Engineering Papers⌕ Search

Engineering topics

Downar, Thomas

Publications and source records attributed to Downar, Thomas.

At least 55 records · Page 3

VERA Benchmarking Results for Watts Bar Nuclear Plant Unit 1 Cycles 1-12

The Consortium for Advanced Simulation of Light Water Reactors, the first US DOE Energy Innovation Hub, is developing and deploying a suite of directly coupled, high-fidelity physics methods known as VERA for performing engineering analyses of operating commercial nuclear power reactors. The centerpiece of VERA is the reactor core simulator, which employs the direct coupling of a 3D neutron transport code, a two-phase sub-channel thermal-hydraulic code, and a well-known isotopic depletion and decay code. Together these tools represent the most rigorous reactor simulator available today. Recently added capabilities include the depletion, shuffling, and discharge of fuel assemblies, enabling VERA to simulate multiple fuel cycles of operation. To demonstrate this capability, VERA has been used to simulate over 18 years of operation of TVA’s Watts Bar Nuclear Unit 1, and the results of these calculations have been used to quantify its performance in an industry-grade benchmarking activity. Comparisons are made with measured critical boron concentrations, control bank reactivity worths, isothermal temperature coefficients, and in-core neutron flux distributions. These results demonstrate that the advanced tools in VERA are capable for application to practical and common industrial problems.

Godfrey, Andrew T↗

Self-Sustaining Thorium Boiling Water Reactors

The primary objectives of this project are to: Perform a pre-conceptual design of a core for an alternative to the Hitachi proposed fuel-self- sustaining RBWR-AC, to be referred to as a RBWR-Th. The use of thorium fuel is expected to assure negative void coefficient of reactivity (versus positive of the RBWR-AC) and improve reactor safety; Perform a pre-conceptual design of an alternative core to the Hitachi proposed LWR TRU transmuting RBWR-TB2, to be referred to as the RBWR-TR. In addition to improved safety, use of thorium for the fertile fuel is expected to improve the TRU transmutation effectiveness; Compare the RBWR-Th and RBWR-TR performance against that of the Hitachi RBWR core designs and sodium cooled fast reactor counterparts - the ARR and ABR; and, Perform a viability assessment of the thorium-based RBWR design concepts to be identified along with their associated fuel cycle, a technology gap analysis, and a technology development roadmap. A description of the work performed and of the results obtained is provided in this Overview Report and, in more detail, in the Attachments. The major findings of the study are summarized.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

MPACT Theory Manual Version 2.0.0

This theory manual describes the three-dimensional (3-D) whole-core, pin-resolved transport calculation methodology employed in the MPACT code. To provide sub-pin level power distributions with sufficient accuracy, MPACT employs the method of characteristics (MOC) solutions in the framework of a 3-D coarse mesh finite difference (CMFD) formulation. MPACT provides a 3D MOC solution, but also a 2D/1D solution in which the 2D planar solution is provided by MOC and the axial coupling is resolved by one-dimensional (1-D) lower order (diffusion or P3) solutions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

MPACT User's Manual (Version 2.0.0)

The MPACT (Michigan PArallel Charactistics based Transport) code is designed to perform high-fidelity light water reactor (LWR) analysis using whole-core pin-resolved neutron transport calculations on modern parallel-computing hardware. The code consists of several libraries which provide the functionality necessary to solve steady-state eigenvalue problems. Several transport capabilities are available within MPACT including both 2-D and 3-D Method of Characteristics (MOC). A three-dimensional whole core solution based on the 2D-1D solution method provides the capability for full core depletion calculations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Transient Safety Analysis of Fast Spectrum TRU Burning LWRs with Internal Blankets

The objective of this proposal was to perform a detailed transient safety analysis of the Resource-Renewable BWR (RBWR) core designs using the U.S. NRC TRACE/PARCS code system. This project involved the same joint team that has performed the RBWR design evaluation for EPRI and therefore be able to leverage that previous work. And because of their extensive experience with fast spectrum reactors and parfait core designs, ANL was also part the project team. The principal outcome of this project was the development of a state-of-the-art transient analysis capability for GEN-IV reactors based on Monte Carlo generated cross sections and the US NRC coupled code system TRACE/PARCS, and a state-of-the-art coupled code assessment of the transient safety performance of the RBWR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

VERA Core Simulator Methodology for PWR Cycle Depletion

This paper describes the methodology developed and implemented in MPACT for performing high-fidelity pressurized water reactor (PWR) multi-cycle core physics calculations. MPACT is being developed primarily for application within the Consortium for the Advanced Simulation of Light Water Reactors (CASL) as one of the main components of the VERA Core Simulator, the others being COBRA-TF and ORIGEN. The methods summarized in this paper include a methodology for performing resonance self-shielding and computing macroscopic cross sections, 2-D/1-D transport, nuclide depletion, thermal-hydraulic feedback, and other supporting methods. These methods represent a minimal set needed to simulate high-fidelity models of a realistic nuclear reactor. Results demonstrating this are presented from the simulation of a realistic model of the first cycle of Watts Bar Unit 1. The simulation, which approximates the cycle operation, is observed to be within 50 ppm boron (ppmB) reactivity for all simulated points in the cycle and approximately 15 ppmB for a consistent statepoint. The verification and validation of the PWR cycle depletion capability in MPACT is the focus of two companion papers.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Operational Reactor Depletion Analysis Capability

