composed of 1-10 elements and then experimentally present practical fluorite oxide nanostructures containing 1, 3, 8, and 15 metals, as well as a record-breaking 25-element high-entropy ceramic incorporating a diverse palette of rare-earth, transition, alkaline, p-block, and noble metals. As entropy increases, structural and configurational disorder in the solid solution rises, altering structural features such as lattice distortion, crystallinity, homogeneity, defect density, and thermal stability. This research provides new insights and understanding of the role of entropy in stabilizing compositionally complex ceramics.

Liu, Shuo↗
DOE OSTI2025

Decoding the Desorption Mechanism of 2LiH:1Mg(NH2)2 Using Metal Borohydrides

The complex metal hydride 2LiH:1Mg­(NH2)2 has emerged as a promising material for stationary hydrogen storage applications, such as seasonal storage or energy backup systems, due to its high volumetric and gravimetric capacities and robust reversibility. However, its widespread adoption is hindered by sluggish reaction rates, performance degradation upon cycling, and improper end-use cases. To address these problems and better understand the desorption pathway, we used metal borohydrides (MBH4; M = Li–Cs) as chemical probes. A thorough analysis of the bulk behavior of all six materials, including hydrogen cycling experiments, X-ray absorption spectroscopy, FTIR, pXRD, solid-state NMR, and ab initio DFT simulations, shows that the borohydride additives decrease the activation energy of hydrogen release by about 20 kJ/mol for MBH4@2:1 materials versus pristine. Furthermore, more surface-sensitive studies show that the amide-to-imide desorption pathway in these materials, while essentially complete in the bulk, is incomplete in the near-surface region, suggesting an “inverse core–shell” desorption mechanism for amide dehydrogenation to imide. The kinetic enhancements produced by MBH4 additives (M = K, Rb, and Cs) are attributed to the destabilization of the amide N–H bond and interaction with the LiH/Mg­(NH2)2 interface to promote H–H bond formation. An inverse core-shell mechanism is also operative in the hydrogen desorption for the 2LiH:1LiNH2 system, suggesting this may be a general feature of amides. Given the fast dehydrogenation rate and large gravimetric capacity, these materials satisfy these requirements for telecom backups and seasonal microgrid storage applications.

Absorption↗
DOE OSTI2025

Revealing Coexisting Cu0–Cu+ Sites in Cu3N Nanoensembles for Selective CC Coupling of CO2 Under Low Overpotential

To address a long-existing debate on what copper species are responsible for efficient CC coupling, especially ethanol formation, in electrochemical CO2 reduction reaction, herein, a comprehensive study using Cu3N nanocubes with a uniform size and shape, alongside a single crystalline phase is reported. The Cu3N nanoensemble electrode has a remarkable Faradaic efficiency (FE) of 64% for ethanol production at a relatively low potential of -0.6 V versus reversible hydrogen electrode. Through in-operando X-ray absorption spectroscopy study, a dynamic phase evolution that directly correlates with changes in FE across varying applied potentials is observed. Notably, the nanoensemble with a composition of ≈71% Cu+ and 29% Cu0 is identified as being selective for ethanol formation at the low overpotential. Conversely, a predominantly metallic Cu phase formed at potentials more negative than -0.6 V favors the hydrogen evolution reaction. Density functional theory calculations at the Cu3N-Cu interface substantiate that the coexistence of Cu0-Cu+ not only energetically favors the ethanol reaction pathway but also destabilizes the intermediates for ethylene pathway.

