Engineering Papers⌕ Search

Engineering topics

Downie, John D.

Publications and source records attributed to Downie, John D..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Optimal binary phase and amplitude correlation filters for polarization-rotating spatial light modulators

We investigate the optimal designs of binary phase and amplitude filters (BPAFs) for the key correlation metrics of peak intensity, peak-to-correlation energy, SNR, and discrimination. These filters may be implemented on binary polarization-rotating spatial light modulators. We present simulation results comparing performance to conventional binary phase-only filters (BPOFs) and illustrating trade-offs between the different performance criteria in terms of the filter design parameter. We also extend the generalization to three-level phase and amplitude filters with a nonzero region of support and demonstrate that optimal three-level BPAFs can provide clearly superior performance to optimal three-level BPOFs.

Downie, John D.↗
NASA NTRS1993

Case study of binary and ternary synthetic discriminant function filters with similar in-class and out-of-class images

A simulation study is reported of the performance of two designs of ternary synthetic discriminant function (SDF) filters. The filters are compared to binary SDFs in terms of the probability of correct identification P(ID) between in-class and out-of-class image sets. Compared to binary synthetic discriminant function (BSDF) filters, both ternary SDF filters designs offer improved performance in P(ID) and thus allow extension of the maximum filter direction range when evaluated in the presence of white image noise. Larger distortion range filters translate to fewer correlations required to perform image identification, and thus higher system speed. The TSDF(SNR) filters had the highest of system performance, while TSDF(d) filters were able to improve discrimination to a degree, but their optimal designs had essentially the same SNR performance as the BSDF filters.

Downie, John D.↗
NASA NTRS1993

Optical information processing at NASA Ames Research Center

The combination of analog optical processors with digital electronic systems offers the potential of tera-OPS computational performance, while often requiring less power and weight relative to all-digital systems. NASA is working to develop and demonstrate optical processing techniques for on-board, real time science and mission applications. Current research areas and applications under investigation include optical matrix processing for space structure vibration control and the analysis of Space Shuttle Main Engine plume spectra, optical correlation-based autonomous vision for robotic vehicles, analog computation for robotic path planning, free-space optical interconnections for information transfer within digital electronic computers, and multiplexed arrays of fiber optic interferometric sensors for acoustic and vibration measurements.

Reid, Max B.↗
NASA NTRS1992

Accuracies Of Optical Processors For Adaptive Optics

Paper presents analysis of accuracies and requirements concerning accuracies of optical linear-algebra processors (OLAP's) in adaptive-optics imaging systems. Much faster than digital electronic processor and eliminate some residual distortion. Question whether errors introduced by analog processing of OLAP overcome advantage of greater speed. Paper addresses issue by presenting estimate of accuracy required in general OLAP that yields smaller average residual aberration of wave front than digital electronic processor computing at given speed.

Downie, John D.↗
NASA NTRS1992

Modified Synthetic-Discriminant-Function Optical Filter

Experiments demonstrated feasibility of synthetic-discriminant-function filter encoded in binary spatial light modulator. Filter is part of optoelectronic apparatus indicating degree of correlation between input image and any number of training images of same object at various positions and orientations. Used in optical correlator to recognize rotated images, or in tracking system to recognize moving vehicle or other substantially rigid object from any direction.

Reid, Max B.↗
NASA NTRS1992

Binary optical filters for scale invariant pattern recognition

Binary synthetic discriminant function (BSDF) optical filters which are invariant to scale changes in the target object of more than 50 percent are demonstrated in simulation and experiment. Efficient databases of scale invariant BSDF filters can be designed which discriminate between two very similar objects at any view scaled over a factor of 2 or more. The BSDF technique has considerable advantages over other methods for achieving scale invariant object recognition, as it also allows determination of the object's scale. In addition to scale, the technique can be used to design recognition systems invariant to other geometric distortions.

