Engineering topics

Dong, X.

Publications and source records attributed to Dong, X..

105 records · Page 6

DOE OSTI2024

Study of η′ → π+π−l+l− decays at BESIII

Abstract With a sample of (10087±44)×10 6 J/ψevents accumulated with the BESIII detector, we analyze the decaysη′→ π + π − l + l − (l=e, μ) via the processJ/ψ → γη′. The branching fractions are measured to be$$ \mathcal{B} $$ B (η′→ π + π − e + e − ) = (2.45±0.02(stat.)±0.08(syst.))×10 −3 and$$ \mathcal{B} $$ B (η′→ π + π − μ + μ − ) = (2.16±0.12(stat.)±0.06(syst.))×10 −5 , and the ratio is$$ \frac{\mathcal{B}\left({\eta}^{\prime}\to {\pi}^{+}{\pi}^{-}{e}^{+}{e}^{-}\right)}{\mathcal{B}\left({\eta}^{\prime}\to {\pi}^{+}{\pi}^{-}{\mu}^{+}{\mu}^{-}\right)}=113.4\pm 0.9\left(\textrm{stat}.\right)\pm 3.7\left(\textrm{syst}.\right) $$ B η ′ → π + π − e + e − B η ′ → π + π − μ + μ − = 113.4 ± 0.9 stat . ± 3.7 syst . . In addition, by combining theη′ →π + π − e + e − andη′ →π + π − μ + μ − decays, the slope parameter of the electromagnetic transition form factor is measured to beb η′ = 1.30 ± 0.19 (GeV/c 2 ) −2 , which is consistent with previous measurements from BESIII and theoretical predictions from the VMD model. The asymmetry in the angle between theπ + π − andl + l − decay planes, which has the potential to reveal theCP-violation originating from an unconventional electric dipole transition, is also investigated. The asymmetry parameters are determined to be$$ {\mathcal{A}}_{CP}\left({\eta}^{\prime}\to {\pi}^{+}{\pi}^{-}{e}^{+}{e}^{-}\right)=\left(-0.21\pm 0.73\left(\textrm{stat}.\right)\pm 0.01\left(\textrm{syst}.\right)\right)\% $$ A CP η ′ → π + π − e + e − = − 0.21 ± 0.73 stat . ± 0.01 syst . % and$$ {\mathcal{A}}_{CP}\left({\eta}^{\prime}\to {\pi}^{+}{\pi}^{-}{\mu}^{+}{\mu}^{-}\right)=\left(0.62\pm 4.71\left(\textrm{stat}.\right)\pm 0.08\left(\textrm{syst}.\right)\right)\% $$ A CP η ′ → π + π − μ + μ − = 0.62 ± 4.71 stat . ± 0.08 syst . % , implying that no evidence ofCP-violation is observed at the present statistics. Finally, an axion-like particle is searched for via the decayη′ →π + π − a, a→e + e − , and upper limits of the branching fractions are presented for the mass assumptions of the axion-like particle in the range of 0−500 MeV/c 2 .

Physics↗

DOE OSTI2024

Measurement of the cross sections of $$ {e}^{+}{e}^{-}\to {K}^{-}{\overline{\Xi}}^{+}\Lambda /{\Sigma}^0 $$ at center-of-mass energies between 3.510 and 4.914 GeV

Abstract Usinge + e − collision data collected with the BESIII detector at the BEPCII collider at center-of-mass energies between 3.510 and 4.914 GeV, corresponding to an integrated luminosity of 25 fb −1 , we measure the Born cross sections for the process$$ {e}^{+}{e}^{-}\to {K}^{-}{\overline{\Xi}}^{+}\Lambda /{\Sigma}^0 $$ e + e − → K − Ξ ¯ + Λ / Σ 0 at thirty-five energy points with a partial-reconstruction strategy. By fitting the dressed cross sections of$$ {e}^{+}{e}^{-}\to {K}^{-}{\overline{\Xi}}^{+}\Lambda /{\Sigma}^0 $$ e + e − → K − Ξ ¯ + Λ / Σ 0 , evidence for$$ \psi (4160)\to {K}^{-}{\overline{\Xi}}^{+}\Lambda $$ ψ 4160 → K − Ξ ¯ + Λ is found for the first time with a significance of 4.4σ, including systematic uncertainties. No evidence for other possible resonances is found. In addition, the products of electronic partial width and branching fraction for all assumed resonances decaying into$$ {K}^{-}{\overline{\Xi}}^{+}\Lambda /{\Sigma}^0 $$ K − Ξ ¯ + Λ / Σ 0 are determined.