*CH-CHO as an intermediate for ethanol production↗
DOE OSTI2025

Ruthenium/Carbon Nanocomposites for Efficient Hydrogen Electrocatalysis: Impacts of Halide Residues

Ruthenium has emerged as a promising substitute for platinum toward the hydrogen evolution/oxidation reaction (HER/HOR). Herein, ruthenium/carbon composites are prepared by magnetic induction heating (300 A, 10 s) of RuCl3, RuBr3 or RuI3 loaded on hollow N-doped carbon cages (HNC). The HNC-RuCl3-300A sample consists of Ru nanoparticles (dia. 1.96 nm) and abundant Cl residues. HNC-RuBr3-300A possesses a larger nanoparticle size (≈19.36 nm) and lower content of Br residues. HNC-RuI3-300A contains only bulk-like Ru agglomerates with a minimal amount of I residues, due to reduced Ru-halide bonding interactions. Among these, HNC-RuCl3-300A exhibits the best HER activity in alkaline media, with a low overpotential of only -26 mV to reach 10 mA cm-2, even outperforming Pt/C, and can be used as the cathode catalyst for anion exchange membrane water electrolyzer (along with commercial RuO2 as the anode catalyst), producing 0.5 A cm- 2 at 1.88 V for up to 100 h, a performance markedly better than that with Pt/C. HNC-RuCl3-300A also exhibits the best HOR activity, with a half-wave potential (+18 mV) even lower than that of Pt/C (+35 mV). These activities are ascribed to the combined contributions of small Ru nanoparticles and Ru-to-halide charge transfer that weaken H adsorption.

Yu, Bingzhe↗
DOE OSTI2025

Iron-assisted growth of anisotropic ZnO nanostructures

Anisotropic nanostructures offer a promising pathway to modulate structure-function relationships of materials. However, the correlation between growth direction of high-quality anisotropic nanostructures, the synthesis conditions and mechanisms controlling their growth, and their magnetic and optical properties remain underexplored. In this study, we developed an iron-assisted anisotropic growth method to form zinc oxide nanostructures on the O-polar (0001̄) surface, resulting in two distinct ZnO-based nanostructures: hand-shaped nanostructures and truncated hexagonal nanopyramids. In contrast to most reports of anisotropic nanostructure synthesis, which primarily focus on morphology control through ligand-ligand interactions, the current study probes the effects of doping on anisotropic growth, and how doping, along with ligand-ligand interactions and facet-specific ligand binding, control nanostructure morphology. The reaction mechanisms leading to formation of these novel structures were thoroughly probed by systematically manipulating synthesis parameters. A two-step formation mechanism was identified: first, a hexagonal platform forms through an initial homogeneous nucleation process, followed by secondary heterogeneous nucleation, which results in metastable secondary nanostructures growing on the oxygen-rich template. Optical and magnetic properties of these Fe/ZnO nanostructures were characterized. Our findings provide a new strategy that uses a magnetic element as a dopant to build new nanostructures of ZnO with controllable size and shape growing on an oxygen-rich crystal plane. These materials could have applications in novel technologies where both optoelectronic and magnetic properties are of interest.

Xuan, Zhengxi↗
DOE OSTI2025

Understanding the Mn dissolution mechanism in rock salt-type Li 4 Mn 2 O 5 cathodes

For the first time, a detailed exploration of Mn dissolution in disordered rock salt (DRX) Li 4 Mn 2 O 5 is presented. Herein, we apply a suite of synchrotron and lab scale X-ray techniques to both the cathode and the separator harvested from pristine, charged, or cycled lithium half-cells containing the disordered rock salt (DRX) material Li 4 Mn 2 O 5 , in order to understand Mn dissolution processes throughout charging and discharging. Previous research has hypothesized two concurrent effects that may drive Mn dissolution in cells during cycling: acid-induced disproportionation of Jahn–Teller active Mn 3+ and structural rearrangement of the cathode lattice. Through depth probing of the Mn oxidation state in both the cathode and separator via soft X-ray absorption spectroscopy (XAS), hard XAS, and X-ray photoelectron spectroscopy (XPS) in progressive states-of-charge, as well as extended X-ray absorption fine structure (EXAFS) analysis of the local Mn environment, the primary driving force of Mn dissolution is determined to be high-voltage structural rearrangement above 4.2 V. Mn dissolution is, additionally, a main source of capacity fade in Li 4 Mn 2 O 5 DRX cells, which retain only 59% capacity after 20 cycles.

