Engineering topics
Dodge, D
Publications and source records attributed to Dodge, D.
Adaptive Waveform Correlation Detectors for Arrays: Algorithms for Autonomous Calibration
Waveform correlation detectors compare a signal template with successive windows of a continuous data stream and report a detection when the correlation coefficient, or some comparable detection statistic, exceeds a specified threshold. Since correlation detectors exploit the fine structure of the full waveform, they are exquisitely sensitive when compared to power (STA/LTA) detectors. The drawback of correlation detectors is that they require complete knowledge of the signal to be detected, which limits such methods to instances of seismicity in which a very similar signal has already been observed by every station used. Such instances include earthquake swarms, aftershock sequences, repeating industrial seismicity, and many other forms of controlled explosions. The reduction in the detection threshold is even greater when the techniques are applied to arrays since stacking can be performed on the individual channel correlation traces to achieve significant array gain. In previous years we have characterized the decrease in detection threshold afforded by correlation detection across an array or network when observations of a previous event provide an adequate template for signals from subsequent events located near the calibration event. Last year we examined two related issues: (1) the size of the source region calibration footprint afforded by a master event, and (2) the use of temporally incoherent detectors designed to detect the gross envelope structure of the signal to extend the footprint. In Case 1, results from the PETROBAR-1 marine refraction profile indicated that array correlation gain was usable at inter-source separations out to one or two wavelengths. In Case 2, we found that incoherent detectors developed from a magnitude 6 event near Svalbard were successful at detecting aftershocks where correlation detectors derived from individual aftershocks were not. Incoherent detectors might provide 'seed' events for correlation detectors that then could extend detection to lower magnitudes. This year we addressed a problem long known to limit the acceptance of correlation detectors in practice: the labor intensive development of templates. For example, existing design methods cannot keep pace with rapidly unfolding aftershock sequences. We successfully built and tested an object-oriented framework (as described in our 2005 proposal) for autonomous calibration of waveform correlation detectors for an array. The framework contains a dynamic list of detectors of several types operating on a continuous array data stream. The list has permanent detectors: beam forming power (STA/LTA) detectors which serve the purpose of detecting signals not yet characterized with a waveform template. The framework also contains an arbitrary number of subspace detectors which are launched automatically using the waveforms from validated power detections as templates. The implementation is very efficient such that the computational cost of adding subspace detectors was low. The framework contains a supervisor that oversees the validation of power detections, and periodically halts the processing to revise the portfolio of detectors. The process of revision consists of collecting the waveforms from all detections, performing cross-correlations pairwise among all waveforms, clustering the detections using correlations as a distance measure, then creating a new subspace detector from each cluster. The collection of new subspace detectors replaces the existing portfolio and processing of the data stream resumes. This elaborate scheme was implemented to prevent proliferation of closely-related subspace detectors. The method performed very well on several simple sequences: 2005 'drumbeat' events observed locally at Mt. St. Helens, and the 2003 Orinda, CA aftershock sequence. Our principal test entailed detection of the aftershocks of the San Simeon earthquake using the NVAR array; in this case, the system automatically detected and categorized approximately 2/3 of the events above magnitude 2.8.
GT Merge Process: Version 2.0
This document summarizes the process used to merge GT25 and better data between LANL and LLNL. The merge also includes OUO arrivals provided by AFTAC for events in the merge. The merge process is mostly automated and includes extensive quality control operations at each step. Events in common between the labs are identified and resolved using GT level criteria. Arrivals in common between the labs are also resolved through the use of agreed upon arrival author rankings. Finally, baselined origin times are computed for all crustal events using either teleseismic P-arrivals and the iasp91 model or, in certain regions, regional P-arrivals and regional velocity models that are known to be consistent with teleseismic iasp91 P-wave predictions. We combine the core tables from each contributor and resolve unique and common GT events between contributors. Next, we merge at the pick level so that each distinct EVENT-STATION-PHASE tuple has a unique arrival. All BMEB (Bondar-Myers-Engdahl-Bergman) GT are recalculated and evaluated for adherence to their criteria. Finally, new origin times are computed (baselining) for the merged GT events. In addition to the reconciliation of events and picks between contributors, the merge process involves several quality control steps that are intended to remove outlier and irrelevant data from the final results. The process is described in the section entitled 'Merge Steps'.
GT Merge Process: Version 1.0
This document summarizes the process used to merge GT25 and better data between LANL and LLNL for use in a tomographic inversion for Pn velocity of Eurasia. The merge process is automated and includes extensive quality control operations at each step. Events in common between the labs are identified and resolved using GT level criteria. Arrivals in common between the labs are also resolved through the use of agreed upon arrival author rankings. Finally, baselined origin times are computed for all crustal events using either teleseismic P-arrivals and the iasp91 model or, in certain regions, regional P-arrivals and regional velocity models that are known to be consistent with teleseismic iasp91 P-wave predictions. We combine the core tables from each lab and first resolve unique and common GT events between LANL and LLNL. Phase names are then checked and possibly adjusted for consistency. Next, we merge at the pick level so that each distinct EVENT-STATION-PHASE tuple has a unique arrival. All BMEB (Bondar-Myers-Engdahl-Bergman) GT are evaluated for adherence to their criteria, and possibly re-calculated. Finally, new origin times are computed (baselining) for the merged GT events. In addition to the reconciliation of events and picks between LANL and LLNL, the merge process involves several quality control steps that are intended to remove outlier and irrelevant data from the final results.