Physics↗

DOE OSTI2024

Search for e + e − → K + K − ψ ( 3770 ) at center-of-mass energies from 4.84 to 4.95 GeV

Using e + e − collision data, corresponding to an integrated luminosity of 892 pb − 1 collected at center-of-mass energies from 4.84 to 4.95 GeV with the BESIII detector, we search for the process e + e − → K + K − ψ ( 3770 ) by reconstructing two charged kaons and one D meson from ψ ( 3770 ) . No significant signal of e + e − → K + K − ψ ( 3770 ) is found and the upper limits of the Born cross sections are reported at 90% confidence level. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

DOE OSTI2024

Collision-energy dependence of deuteron cumulants and proton-deuteron correlations in Au+Au collisions at RHIC

We report the first measurements of cumulants, up to 4th order, of deuteron number distributions and proton-deuteron correlations in Au+Au collisions recorded by the STAR experiment in phase-I of Beam Energy Scan (BES) program at the Relativistic Heavy Ion Collider. Deuteron cumulants, their ratios, and proton-deuteron mixed cumulants are presented for different collision centralities covering a range of center-of-mass energy per nucleon pair $\sqrt{s_{NN}} = 7.7$ to 200 GeV. It is found that the cumulant ratios at lower collision energies favor a canonical ensemble over a grand canonical ensemble in thermal models. An anti-correlation between proton and deuteron multiplicity is observed across all collision energies and centralities, consistent with the expectation from global baryon number conservation. The UrQMD model coupled with a phase-space coalescence mechanism qualitatively reproduces the collision-energy dependence of cumulant ratios and proton-deuteron correlations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Cross section measurement of e + e − → η ψ ( 2 S ) and search for e + e − → η X ˜ ( 3872 )

The energy-dependent cross section for e + e − → η ψ ( 2 S ) is measured at 18 center of mass energies from 4.288 to 4.951 GeV using the BESIII detector. Using the same data samples, we also perform the first search for the reaction e + e − → η X ˜ ( 3872 ) , but no evidence is found for the X ˜ ( 3872 ) in the π + π − J / ψ mass distribution. At each of the 18 center of mass energies, upper limits at the 90% confidence level on the cross section for e + e − → η ψ ( 2 S ) and on the product of the e + e − → η X ˜ ( 3872 ) cross section with the branching fraction of X ˜ ( 3872 ) → π + π − J / ψ are reported. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

DOE OSTI2024

First measurements of the absolute branching fraction of Λ c ( 2625 ) + → Λ c + π + π − and upper limit on Λ c ( 2595 ) + → Λ c + π + π −

The absolute branching fraction of the decay Λ c ( 2625 ) + → Λ c + π + π − is measured for the first time to be ( 50.2 ± 5.7 stat ± 3.5 syst ) % with 368.48 pb − 1 of e + e − collision data collected by the BESIII detector at the center-of-mass energies of s = 4.918 and 4.950 GeV. Although the central value of the result is lower than the theoretical prediction of 67%, obtained from isospin symmetry, they are consistent taking the uncertainties into account. This is the first absolute branching fraction measurement for Λ c ( 2625 ) + since it was found. This measurement is necessary to obtain the coupling constants for the transitions between s -wave and p -wave charmed baryons in heavy hadron chiral perturbation theory. In addition, we search for the decay Λ c ( 2595 ) + → Λ c + π + π − . No significant signal is observed, and the upper limit on its branching fraction is determined to be 85.0% at the 90% confidence level. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

DOE OSTI2024

First Study of Antihyperon-Nucleon Scattering Λ ¯ p → Λ ¯ p and Measurement of Λ p → Λ p Cross Section

Using ( 10.087 ± 0.044 ) × 10 9 J / ψ events collected with the BESIII detector at the BEPCII storage ring, the processes Λ p → Λ p and Λ ¯ p → Λ ¯ p are studied, where the Λ / Λ ¯ baryons are produced in the process J / ψ → Λ Λ ¯ and the protons are the hydrogen nuclei in the cooling oil of the beam pipe. Clear signals are observed for the two reactions. The cross sections in − 0.9 ≤ cos θ Λ / Λ ¯ ≤ 0.9 are measured to be σ ( Λ p → Λ p ) = ( 12.2 ± 1.6 stat ± 1.1 syst ) and σ ( Λ ¯ p → Λ ¯ p ) = ( 17.5 ± 2.1 stat ± 1.6 syst ) mb at the Λ / Λ ¯ momentum of 1.074 GeV / c within a range of ± 0.017 GeV / c , where the θ Λ / Λ ¯ are the scattering angles of the Λ / Λ ¯ in the Λ p / Λ ¯ p rest frames. Furthermore, the differential cross sections of the two reactions are also measured, where there is a slight tendency of forward scattering for Λ p → Λ p , and a strong forward peak for Λ ¯ p → Λ ¯ p . We present an approach to extract the total elastic cross sections by extrapolation. The study of Λ ¯ p → Λ ¯ p represents the first study of antihyperon-nucleon scattering, and these new measurements will serve as important inputs for the theoretical understanding of the (anti)hyperon-nucleon interaction. Published by the American Physical Society 2024