Theibault, Monica↗
DOE OSTI2024

Mechanism and Kinetics of Ethanol–Acetaldehyde Conversion to 1,3-Butadiene over Isolated Lewis Acid La Sites in Silanol Nests in Dealuminated Beta Zeolite

Biomass-derived ethanol (EtOH) and acetaldehyde (AcH) conversion to 1,3-butadiene (1,3-BD) is an alternative process for 1,3-BD production. The present investigation reports the preparation and characterization of isolated La sites introduced into the silanol nests in DeAlBEA as well as detailed studies of the mechanism and kinetics for the conversion of an EtOH-AcH mixture to 1,3-BD. La sites supported on DeAlBEA are found to be present as (≡SiO) 2 La-OH groups that are H-bonded with adjacent Si-OH groups, possessing high C-C coupling activity and stability, superior to state-of-the-art Y-DeAlBEA. La sites supported on silica (La-SiO 2 ) with a similar chemical structure but no H-bonding interaction with Si-OH groups were prepared for comparison. Lewis acid La sites promote AcH aldol condensation, and the activity of such sites is nearly identical for both La-DeAlBEA and La-SiO 2 . Further, the rate of C 4 product formation increases by a factor of 4.8 upon addition of EtOH to the feed of AcH over La-DeAlBEA, whereas that over La/SiO 2 remains unchanged. Investigation of the mechanism and kinetics of AcH aldol condensation and EtOH-AcH conversion to 1,3-BD revealed two C-C bond forming pathways-AcH aldol condensation by Lewis acid La sites and direct coupling of EtOH-AcH over H-bonded (≡SiO) 2 La-OH···HO-Si≡ sites. This study provides important information about the role of the local environment of isolated Lewis acid sites and their effects on the direct coupling of EtOH and AcH to form 1,3-BD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A general flame aerosol route to high-entropy nanoceramics

High-entropy ceramics are an emerging class of materials with fascinating characteristics. However, elemental immiscibility and crystal complexity limit the development of a general synthesis strategy, and common methods yield bulk materials. Here, we introduce a transformative non-equilibrium flame aerosol technique for synthesizing high-entropy nanoceramics. This scalable, one-step process enables the production of high-entropy oxide nanoceramics with an unprecedented diversity of crystal structures, including fluorite-phase materials that integrate up to 22 distinct cation elements. The method’s capacity for entropic stabilization and grain refinement significantly improves the thermal stability of these nanostructures. In a representative application, a Pt-(MgCoNiCuZn)O high-entropy single-atom catalyst showed superior activity and long-term stability, maintaining constant CO 2 conversion over 670 h and dramatically outperforming conventional catalysts. Finally, the general approach opens a vast composition and structure space for the creation of high-entropy oxide nanomaterials for application across diverse fields, including catalysis, energy storage, sensing, and thermal management.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mechanochemical in Situ Encapsulation of Palladium in Covalent Organic Frameworks

Palladium-encapsulated covalent organic frameworks (Pd/COFs) have garnered enormous attention in heterogeneous catalysis. However, the dominant ex situ encapsulation synthesis is tedious (multistep), time-consuming (typically 4 days or more), and involves the use of noxious solvents. Here we develop a mechanochemical in situ encapsulation strategy that enables the one-step, time-efficient, and environmentally benign synthesis of Pd/COFs. By ball milling COF precursors along with palladium acetate (Pd(OAc) 2 ) in one pot under air at room temperature, Pd/COF hybrids were readily synthesized within an hour, exhibiting high crystallinity, uniform Pd dispersion, and superb scalability up to gram scale. Moreover, this versatile strategy can be extended to the synthesis of three Pd/COFs. Remarkably, the resulting Pd/DMTP-TPB showcases extraordinary activity (96-99% yield in 1 h at room temperature) and broad substrate scope (>10 functionalized biaryls) for the Suzuki-Miyaura coupling reaction of aryl bromides and arylboronic acids. Furthermore, the heterogeneity of Pd/DMTP-TPB is verified by recycling and leaching tests. Finally, the mechanochemical in situ encapsulation strategy disclosed herein paves a facile, rapid, scalable, and environmentally benign avenue to access metal/COF catalysts for efficient heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Nano-enhanced solid-state hydrogen storage: Balancing discovery and pragmatism for future energy solutions