Reid, Max B.↗
NASA NTRS1992

Effects and correction of magneto-optic spatial light modulator phase errors in an optical correlator

The optical phase errors introduced into an optical correlator by the input and filter plane magnetooptic spatial light modulators have been studied. The magnitude of these phase errors is measured and characterized, their effects on the correlation results are evaluated, and a means of correction by a design modification of the binary phase-only optical-filter function is presented. The efficacy of the phase-correction technique is quantified and is found to restore the correlation characteristics to those obtained in the absence of errors, to a high degree. The phase errors of other correlator system elements are also discussed and treated in a similar fashion.

Downie, John D.↗
NASA NTRS1992

Optimizing binary phase and amplitude filters for PCE, SNR, and discrimination

Binary phase-only filters (BPOFs) have generated much study because of their implementation on currently available spatial light modulator devices. On polarization-rotating devices such as the magneto-optic spatial light modulator (SLM), it is also possible to encode binary amplitude information into two SLM transmission states, in addition to the binary phase information. This is done by varying the rotation angle of the polarization analyzer following the SLM in the optical train. Through this parameter, a continuum of filters may be designed that span the space of binary phase and amplitude filters (BPAFs) between BPOFs and binary amplitude filters. In this study, we investigate the design of optimal BPAFs for the key correlation characteristics of peak sharpness (through the peak-to-correlation energy (PCE) metric), signal-to-noise ratio (SNR), and discrimination between in-class and out-of-class images. We present simulation results illustrating improvements obtained over conventional BPOFs, and trade-offs between the different performance criteria in terms of the filter design parameter.

Downie, John D.↗
NASA NTRS1992

Error analysis of optical correlators

With the growing interest in using binary phase only filters (BPOF) in optical correlators that are implemented on magnetooptic spatial light modulators, an understanding of the effect of errors in system alignment and optical components is critical in obtaining optimal system performance. We present simulations of optical correlator performance degradation in the presence of eight errors. We break these eight errors into three groups: 1) alignment errors, 2) errors due to a combination of component imperfections and alignment errors, and 3) errors which result solely from non-ideal components. Under the first group, we simulate errors in the distance from the object to the first principle plane of the transform lens, the distance from the second principle plane of the transform lens to the filter plane, and rotational misalignment of the input mask with the filter mask. Next we consider errors which result from a combination of alignment and component imperfections. These include errors in the transform lens, the phase compensation lens, and the inverse Fourier transform lens. Lastly we have the component errors resulting from the choice of spatial light modulator. These include contrast error and phase errors caused by the non-uniform flatness of the masks. The effects of each individual error are discussed, and the result of combining all eight errors under assumptions of reasonable tolerances and system parameters is also presented. Conclusions are drawn as to which tolerances are most critical for optimal system performance.

Ma, Paul W.↗
NASA NTRS1991

Design of optimal binary phase and amplitude filters for maximization of correlation peak sharpness

Current binary-phase filters used for optical correlation are usually assumed to have uniform amplitude transmission. Here, a new type of filter is studied, the binary-phase-and-amplitude filter. If binary phase values of 0 and pi are assumed, the amplitude transmittance values of this type of filter can be optimized to maximize the peak sharpness. For a polarization-encoded binary-phase filter this can be translated into optimization of the rotation angle of the output polarizer following the filter-spatial-light modulator. An analytic expression is presented for the optimum polarizer angle and thus for the optimum binary-phase-and-amplitude filter design.

Downie, John D.↗
NASA NTRS1991

Optical computing at NASA Ames Research Center

Optical computing research at NASA Ames Research Center seeks to utilize the capability of analog optical processing, involving free-space propagation between components, to produce natural implementations of algorithms requiring large degrees of parallel computation. Potential applications being investigated include robotic vision, planetary lander guidance, aircraft engine exhaust analysis, analysis of remote sensing satellite multispectral images, control of space structures, and autonomous aircraft inspection.