Physics↗

DOE OSTI2024

Search for the production of deuterons and antideuterons in e + e − annihilation at center-of-mass energies between 4.13 and 4.70 GeV

Using a data sample of e + e − collision data corresponding to an integrated luminosity of 19 fb − 1 collected with the BESIII detector at the BEPCII collider, we search for the production of deuterons and antideuterons via e + e − → p p π − d ¯ + c . c . for the first time at center-of-mass energies between 4.13 and 4.70 GeV. No significant signal is observed and the upper limit of the e + e − → p p π − d ¯ + c . c . cross section is determined to be from 9.0 to 145 fb depending on the center-of-mass energy at the 90% confidence level. Published by the American Physical Society 2024

Ablikim, M.↗

DOE OSTI2024

Measurement of e + e − → η J / ψ cross section from s = 3.808 GeV to 4.951 GeV

Using data samples with an integrated luminosity of 22.42 fb − 1 collected by the BESIII detector operating at the BEPCII storage ring, we measure the cross sections of the e + e − → η J / ψ process at center-of-mass energies from 3.808 to 4.951 GeV. Three structures are observed in the line shape of the measured cross sections. A maximum-likelihood fit with ψ ( 4040 ) , two additional resonances, and a nonresonant component are performed. The mass and width of the first additional state are ( 4219.7 ± 2.5 ± 4.5 ) MeV / c 2 and ( 80.7 ± 4.4 ± 1.4 ) MeV , respectively, consistent with the ψ ( 4230 ) . For the second state, the mass and width are ( 4386 ± 13 ± 17 ) MeV / c 2 and ( 177 ± 32 ± 13 ) MeV , respectively, consistent with the ψ ( 4360 ) . The first uncertainties are statistical, and the second ones are systematic. The statistical significance of ψ ( 4040 ) is 8.0 σ and those for ψ ( 4230 ) and ψ ( 4360 ) are more than 10.0 σ . Published by the American Physical Society 2024

Ablikim, M.↗

DOE OSTI2024

Evidence of the singly Cabibbo suppressed decay Λ c + → p π 0

Evidence for the singly Cabibbo suppressed decay Λ c + → p π 0 is reported for the first time with a statistical significance of 3.7 σ based on 6.0 fb − 1 of e + e − collision data collected at center-of-mass energies between 4.600 and 4.843 GeV with the BESIII detector at the BEPCII collider. The absolute branching fraction of Λ c + → p π 0 is measured to be ( 1.5 6 − 0.58 + 0.72 ± 0.20 ) × 10 − 4 . Combining with the branching fraction of Λ c + → n π + , ( 6.6 ± 1.3 ) × 10 − 4 , the ratio of the branching fractions of Λ c + → n π + and Λ c + → p π 0 is calculated to be 3.2 − 1.2 + 2.2 . As an important input for the theoretical models describing the decay mechanisms of charmed baryons, our result indicates that the nonfactorizable contributions play an essential role and their interference with the factorizable contributions should not be significant. In addition, the absolute branching fraction of Λ c + → p η is measured to be ( 1.63 ± 0.3 1 stat ± 0.1 1 syst ) × 10 − 3 . Published by the American Physical Society 2024

Astronomy & Astrophysics↗

DOE OSTI2024

Measurements of the $Z$ 0 /$γ$* cross section and transverse single spin asymmetry in 510 GeV $p$ + $p$ collisions

The differential cross section for Z 0 production, measured as a function of the boson’s transverse momentum (p T ), provides important constraints on the evolution of the transverse momentum dependent parton distribution functions (TMDs). The transverse single spin asymmetry (TSSA) of the Z 0 is sensitive to one of the polarized TMDs, the Sivers function, which is predicted to have the opposite sign in p + p → W/Z + X from that which enters in semi-inclusive deep inelastic scattering. In this Letter, the STAR Collaboration reports the first measurement of the Z 0 /γ* differential cross section as a function of its p T in p+p collisions at a center-of-mass energy of 510 GeV, together with the Z 0 /γ* total cross section. We also report the measurement of Z 0 /γ* TSSA in transversely polarized p+p collisions at 510 GeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS2016

Validation of Cloud Parameters Derived from Geostationary Satellites, AVHRR, MODIS, and VIIRS Using SatCORPS Algorithms

