Engineering topics
Dong, C.
Publications and source records attributed to Dong, C..
Improvement of Drain Breakdown Voltage with A Back-Side Gate on AlGaN/GaN High Electron Mobility Transistors
The effect of a back gate on the dc performance of AlGaN/GaN high electron mobility transistor was investigated. The back gate was fabricated directly under the device active area by etching off the Si substrate, AlN nucleation layer, and graded AlGaN transition layer and depositing Ni/Au-based gate metal on the exposed GaN buffer layer. The reverse bias gate leakage current decreased from 3.9 × 10 -5 to 1.2 × 10 -5 mA/mm by applying -10 V at the back gate. Because of the suppression of gate leakage current by the back gate, the drain on/off ratio improved from 1.8 × 10 5 to 1.2 × 10 6 and the subthreshold swing from 204 to 137 mV/dec. The drain breakdown voltage could be improved by 40% when the back gate was biased at -25 V.
Observation of the electromagnetic doubly OZI-suppressed decay J / ψ → ϕ π 0
Not Available
Measurement of B ( ψ ( 3770 ) → γ χ c 1 ) and search for ψ ( 3770 ) → γ χ c 2
Not Available
Measurements of ψ ( 3686 ) → K − Λ Ξ ¯ + + c . c . and ψ ( 3686 ) → γ K − Λ Ξ ¯ + + c . c .
Not Available
Study of e + e − → ω χ c J at Center of Mass Energies from 4.21 to 4.42 GeV
Not Available
Search for the Y ( 4140 ) via e + e − → γ ϕ J / ψ at s = 4.23 , 4.26 and 4.36 GeV
Not Available
A Novel Backside Gate Structure to Improve Device Performance
Explore the source record for details and available documents.
Observation of e + e − → π 0 π 0 h c and a Neutral Charmoniumlike Structure Z c ( 4020 ) 0
Not Available
Understanding the Cu-Zn brass alloys using a short-range-order cluster model: Significance of specific compositions of industrial alloys
Metallic alloys show complex chemistries that are not yet understood so far. It has been widely accepted that behind the composition selection lies a short-range-order mechanism for solid solutions. The present paper addresses this fundamental question by examining the face-centered-cubic Cu-Zn a-brasses. A new structural approach, the cluster-plus-glue-atom model, is introduced, which suits specifically for the description of short-range-order structures in disordered systems. Two types of formulas are pointed out, [Zn-Cu 12 ]Zn 1,6 and [Zn-Cu 12 ](Zn,Cu) 6 , which explain the a-brasses listed in the American Society for Testing and Materials (ASTM) specifications. In these formulas, the bracketed parts represent the 1 st -neighbor cluster, and each cluster is matched with one to six 2 nd -neighbor Zn atoms or with six mixed (Zn,Cu) atoms. Such a cluster-based formulism describes the 1 st - and 2 nd -neighbor local atomic units where the solute and solvent interactions are ideally satisfied. The Cu-Ni industrial alloys are also explained, thus proving the universality of the cluster-formula approach in understanding the alloy selections. The revelation of the composition formulas for the Cu-(Zn,Ni) industrial alloys points to the common existence of simple composition rules behind seemingly complex chemistries of industrial alloys, therefore offering a fundamental and practical method towards composition interpretations of all kinds of alloys.
Study of e + e - → p p ¯ π 0 in the vicinity of the ψ ( 3770 )
The process e + e - →pp¯π 0 has been studied by analyzing data collected at √s=3.773 GeV, at s√=3.650 GeV, and during a ψ(3770) line shape scan with the BESIII detector at the BEPCII collider. The Born cross section of pp¯π 0 in the vicinity of the ψ(3770) is measured, and the Born cross section of ψ(3770)→pp¯π 0 is extracted considering interference between resonant and continuum production amplitudes. Two solutions with the same probability and a significance of 1.5σ are found. The solutions for the Born cross section of ψ(3770)→pp¯π 0 are 33.8±1.8±2.1 pb and 0.06 +0.10 -0.04 +0.01 -0.01 pb (<0.22 pb at a 90% confidence level). Using the estimated cross section and a constant decay amplitude approximation, the cross section σ(pp¯→ψ(3770)π 0 ) is calculated for the kinematic situation of the planned P¯ANDA experiment. The maximum cross section corresponding to the two solutions is expected to be less than 0.79 nb at 90% confidence level and 122±10 nb at a center-of-mass energy of 5.26 GeV.