Engineering Papers⌕ Search

Engineering topics

Doss, Forrest William

Publications and source records attributed to Doss, Forrest William.

At least 19 records

A Simple Non-Planckian Radiation Source for ICF and HED Simulations (Rev.1)

The purpose of this paper is to present a simple way to build frequency dependent spectral (FDS) sources for use in inertial confinement fusion and high energy density physics simulations. This process takes an arbitrary temperature history and converts it into a radiation source with both Planckian and non-Planckian components, the latter of which is to describe high energy photon energies emitted by gold hohlraums. This method is then used to generate spectral energy sources for use in inertial confinement fusion (ICF) and high energy density (HED) simulations which are compared to integrated laser simulations along with experimental measurements.

07 ISOTOPE AND RADIATION SOURCES↗

A method for examining ensemble averaging forms during the transition to turbulence in HED systems for application to RANS models

This paper discusses a strategy to initialize a two-dimensional (2D) Reynolds-averaged Navier–Stokes model [LANL's Besnard–Harlow–Rauenzahn (BHR) model] in order to describe an unsteady transitional Richtmyer–Meshkov (RM)-induced flow observed in on-going high-energy-density ensemble experiments performed on the OMEGA-EP facility. The experiments consist of a nominal single-mode perturbation (initial amplitude a 0 ≈ 10 and wavelength $λ$ = 100μm) with target-to-target variations in the surface roughness subjected to the RM instability with delayed Rayleigh–Taylor in a heavy-to-light configuration. Our strategy leverages high-resolution three-dimensional (3D) implicit large eddy simulations (ILES) simulations to initialize BHR-relevant parameters and subsequently validate the 2D BHR results against the 3D ILES simulations. A suite of five 3D ILES simulations corresponding to five experimental target profiles is undertaken to generate an ensemble dataset. Using ensemble averages from the 3D simulations to initialize the turbulent kinetic energy in the BHR model ( K 0 ) demonstrates the ability of the model to predict the time evolution of the interface as well as the density-specific-volume covariance, b . To quantify the sensitivity of the BHR results to the choice of K 0 and the initial turbulent length scale, S 0 , we execute a parameter sweep spanning four orders of magnitude for both S 0 and K 0 , generating a parameter space consisting of 26 simulations. The Pearson's correlation coefficient is used as a measure of discrepancy between the 2D BHR and 3D ILES simulations and reveals that the ranges 8≲S 0 ≲20 μm and 10 9 ≲K 0 ≲10 10 cm 2 /s 2 produce predictions that agree best with the 3D ILES results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Density variance dynamics in disparate shock tubes

This report discusses two experiments which investigate thin layer, heavy curtain fragmentation from the perspective of a Reynolds-Averaged mix model, in drastically disparate experimental regimes. The first, the centimeter/millisecond-scale “Horizontal Shock Tube” (HST) is a compressed-gas piston-driven shock tube experiment. The second, the “Multishock thin layer” (Mshock) experiment performed at the National Ignition Facility, is a micrometer/nanosecond-scale laser-driven shock tube experiment. Both are situations in which a heavy plane layer (a ‘curtain’) is initially suspended in a lighter medium. After being shocked from at least one side, the layer translates while its interfaces evolve due to the excitation of the Richtmyer-Meshkov instability at its surfaces. The evolution of density variance, which initially exists only on the surface of the layer, as it comes to encompass the whole layer interior is used as a description of layer fragmentation and dissolution. These experiments have each been simulated in the Los Alamos National Laboratory multi-physics code xRAGE, which includes fundamental hydrodynamics, extended plasma physics and radiation effects which are important to drive the high-energy density experiment, and the Besnard-Harlow-Rauenzahn (BHR) turbulence model. In each, the principal diagnostic for comparison is an experimental metric for the density (co)variance, b, which tracks the moments of the density field at the curtain interfaces and body. Due to experimental constraints in different regimes (i.e. optical diagnostics can be deployed on conventional shock tubes, while the plasma shock tubes must be imaged by x-rays; interfaces can be imposed to specification on laser-driven experiments, which are stored in the solid phase, while conventional experiments have imperfect control of the flow fields which separate the layer, etc.) the experiments are not designed to be perfect scaled cognates of one another. However, despite the separation of six orders of magnitude of scaling in time, and four in space, we are able to demonstrate that the same turbulence model, operating in the same fashion in the same computer code, is able to reproduce results in each experiment, by tracking evolution due to common relevant physics. Additionally, we will present preliminary work toward density variance comparisons in a single-interface Richtmyer-Meshkov configuration, the conventional fluid “Vertical Shock Tube” (VST) experiment, and the Modal Initial Conditions (ModCons) campaign fielded at the OMEGA-EP laser facility.

42 ENGINEERING↗

Vorticity screening by dense layers

We investigate variable density layers in the presence of vortices, by analogy to line charges in the presence of a dielectric slab. We adapt solutions for dielectric layers from the literature to the variable density fluid case, obtaining exact hypergeometric expressions for flow velocities induced everywhere by a vortex in the vicinity of a finite-thickness slab of different densities. The dimensionless Atwood number, which appears naturally in other variable density phenomena, such as the Rayleigh–Taylor instability, reappears here as the natural ordering parameter for the influence of the slab, which acts primarily to screen the influence of vorticity across the slab to a lower effective circulation. The solution takes the form of scaling correction factors that might be applied to computational models or evaluated directly. Extensions, where vorticity is localized within the dense layer itself and amplified outside of it, are considered, as well as some speculative applications such as inertial confinement fusion capsule designs.

