Engineering Papers⌕ Search

Engineering topics

Dong, Yanhao

Publications and source records attributed to Dong, Yanhao.

At least 19 records

Integrated rocksalt–polyanion cathodes with excess lithium and stabilized cycling

Co- and Ni-free disordered rocksalt cathodes utilize oxygen redox to increase the energy density of lithium-ion batteries, but it is challenging to achieve good cycle life at high voltages >4.5 V (versus Li/Li + ). Here, in this study, we report a family of Li-excess Mn-rich cathodes that integrates rocksalt- and polyanion-type structures. Following design rules for cation filling and ordering, we demonstrate the bulk incorporation of polyanion groups into the rocksalt lattice. This integration bridges the two primary families of lithium-ion battery cathodes—layered/spinel and phosphate oxides—dramatically enhancing the cycling stability of disordered rocksalt cathodes with 4.8 V upper cut-off voltage. The cathode exhibits high gravimetric energy densities above 1,100 Wh kg -1 and >70% retention over 100 cycles. This study opens up a broad compositional space for developing battery cathodes using earth-abundant elements such as Mn and Fe.

36 MATERIALS SCIENCE↗

Improving Proton Conductivity by Navigating Proton Trapping in High Scandium-Doped Barium Zirconate Electrolytes

Proton-conducting oxides are used in intermediate-temperature (300 °C < T < 700 °C) applications of fuel cells, electrolyzers, membrane reactors, hydrogen pumps, and sensors. The proton conductivity of doped ABO 3 perovskites is partly dependent on the proton concentration and hence on the level of material hydration. However, how the material hydration ability is affected by differences in doping is not fully understood. Here, we show the prospect of proton trapping and detrapping that influences material hydration and dehydration. The proton-trapping influence is significant for Sc-doped BaZrO 3 compared to Y-doped BaZrO 3 . Here, our work offers a perspective to understand how defect interaction/associations influence the hydration ability of proton-conducting oxides. Furthermore, positron annihilation lifetime spectroscopy was revealed to be a valuable technique for studying the proton-trapping phenomena and the defect chemistry of dense proton conductors. Density functional theory calculations also showed that a high hydration level in Sc-doped BaZrO 3 boosts proton migration. In contrast, the effect of boosting the proton migration due to increased hydration is limited for Y-doped BaZrO 3 . This effect, in turn, might explain the trend of conductivity with dopant concentration in doped BaZrO 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxygen redox and instability in energy ceramics

Energy ceramics, including solid electrolytes and catalysts for high-temperature fuel/electrolysis cells and oxide cathodes for batteries, often experience harsh chemical and electrochemical conditions. Practical and new applications require that these devices are operated under ever more extreme redox conditions for higher energy density and power density. This challenges the stability of the energy ceramic materials and calls for a better understanding of the degradation mechanisms and innovative strategies for degradation mitigation. Here we present our analysis and perspectives on degradation phenomena in three categories of electrochemical devices of practical interest, including solid oxide fuel/electrolysis cells, protonic ceramic fuel/electrolysis cells, and lithium-ion batteries. We also discuss the stability/degradation of the key ceramic components from the view of oxygen redox and instability arising from anodic bias, transport limitation, and coupled electro-chemo-mechanics at the virtual and physical interfaces. We hope these perspectives provide design principles for electroceramic chemistry, microstructure, and processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Unbalanced Battle in Excellence: Revealing Effect of Ni/Co Occupancy on Water Splitting and Oxygen Reduction Reactions in Triple–Conducting Oxides for Protonic Ceramic Electrochemical Cells

Porous electrodes that conduct electrons, protons, and oxygen ions with dramatically expanded catalytic active sites can replace conventional electrodes with sluggish kinetics in protonic ceramic electrochemical cells. In this work, a strategy is utilized to promote triple conduction by facilitating proton conduction in praseodymium cobaltite perovskite through engineering non-equivalent B-site Ni/Co occupancy. Surface infrared spectroscopy is used to study the dehydration behavior, which proves the existence of protons in the perovskite lattice. The proton mobility and proton stability are investigated by hydrogen/deuterium (H/D) isotope exchange and temperature-programmed desorption. It is observed that the increased nickel replacement on the B-site has a positive impact on proton defect stability, catalytic activity, and electrochemical performance. This doping strategy is demonstrated to be a promising pathway to increase catalytic activity toward the oxygen reduction and water splitting reactions. The chosen PrNi 0.7 Co 0.3 O 3–δ oxygen electrode demonstrates excellent full-cell performance with high electrolysis current density of –1.48 A cm –2 at 1.3 V and a peak fuel-cell power density of 0.95 W cm –2 at 600 °C and also enables lower-temperature operations down to 350 °C, and superior long-term durability.