The milestone for the operational reactor depletion demonstrates a cycle depletion simulation of Watt's Bar Unit 1 Cycle 1. The simulation was performed using the VERA-CS components MPACT and COBRA-TF. The simulation was performed on the Titan and Eos machines at the Oak Ridge Leadership Computing Facility. The simulation results include the critical boron concentration, the pin resolved power, temperature, and fluid density distributions, and detector responses as a function of time. These results are presented and the critical boron concentration is compared with measured data. The comparison is reasonable given the modeling approximation used at this point. Several suggestions, both near and longer term, are given for areas of future work which include improving the methods, data, models, and computational performance. For those solution results which are not compared to measurement, e.g. power and temperature distributions, their behavior coincides with analysts' expectations. An important next step in the validation of VERA-CS will be the comparison of the computational results to the measured flux data. To satisfy this L1 milestone, numerous capabilities were successfully added as a part of supporting L2 and L3 milestones. These include: full core depletion, generation of a new cross section library, coupling of neutronics and thermal hydraulic feedback, and detector response modeling. In addition to the operational reactor depletion, several 2-D core parametric studies were performed to assess the new simulation capability and to develop guidelines on model approximations and discretizations. Some of the conclusions from these studies are: • The simulation of B-10 depletion in the coolant is necessary to accurately predict critical boron concentrations, • If the end of cycle state is of primary interest in the simulation, then significant approximations may be made in the cycle history. The ability to make use of this approximation without a notable loss in accuracy will considerably accelerate multi-cycle analysis, • The new 47-group cross section library with a transport correction of the P 0 scattering can provide solutions very efficiently and which are nearly as accurate as solutions generated with explicit P 2 scattering, and • Simplified modeling of the equilibrium xenon concentration is well predicted by the existing depletion solver, and only in certain circumstances (e.g. large and "instantaneous" changes to rod position or T/H conditions) would an explicit physical model need to be included. Overall the milestone is considered a success as the objectives were met and several new and important results were produced from this work. The results and conclusions of this milestone will continue to guide future work and become the basis for addressing the CASL Challenge Problems.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Multi-Scale Multi-physics Methods Development for the Calculation of Hot-Spots in the NGNP

Radioactive gaseous fission products are released out of the fuel element at a significantly higher rate when the fuel temperature exceeds 1600°C in high-temperature gas-cooled reactors (HTGRs). Therefore, it is of paramount importance to accurately predict the peak fuel temperature during all operational and design-basis accident conditions. The current methods used to predict the peak fuel temperature in HTGRs, such as the Next-Generation Nuclear Plant (NGNP), estimate the average fuel temperature in a computational mesh modeling hundreds of fuel pebbles or a fuel assembly in a pebble-bed reactor (PBR) or prismatic block type reactor (PMR), respectively. Experiments conducted in operating HTGRs indicate considerable uncertainty in the current methods and correlations used to predict actual temperatures. The objective of this project is to improve the accuracy in the prediction of local "hot" spots by developing multi-scale, multi-physics methods and implementing them within the framework of established codes used for NGNP analysis.The multi-scale approach which this project will implement begins with defining suitable scales for a physical and mathematical model and then deriving and applying the appropriate boundary conditions between scales. The macro scale is the greatest length that describes the entire reactor, whereas the meso scale models only a fuel block in a prismatic reactor and ten to hundreds of pebbles in a pebble bed reactor. The smallest scale is the micro scale--the level of a fuel kernel of the pebble in a PBR and fuel compact in a PMR--which needs to be resolved in order to calculate the peak temperature in a fuel kernel.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Two-Step Approach to Uncertainty Quantification of Core Simulators

For the multiple sources of error introduced into the standard computational regime for simulating reactor cores, rigorous uncertainty analysis methods are available primarily to quantify the effects of cross section uncertainties. Two methods for propagating cross section uncertainties through core simulators are the XSUSA statistical approach and the “two-step” method. The XSUSA approach, which is based on the SUSA code package, is fundamentally a stochastic sampling method. Alternatively, the two-step method utilizes generalized perturbation theory in the first step and stochastic sampling in the second step. The consistency of these two methods in quantifying uncertainties in the multiplication factor and in the core power distribution was examined in the framework of phase I-3 of the OECD Uncertainty Analysis in Modeling benchmark. With the Three Mile Island Unit 1 core as a base model for analysis, the XSUSA and two-step methods were applied with certain limitations, and the results were compared to those produced by other stochastic sampling-based codes. Based on the uncertainty analysis results, conclusions were drawn as to the method that is currently more viable for computing uncertainties in burnup and transient calculations.

Yankov, Artem↗

A Generalized Adjoint Approach for Quantifying Reflector Assembly Discontinuity Factor Uncertainties

Sensitivity-based uncertainty analysis of assembly discontinuity factors (ADFs) can be readily performed using adjoint methods for infinite lattice models. However, there is currently no adjoint-based methodology to obtain uncertainties for ADFs along an interface between a fuel and reflector region. To accommodate leakage effects in a reflector region, a 1D approximation is usually made in order to obtain the homogeneous interface flux required to calculate the ADF. Within this 1D framework an adjoint-based method is proposed that is capable of efficiently calculating ADF uncertainties. In the proposed method the sandwich rule is utilized to relate the covariance of the input parameters of 1D diffusion theory in the reflector region to the covariance of the interface ADFs. The input parameters covariance matrix can be readily obtained using sampling-based codes such as XSUSA or adjoint-based codes such as TSUNAMI. The sensitivity matrix is constructed using a fixed-source adjoint approach for inputs characterizing the reflector region. An analytic approach is then used to determine the sensitivity of the ADFs to fuel parameters using the neutron balance equation. A stochastic approach is used to validate the proposed adjoint-based method.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