42 ENGINEERING↗

Advection versus diffusion in Richtmyer-Meshkov mixing

The Richtmyer-Meshkov (RM) instability is one of the most severe degradation mechanisms for inertial confinement fusion (ICF), and mitigating it has been a priority for the global ICF effort. In this Letter, the instability's ability to atomically mix is linked to its background decay of residual turbulent energy. Here, we show how recently derived inequalities from the mathematical theory of PDEs constrain the evolution. A model RM process at leading order may diffusively mix or retain imprints of its initial structures indefinitely, depending on initial conditions, and there exists a theoretical range of zero-mixing for certain values of parameters. The results may apply to other systems resembling scalar transport in decaying turbulence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A New Data Analysis Technique for Determining Mix Parameters from HED Experiments

In designing, analyzing, and understanding high-energy-density (HED) physics experiments, including inertial confinement fusion (ICF) experiments, we must contend with the extension of hydrodynamics to new regimes where additional physics, such as radiation transport and nuclear reactions, become important and coupled to the dynamics. Our most sophisticated models and understanding are based in classical, low-energy physics, since that is what we have the easiest access to creating and diagnosing. To assess our extrapolation of that understanding to the HED regime will require comparable precision in experiments and measurements. This is particularly the important in the case of hydrodynamic turbulence — most experiments are designed with one or two dimensions of symmetry, but at small scales hydrodynamics is generically observed to crumple into a fine structure of apparently random, three-dimensional eddies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reducing Direct Drive Preheat with Dopants

Preheat in laser-driven experiments can have negative impacts on inertial confinement fusion (ICF) and hydrodynamic experiments. While many groups employ the use of dopants to reduce or block preheat, direct quantification has not previously been explored. We developed a planar platform and a series of ablator targets to measure the electron and x-ray spectra generated by laser-plasma interactions with a direct drive using OMEGA-60. By comparing both thin ablators (75 μm) and thick ablators (270 μm) that were either pure CH, 3% Si doped or 3% I doped, we were able to measure differences in electron and x-ray spectra. In addition, we observed the preheat growth of tracer layers and observed reductions in the growth with different materials. We find that iodine or a thin gold layer is the best at tamping the direct-drive preheat at OMEGA, but that the growth is still significant.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Extracting a mixing parameter from 2D radiographic imaging of variable-density turbulent flow

We extract a suitably averaged fluctuating density from the two-dimensional radiographic image of a flow. The X-ray attenuation is given by the Beer–Lambert law which exponentially damps the incident beam intensity by a factor proportional to the density, opacity and thickness of the target. By making reasonable assumptions for the mean density, opacity and effective thickness of the target flow, we estimate the density fluctuation contribution to the attenuation. The extracted density fluctuations averaged across the thickness of the flow in the direction of the beam may be used to form the density–specific-volume correlation $b$. In a statistical description of variable-density turbulence, $b$ quantifies the degree of mixedness. The ability to extract a measure of mixedness from experimental data would be a powerful tool that could be used in the validation of mix models. The scheme proposed is tested for DNS data computed for variable density buoyancy-driven mixing. We quantify the deficits in the extracted value of $b$ due to target thickness, Atwood number and modeled signal noise. This analysis justifies using the proposed scheme to infer the mix parameter from thin targets at moderate to low Atwood numbers. Furthermore, to illustrate how the scheme might be used in a practical problem, we demonstrate its application to a radiographic image of counter-shear flow obtained from experiments at the National Ignition Facility.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shock-driven hydrodynamic instability of a sinusoidally perturbed, high-Atwood number, oblique interface

A shock incident on an interface will cause any initial perturbations on that interface to grow. When the shock front is parallel to the interface, the perturbations grow due to the Richtmyer-Meshkov (RM) process. When there is some tilt between the shock front and the interface, shear flow will result across the postshock interface. Recent experiments on the OMEGA EP laser have studied the hydrodynamic instability growth which results from a supported shock interacting with a sinusoidally perturbed, oblique interface. The observed instability growth was dominated by Richtmyer-Meshkov at early times but became Kelvin-Helmholtz (KH)-like at late times. Previously, this instability growth was described using an analytic model for the deposition of baroclinic vorticity on the interface by a shock combined with a discrete vortex model. Here, we utilize the same baroclinic vorticity deposition model in conjunction with a desingularized, periodic Birkhoff-Rott equation to model instability evolution. The Birkhoff-Rott equation takes into account the vorticity distribution along the interface, whereas the discrete vortex model assumed that all vorticity over each wavelength of the perturbation is confined to a point. We compare the new model to xRAGE simulations and experiments. In conclusion, the model is found to overpredict both the instability growth and shear across the interface by about a factor of two, but correctly predicts that the growth is RM-like at early times and KH-like at late times.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