08 HYDROGEN↗

Revitalizing interface in protonic ceramic cells by acid etch

Protonic ceramic electrochemical cells hold the promise to be operated at intermediate temperatures below 600 °C. Although the high proton conductivity of the bulk electrolyte has been demonstrated, it cannot be fully utilized in electrochemical full cells due to unknown causes. A practical solution is thus urgently needed. Here we showed that it comes from poor contacts between the low-temperature processed oxygen electrode-electrolyte interface. We demonstrated that a simple acid treatment can effectively rejuvenate the high-temperature annealed electrolyte surface, resulting in reactive bonding between the oxygen electrode and the electrolyte and improved electrochemical performance and stability. This enables exceptional protonic ceramic fuel-cell performance down to 350 °C, with peak power densities of 1.6 W cm -2 at 600 °C, 650 mW cm -2 at 450 °C, and 300 mW cm -2 at 350 °C, as well as stable electrolysis operations at large current densities above 3.9 A cm -2 under 1.4 V applied voltage at 600 °C. Furthermore, our work highlights the critical role of interfacial engineering in ceramic electrochemical devices and offers new understanding and practices towards sustainable energy infrastructure.

08 HYDROGEN↗

Enhanced mobility of cations and anions in the redox state: The polaronium mechanism

Hugely enhanced slow-ion diffusivity has been widely observed under extreme redox conditions and for unclear reasons. Aided by first-principles calculations on model systems of ZrO 2 , CeO 2 , BaTiO 3 and Li 4/3 Mn 2/3 O 2 , here we successfully explained the intriguing phenomenon by a polaronium mechanism. We found a polaronium, defined as a transitory complex of a polaronic electron or hole and a migrating counterion, becomes highly mobile when the counterion comes from a d 0 or f 0 cation (e.g., Zr 4+ , Ti 4+ and Ce 4 ) or a p 6 anion (e.g., O 2- ) in the host compound. Upon a redox reaction, the complex attains a d 1 /f 1 or p 5 configuration, which spontaneously forms because it is favored by an electron-phonon interaction (manifest as the Jahn-Teller effect in high symmetry systems) that enables local relaxation and lowers the system energy. Here our calculations found such interaction reaching its peak at the saddle point where the local environment is softest, so soft that it allows a reorientation of the anisotropic d/f/p orbital to minimize the electron repulsion locally. Since the complex may dissolve after a successful ion-migration event, the redox electron/hole can be recycled to form another free-radical-like polaronium elsewhere, thereby enhancing ion migration repeatedly. The proposed polaronium mechanism, which also operates in ceramics doped with mixed-valence cations, is most relevant under dynamic and extreme thermal/field/irradiation conditions where extra electrons/holes are abundantly generated by non-equilibrium redox reactions. For such operations, some with emerging applications, our diffusion-enhancing mechanism may provide new theoretical insight to help understand their material/microstructure stability and performance.

36 MATERIALS SCIENCE↗

Electrochemically Engineered, Highly Energy-Efficient Conversion of Ethane to Ethylene and Hydrogen below 550 °C in a Protonic Ceramic Electrochemical Cell

Ethylene is one of the largest building blocks in the petrochemical industry, mainly produced by steam cracking of ethane derived from naphtha or shale gas at high temperatures (>800 °C). Despite its technical maturity and economic competitiveness, the thermal steam cracking of ethane is highly energy-intensive. In this work, an electrochemically engineered direct conversion process of ethane to produce hydrogen and ethylene using a planar protonic ceramic membrane reactor with a bi-functional three-dimensional catalytic electrode is reported, with a single-pass ethane conversion of 40% and ethylene yield of 26.7% at 550 °C. Compared with the industrial ethane steam cracking, this method saves process energy input by 45.1% and improves process energy efficiency by 50.6%, based on comprehensive process simulation using Aspen Plus software. Further, steam electrolysis treatment under the solid oxide electrolysis cell mode can regenerate the system’s catalytic performance and significantly alleviate catalytic degradation by 74%, demonstrating high techno-economic viability.

