Engineering topics
Publications and source records attributed to Dixon, C. E..
Adaptive active low-pass filters incorporate CMOS (Complimentary Metal-Oxide Semiconductor) analog switches (such as 4066 switch) that reduce variation in switch resistance when filter is switched to any selected transfer function.
Several alloys (Hastelloy X, AISI 347, A-286 bolts, Inconel 718, Al 7039-T63 and Ti-5Al-2.5Sn ELI) were irradiated in liquid nitrogen (140 R) to neutron fluences between 10 to the 17th power and 10 to the 19th power nvt (E greater than 1.0 Mev). After irradiation, tensile properties were obtained in liquid nitrogen without permitting any warmup except for some specimens which were annealed at 540 R. The usual trend of radiation damage typical for materials irradiated at and above room temperature was observed, such as an increase in strength and decrease in ductility. However, the damage at 140 R was greater because this temperature prevented the annealing of radiation-induced defects which occurs above 140 R.
Simplified method determines yield strength due to heat treat, irradiation or mechanical treatment. Each specimen in a group of specimens is tested for yield stress point, subjected to heat treat or irradiation, and retested for new yield stress point which is a measure of change in material.
Cryogenic radiation tests on structural alloys for NERVA Program, discussing test environment effects
Explore the source record for details and available documents.