Engineering topics

Dorney, D. J.

Publications and source records attributed to Dorney, D. J..

5 records

NASA NTRS2012

Radiosondes for Characterizing the Martian Atmosphere

The National Weather Service (NWS) releases approximately 75,000 radiosondes each year to measure pressure, altitude, temperature, relative humidity, wind and cosmic radiation [1]. The data obtained from these measurements have led to a more thorough understanding of the Earth s lower atmosphere. On the contrary, there have been only six fully successful landings on Mars, and there is much less known about the variations in winds, density, etc., in the mid-regions of the Martian atmosphere (see Fig. 1). This data is vital to understanding Martian weather and the development of Mars landers for larger payloads [2,3,4]. Mars has too much atmosphere to land like is done on the moon, and too little atmosphere to land like is done on Earth. It is suggested that radiosondes could be added as secondary payloads on Mars missions and used to map physical properties in the different regions of the Martian atmosphere.

Schumacher, D. M.↗

NASA NTRS2012

Fission Systems for Mars Exploration

Fission systems are used extensively on earth, and 34 such systems have flown in space. The energy density of fission is over 10 million times that of chemical reactions, giving fission the potential to eliminate energy density constraints for many space missions. Potential safety and operational concerns with fission systems are well understood, and strategies exist for affordably developing such systems. By enabling a power-rich environment and highly efficient propulsion, fission systems could enable affordable, sustainable exploration of Mars.

Houts, Michael G.↗

NASA NTRS2003

Development Status of the Phantom Code for Turbomachinery

Contents include the following: Motivation. Code details. Test cases: aardvark (2D), phantom (3D). Algorithm basics. New feature I, II, and III. UTRC LSRR 1 - 1/2 stage turbine. Supersonic turbine. UTRC LSRR single-stage turbine. LOX elbow duct. Computational grid. High-pressure fuel pump inducer. Development plan. Summary. Appendix - Background.

Dorney, D. J.↗

NASA NTRS2003

Calculation of Turbine Axial Thrust by Coupled CFD Simulations of the Main Flow Path and Secondary Cavity Flow in an SLI LOX Turbine

Each single reusable Space Launch Initiative (SLI) booster rocket is an engine operating at a record vacuum thrust level of over 730,000 Ibf using LOX and LH2. This thrust is more than 10% greater than that of the Delta IV rocket, resulting in relatively large LOX and LH2 turbopumps. Since the SLI rocket employs a staged combustion cycle the level of pressure is very high (thousands of psia). This high pressure creates many engineering challenges, including the balancing of axial-forces on the turbopumps. One of the main parameters in the calculation of the axial force is the cavity pressure upstream of the turbine disk. The flow in this cavity is very complex. The lack of understanding of this flow environment hinders the accurate prediction of axial thrust. In order to narrow down the uncertainty band around the actual turbine axial force, a coupled, unsteady computational methodology has been developed to simulate the interaction between the turbine main flow path and the cavity flow. The CORSAIR solver, an unsteady three- dimensional Navier-Stokes code for turbomachinery applications, was used to solve for both the main and the secondary flow fields. Turbine axial thrust values are presented in conjunction with the CFD simulation, together with several considerations regarding the turbine instrumentation for axial thrust estimations during test.

Dorney, D. J.↗

NASA NTRS2002

Full and Partial Admission Performance of the Simplex Turbine

The turbines used in rocket-engine applications are often partial-admission turbines, meaning that the flow enters the rotor over only a portion of the annulus. These turbines have been traditionally analyzed, however, assuming full-admission characteristics. This assumption enables the simulation of only a portion of the 360-degree annulus, with periodic boundary conditions applied in the circumferential direction. While this traditional approach to the simulating the flow in partial-admission turbines significantly reduces the computational requirements, the accuracy of the solutions has rarely been evaluated. In the current investigation, both full- and partial-admission three dimensional unsteady Navier-Stokes simulations were performed for a partial-admission turbine designed and tested at NASA Marshall Space Flight Center. The results indicate that the partial-admission nature of the turbine must be included in simulations to properly predict the performance and flow unsteadiness of the turbine.

Dorney, D. J.↗