Nanomaterials have revolutionized the battery industry by enhancing energy storage capacities and charging speeds, and their application in hydrogen (H 2 ) storage likewise holds strong potential, though with distinct challenges and mechanisms. H 2 is a crucial future zero-carbon energy vector given its high gravimetric energy density, which far exceeds that of liquid hydrocarbons. However, its low volumetric energy density in gaseous form currently requires storage under high pressure or at low temperature. This review critically examines the current and prospective landscapes of solid-state H 2 storage technologies, with a focus on pragmatic integration of advanced materials such as metal-organic frameworks (MOFs), magnesium-based hybrids, and novel sorbents into future energy networks. These materials, enhanced by nanotechnology, could significantly improve the efficiency and capacity of H 2 storage systems by optimizing H 2 adsorption at the nanoscale and improving the kinetics of H 2 uptake and release. We discuss various H 2 storage mechanisms—physisorption, chemisorption, and the Kubas interaction—analyzing their impact on the energy efficiency and scalability of storage solutions. The review also addresses the potential of “smart MOFs”, single-atom catalyst-doped metal hydrides, MXenes and entropy-driven alloys to enhance the performance and broaden the application range of H 2 storage systems, stressing the need for innovative materials and system integration to satisfy future energy demands. High-throughput screening, combined with machine learning algorithms, is noted as a promising approach to identify patterns and predict the behavior of novel materials under various conditions, significantly reducing the time and cost associated with experimental trials. In closing, we discuss the increasing involvement of various companies in solid-state H 2 storage, particularly in prototype vehicles, from a techno-economic perspective. In conclusion, this forward-looking perspective underscores the necessity for ongoing material innovation and system optimization to meet the stringent energy demands and ambitious sustainability targets increasingly in demand.

25 ENERGY STORAGE↗
DOE OSTI2024

Nitrogen-Doped Graphene-Like Carbon Intercalated MXene Heterostructure Electrodes for Enhanced Sodium- and Lithium-Ion Storage

MXene is investigated as an electrode material for different energy storage systems due to layered structures and metal-like electrical conductivity. Experimental results show MXenes possess excellent cycling performance as anode materials, especially at large current densities. However, the reversible capacity is relatively low, which is a significant barrier to meeting the demands of industrial applications. This work synthesizes N-doped graphene-like carbon (NGC) intercalated Ti 3 C 2 T x (NGC-Ti 3 C 2 T x ) van der Waals heterostructure by an in situ method. The as-prepared NGC-Ti 3 C 2 T x van der Waals heterostructure is employed as sodium-ion and lithium-ion battery electrodes. For sodium-ion batteries, a reversible specific capacity of 305 mAh g -1 is achieved at a specific current of 20 mA g -1 , 2.3 times higher than that of Ti 3 C 2 T x . For lithium-ion batteries, a reversible capacity of 400 mAh g -1 at a specific current of 20 mA g -1 is 1.5 times higher than that of Ti 3 C 2 T x . Both sodium-ion and lithium-ion batteries made from NGC-Ti 3 C 2 T x shows high cycling stability. The theoretical calculations also verify the remarkable improvement in battery capacity within the NGC-Ti 3 C 2 O 2 system, attributed to the additional adsorption of working ions at the edge states of NGC. This work offers an innovative way to synthesize a new van der Waals heterostructure and provides a new route to improve the electrochemical performance significantly.