bi-functional electrode↗

Thermally Aged Li–Mn–O Cathode with Stabilized Hybrid Cation and Anion Redox

Though low-cost and environmentally friendly, Li–Mn–O cathodes suffer from low energy density. Although synthesized Li 4 Mn 5 O 12 -like overlithiated spinel cathode with reversible hybrid anion- and cation-redox (HACR) activities has a high initial capacity, it degrades rapidly due to oxygen loss and side-reaction-induced electrolyte decomposition. In this study, we develop a two-step heat treatment to promote local decomposition as Li 4 Mn 5 O 12 → 2LiMn 2 O 4 + Li 2 MnO 3 + 1/2 O 2 ↑, which releases near-surface reactive oxygen that is harmful to cycling stability. The produced nanocomposite delivers a high discharge capacity of 225 mAh/g and energy density of over 700 Wh/kg at active-material level at a current density of 100 mA/g between 1.8 to 4.7 V. Benefiting from suppressed oxygen loss and side reactions, 80% capacity retention is achieved after 214 cycles in half cells. With industrially acceptable electrolyte amount (6 g/Ah), full cells paired with Li 4 Ti 5 O 12 anode have a good retention over 100 cycles.

25 ENERGY STORAGE↗

Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries

Engineered polycrystalline electrodes are critical to the cycling stability and safety of lithium-ion batteries, yet it is challenging to construct high-quality coatings at both the primary- and secondary-particle levels. Here, we present a room-temperature synthesis route to achieve full surface coverage of secondary particles and facile infusion into grain boundaries, thus offering a complete “coating-plus-infusion” strategy. Cobalt boride metallic glass is successfully applied to Ni-rich layered cathode LiNi 0.8 Co 0.1 Mn 0.1 O 2 . Here, it dramatically improves the rate capability and cycling stability, including under high-discharge-rate and elevated-temperature conditions and in pouch full cells. The superior performance originates from simultaneous suppression of microstructural degradation of intergranular cracking and side reactions with electrolyte. Atomistic simulations identified the critical role of strong selective interfacial bonding, which offers not only a large chemical driving force to ensure uniform reactive wetting and facile infusion but also lowered the surface/interface oxygen activity, contributing to the exceptional mechanical and electrochemical stabilities of the infused electrode.

25 ENERGY STORAGE↗

Chemical and structural origin of hole states in yttria-stabilized zirconia

Yttria-stabilized zirconia (YSZ) has important electrochemical applications as a fast oxygen ion conductor and is the state-of-the-art electrolyte material for solid oxide fuel/electrolyzer cells. While much attention has been paid to the fast oxygen ion conduction, the electronic conductivity and especially hole carriers are not well understood, yet essential for the electrochemical stability, conduction kinetics and microstructural evolution in YSZ. The present work uses first-principles calculations to illustrate the chemical nature and local structural features of hole states in oxidized YSZ. Three types of hole states have been identified, including delocalized hole states on normal oxygen ions, localized hole states on special oxygen ions with extreme local structures, and peroxide-like groups. In conclusion, the implications on various experimental observations are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultra‐Uniform Nanocrystalline Materials via Two‐Step Sintering

Abstract Nanocrystalline materials with superior properties are of great interest. Much is discussed about obtaining nanograins, but little is known about maintaining grain‐size uniformity that is critical for reliability. An especially intriguing question is whether it is possible to achieve a size distribution narrower than what Hillert theoretically predicted for normal grain growth, a possibility suggested—for growth with a higher growth exponent—by the generalized mean‐field theory of Lifshitz, Slyozov, Wagner (LSW), and Hillert but never realized in practice. Following a rationally designed two‐step sintering route, it has been made possible in bulk materials by taking advantage of the large growth exponent in the intermediate sintering stage to form a uniform microstructure despite residual porosity, and freezing the grain growth thereafter while continuing densification to reach full density. The bulk dense Al 2 O 3 ceramic thus obtained has an average grain size of 34 nm and a size distribution much narrower than Hillert's prediction. Bulk Al 2 O 3 with a grain‐size distribution narrower than the particle‐size distribution of starting powders is also demonstrated, as are highly uniform bulk engineering metals (refractory Mo and W‐Re alloy) and complex functional ceramics (BaTiO 3 ‐based alloys with superior dielectric strength and energy capacity).