Validation is a key component of remote sensing that can take many different forms. The NASA LaRC Satellite ClOud and Radiative Property retrieval System (SatCORPS) is applied to many different imager datasets including those from the geostationary satellites, Meteosat, Himiwari-8, INSAT-3D, GOES, and MTSAT, as well as from the low-Earth orbiting satellite imagers, MODIS, AVHRR, and VIIRS. While each of these imagers have similar sets of channels with wavelengths near 0.65, 3.7, 11, and 12 micrometers, many differences among them can lead to discrepancies in the retrievals. These differences include spatial resolution, spectral response functions, viewing conditions, and calibrations, among others. Even when analyzed with nearly identical algorithms, it is necessary, because of those discrepancies, to validate the results from each imager separately in order to assess the uncertainties in the individual parameters. This paper presents comparisons of various SatCORPS-retrieved cloud parameters with independent measurements and retrievals from a variety of instruments. These include surface and space-based lidar and radar data from CALIPSO and CloudSat, respectively, to assess the cloud fraction, height, base, optical depth, and ice water path; satellite and surface microwave radiometers to evaluate cloud liquid water path; surface-based radiometers to evaluate optical depth and effective particle size; and airborne in-situ data to evaluate ice water content, effective particle size, and other parameters. The results of comparisons are compared and contrasted and the factors influencing the differences are discussed.

Minnis, P.↗

NASA NTRS1990

Application of symbolic computations to the constitutive modeling of structural materials

In applications involving elevated temperatures, the derivation of mathematical expressions (constitutive equations) describing the material behavior can be quite time consuming, involved and error-prone. Therefore intelligent application of symbolic systems to faciliate this tedious process can be of significant benefit. Presented here is a problem oriented, self contained symbolic expert system, named SDICE, which is capable of efficiently deriving potential based constitutive models in analytical form. This package, running under DOE MACSYMA, has the following features: (1) potential differentiation (chain rule), (2) tensor computations (utilizing index notation) including both algebraic and calculus; (3) efficient solution of sparse systems of equations; (4) automatic expression substitution and simplification; (5) back substitution of invariant and tensorial relations; (6) the ability to form the Jacobian and Hessian matrix; and (7) a relational data base. Limited aspects of invariant theory were also incorporated into SDICE due to the utilization of potentials as a starting point and the desire for these potentials to be frame invariant (objective). The uniqueness of SDICE resides in its ability to manipulate expressions in a general yet pre-defined order and simplify expressions so as to limit expression growth. Results are displayed, when applicable, utilizing index notation. SDICE was designed to aid and complement the human constitutive model developer. A number of examples are utilized to illustrate the various features contained within SDICE. It is expected that this symbolic package can and will provide a significant incentive to the development of new constitutive theories.

Arnold, Steven M.↗

NASA NTRS1989

Computer simulation of the mathematical modeling involved in constitutive equation development: Via symbolic computations

Development of new material models for describing the high temperature constitutive behavior of real materials represents an important area of research in engineering disciplines. Derivation of mathematical expressions (constitutive equations) which describe this high temperature material behavior can be quite time consuming, involved and error prone; thus intelligent application of symbolic systems to facilitate this tedious process can be of significant benefit. A computerized procedure (SDICE) capable of efficiently deriving potential based constitutive models, in analytical form is presented. This package, running under MACSYMA, has the following features: partial differentiation, tensor computations, automatic grouping and labeling of common factors, expression substitution and simplification, back substitution of invariant and tensorial relations and a relational data base. Also limited aspects of invariant theory were incorporated into SDICE due to the utilization of potentials as a starting point and the desire for these potentials to be frame invariant (objective). Finally not only calculation of flow and/or evolutionary laws were accomplished but also the determination of history independent nonphysical coefficients in terms of physically measurable parameters, e.g., Young's modulus, was achieved. The uniqueness of SDICE resides in its ability to manipulate expressions in a general yet predefined order and simplify expressions so as to limit expression growth. Results are displayed when applicable utilizing index notation.

Arnold, S. M.↗

NASA NTRS1988

Symbolic generation of constitutive equations

The use of the symbolic manipulation program MACSYMA for the automatic generation of constitutive equations describing the thermomechanical behavior of complex materials such as metal-matrix composites is demonstrated. Problem-specific algorithms are developed; e.g., for partial differentiation by the chain rule, automatic generation of tree structures, special tensor analysis, and the simplification of expressions. The resulting subprogram package, SDICE, is shown to be fully applicable to both isotropic and anisotropic materials; its potential usefulness as a basis for FEM analyses is indicated.

Tan, H. Q.↗