25 ENERGY STORAGE↗
DOE OSTI2024

Unveiling Highly Sensitive Active Site in Atomically Dispersed Gold Catalysts for Enhanced Ethanol Dehydrogenation

Developing a desirable ethanol dehydrogenation process necessitates a highly efficient and selective catalyst with low cost. Herein, we show that the “complex active site” consisting of atomically dispersed Au atoms with the neighboring oxygen vacancies (Vo) and undercoordinated cation on oxide supports can be prepared and display unique catalytic properties for ethanol dehydrogenation. The “complex active site” Au–Vo–Zr 3+ on Au 1 /ZrO 2 exhibits the highest H 2 production rate, with above 37,964 mol H 2 per mol Au per hour (385 g H 2 $\text{g}^{-1}_{\text{Au}} \text{h}^{–1}$) at 350 °C, which is 3.32, 2.94 and 15.0 times higher than Au 1 /CeO 2 , Au 1 /TiO 2 , and Au 1 /Al 2 O 3 , respectively. Combining experimental and theoretical studies, we demonstrate the structural sensitivity of these complex sites by assessing their selectivity and activity in ethanol dehydrogenation. Our study sheds new light on the design and development of cost-effective and highly efficient catalysts for ethanol dehydrogenation. Fundamentally, atomic-level catalyst design by colocalizing catalytically active metal atoms forming a structure-sensitive “complex site”, is a crucial way to advance from heterogeneous catalysis to molecular catalysis. Finally, our study advanced the understanding of the structure sensitivity of the active site in atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unveiling Highly Sensitive Active Site in Atomically Dispersed Gold Catalysts for Enhanced Ethanol Dehydrogenation

Developing a desirable ethanol dehydrogenation process necessitates a highly efficient and selective catalyst with low cost. Herein, we show that the “complex active site” consisting of atomically dispersed Au atoms with the neighboring oxygen vacancies (Vo) and undercoordinated cation on oxide supports can be prepared and display unique catalytic properties for ethanol dehydrogenation. The “complex active site” Au-Vo-Zr 3+ on Au 1 /ZrO 2 exhibits the highest H 2 production rate, with above 37,964 mol H 2 per mol Au per hour (385 g H 2 $g^{-1}_{Au}$ h -1 ) at 350 °C, which is 3.32, 2.94 and 15.0 times higher than Au 1 /CeO 2 , Au 1 /TiO 2 , and Au 1 /Al 2 O 3 , respectively. Combining experimental and theoretical studies, we demonstrate the structural sensitivity of these complex sites by assessing their selectivity and activity in ethanol dehydrogenation. Our study sheds new light on the design and development of cost-effective and highly efficient catalysts for ethanol dehydrogenation. Fundamentally, atomic-level catalyst design by colocalizing catalytically active metal atoms forming a structure-sensitive “complex site”, is a crucial way to advance from heterogeneous catalysis to molecular catalysis. In conclusion, our study advanced the understanding of the structure sensitivity of the active site in atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Fast Room-Temperature Mg-Ion Conduction in Clay-Like Halide Glassy Electrolytes

The discovery of mechanically soft solid-state materials with fast Mg-ion conduction is crucial for the development of solid-state magnesium batteries. In this paper, novel magnesium gallium halide compounds are reported that achieve high ionic conductivity of 0.47 mS cm -1 at room temperature. These Mg-ion conductors obtained by ball milling Mg and Ga salts exhibit clay-like mechanical properties, enabling intimate contact at the electrode–electrolyte interface during battery cycling. With a combination of experimental and computational analysis, this study identifies that the soft-clay formation is induced by partial anion exchange during milling. This partial anion exchange creates undercoordinated magnesium ions in a chlorine-rich environment, yielding fast Mg-ion conduction. This work demonstrates the potential of clay-like halide electrolytes for all-solid-state magnesium batteries, with possible further extension to other multivalent battery systems.

36 MATERIALS SCIENCE↗