Dong, Yanhao↗

Stabilized Co-Free Li-Rich Oxide Cathode Particles with An Artificial Surface Prereconstruction

Li-rich metal oxide (LXMO) cathodes have attracted intense interest for rechargeable batteries because of their high capacity above 250 mAh g –1 . However, the side effects of hybrid anion and cation redox (HACR) reactions, such as oxygen release and phase collapse that result from global oxygen migration (GOM), have prohibited the commercialization of LXMO. GOM not only destabilizes the oxygen sublattice in cycling, aggravating the well-known voltage fading, but also intensifies electrolyte decomposition and Mn dissolution, causing severe full-cell performance degradation. In this study, an artificial surface prereconstruction (ASR) for Li 1.2 Mn 0.6 Ni 0.2 O 2 particles with a molten-molybdate leaching is conducted, which creates a crystal-dense anion-redox-free LiMn 1.5 Ni 0.5 O 4 shell that completely encloses the LXMO lattice (ASR-LXMO). Differential electrochemical mass spectroscopy and soft X-ray absorption spectroscopy analyses demonstrate that GOM is shut down in cycling, which not only stabilizes HACR in ASR-LXMO, but also mitigates the electrolyte decomposition and Mn dissolution. ASR-LXMO displays greatly stabilized cycling performance as it retains 237.4 mAh g –1 with an average discharge voltage of 3.30 V after 200 cycles. More crucially, while the pristine LXMO cycling cannot survive 90 cycles in a pouch full-cell matched with a commercial graphite anode and lean (2 g A –1 h –1 ) electrolyte, ASR-LXMO shows high capacity retention of 76% after 125 cycles in full-cell cycling.

25 ENERGY STORAGE↗

Lithium Manganese Spinel Cathodes for Lithium-Ion Batteries

Spinel LiMn 2 O 4 , whose electrochemical activity was first reported by Professor John B. Goodenough’s group at Oxford in 1983, is an important cathode material for lithium-ion batteries, which attracts continuous academic and industrial interests. It is cheap and environmentally friendly, and has excellent rate performance with 3-dimensional (3D) Li + diffusion channels. However, it suffers from severe degradations, especially under extreme voltages and during high-temperature operations. In this review, the current understanding and future trends of the spinel cathode and its derivatives with cubic lattice symmetry (LiNi 0.5 Mn 1.5 O 4 that shows high-voltage stability, and Li-rich spinels that show reversible hybrid anion- and cation-redox activities) shall be discussed. Special attention is given to the degradation mechanisms, further development of spinel cathodes, and concepts of utilizing the cubic spinel structure to stabilize high-capacity layered cathodes and as robust framework for high-rate electrodes. Lastly, “Good spinel” surface phases like LiNi 0.5 Mn 1.5 O 4 are distinguished from “bad spinel” surface phases like Mn 3 O 4 .

25 ENERGY STORAGE↗

Gradient Li-rich oxide cathode particles immunized against oxygen release by a molten salt treatment

Lithium-rich transition metal oxide (Li 1+X M 1–X O 2 ) cathodes have high energy density above 900 Wh kg –1 due to hybrid anion- and cation-redox (HACR) contributions, but critical issues such as oxygen release and voltage decay during cycling have prevented their application for years. Here we show that a molten molybdate-assisted LiO extraction at 700 °C creates lattice-coherent but depth (r)-dependent Li 1+X(r) M 1–X(r) O 2 particles with a Li-rich (X ≈ 0.2) interior, a Li-poor (X ≈ –0.05) surface and a continuous gradient in between. The gradient Li-rich single crystals eliminate the oxygen release to the electrolyte and, importantly, still allow stable oxygen redox contributions within. Here, both the metal valence states and the crystal structure are well maintained during cycling. The gradient HACR cathode displays a specific density of 843 Wh kg –1 after 200 cycles at 0.2C and 808 Wh kg –1 after 100 cycles at 1C, with very little oxygen release and consumption of electrolyte. This high-temperature immunization treatment can be generalized to leach other elements to avoid unexpected surface reactions in batteries.

36 MATERIALS SCIENCE↗