Reid, Max B.↗
NASA NTRS1991

Correction of magnetooptic device phase errors in optical correlators through filter design modifications

We address the problem of optical phase errors in an optical correlator introduced by the input and filter plane spatial light modulators. Specifically, we study a laboratory correlator with magnetooptic spatial light modulator (MOSLM) devices. We measure and characterize the phase errors, analyze their effects on the correlation process, and discuss a means of correction through a design modification of the binary phase-only optical filter function. The phase correction technique is found to produce correlation results close to those of an error-free correlator.

Downie, John D.↗
NASA NTRS1991

Optical correlator techniques applied to robotic vision

Vision processing is one of the most computationally intensive tasks required of an autonomous robot. The data flow from a single typical imaging sensor is roughly 60 Mbits/sec, which can easily overload current on-board processors. Optical correlator-based processing can be used to perform many of the functions required of a general robotic vision system, such as object recognition, tracking, and orientation determination, and can perform these functions fast enough to keep pace with the incoming sensor data. We describe a hybrid digital electronic/analog optical robotic vision processing system developed at Ames Research Center to test concepts and algorithms for autonomous construction, inspection, and maintenance of space-based habitats. We discuss the system architecture design and implementation, its performance characteristics, and our future plans. In particular, we compare the performance of the system to a more conventional all digital electronic system developed concurrently. The hybrid system consistently outperforms the digital electronic one in both speed and robustness.

Hine, Butler P., III↗
NASA NTRS1990

Mapping considerations for optimal binary correlation filters

The optimality of correlation filters is an important issue in applications of pattern recognition. Both binary phase-only filters (BPOFs) and amplitude encoded binary phase-only filters (AE BPOFs) are considered and the results of optimizing the filters for a real world object (the Space Shuttle) are studied. It is found that while only small improvements result from optimizing a BPOF, optimization of the AE BPOF is quite important in obtaining a useful correlation function. In the case of an AE BPOF, both signal-to-noise and peak-to-sidelobe measures must be studied. Computer simulation and experimental correlation results are presented.

Downie, John D.↗
NASA NTRS1990

Experimental verification of modified synthetic discriminant function filters for rotation invariance

Experimental results are presented which demonstrate that effective binary synthetic discriminant functions (SDFs) can be constructed if the binary nature of the filter modulation is included in SDF synthesis. It is also shown that the iterative procedure needed to produce the SDF is well performed on the optical correlator, as opposed to off-line computation. Binary SDF filters have been demonstrated which produce approximately equal correlation peaks over in-plane rotation ranges up to 75 deg and out-of-plane rotation ranges up to 60 deg. This technique, combined with the translational position invariance of optical filters, allows a single filter to track a Shuttle Orbiter as it moves along a curved path across the input field.

Reid, Max B.↗
NASA NTRS1990

An adaptive holographic implementation of a neural network

A holographic implementation for neural networks is proposed and demonstrated as an alternative to the optical matrix-vector multiplier architecture. In comparison, the holographic architecture makes more efficient use of the system space-bandwidth product for certain types of neural networks. The principal network component is a thermoplastic hologram, used to provide both interconnection weights and beam direction. Given the updatable nature of this type of hologram, adaptivity or network learning is possible in the optical system. Two networks with fixed weights are experimentally implemented and verified, and for one of these examples the advantage of the holographic implementation with respect to the matrix-vector processor is demonstrated.

Downie, John D.↗
NASA NTRS1990

Rapid traversal of an image database using binary synthetic discriminant filters

Pattern recognition invariant to image rotations of up to 75 deg, using a single filter, has been demonstrated for binary synthetic discriminant function (BSDF) optical filters, suggesting their use in directed graph-arranged data bases which can be rapidly traversed by means of a filter-plane programmable spatial light modulator (SLM). The filter data base is arranged as a tree structure in which the root node filters are invariant to over 60 deg rotation, while the leaves are 5-deg invariant. Results are presented from experiments with BSDFs designed to recognize in-plane-rotated views of a Space Shuttle Orbiter. Using a magnetooptic SLM that is driven at 350 Hz in the filter plane, orientation identifications requiring less than 30 msec have been achieved after sequencing through only 10 BSDFs.

Reid, Max B.↗