Engineering Papers⌕ Search

Engineering topics

Divan, Ralu

Publications and source records attributed to Divan, Ralu.

At least 55 records · Page 3

Intrinsic Photoconductivity of few-layered ZrS 2 Phototransistors via Multiterminal Measurements

We report intrinsic photoconductivity studies on one of the least examined layered compounds, ZrS 2 .Few-atomic layer ZrS 2 field-effect transistors were fabricated on the Si/SiO 2 substrate and photoconductivity measurements were performed using both two- and four-terminal configurations under the illumination of 532 nm laser source. We measured photocurrent as a function of the incident optical power at several source-drain (bias) voltages. We observe a significantly large photoconductivity when measured in the multiterminal (four-terminal) configuration compared to that in the two-terminal configuration. For an incident optical power of 90 nW, the estimated photosensitivity and the external quantum efficiency (EQE) measured in two-terminal configuration are 0.5 A/W and 120%, respectively, under a bias voltage of 650 mV. Under the same conditions, the four-terminal measurements result in much higher values for both the photoresponsivity (R) and EQE to 6 A/W and 1400%, respectively. This significant improvement in photoresponsivity and EQE in the four-terminal configuration may have been influenced by the reduction of contact resistance at the metal-semiconductor interface, which greatly impacts the carrier mobility of low conducting materials. This suggests that photoconductivity measurements performed through the two-terminal configuration in previous studies on ZrS 2 and other 2D materials have severely underestimated the true intrinsic properties of transition metal dichalcogenides and their remarkable potential for optoelectronic applications.

36 MATERIALS SCIENCE↗

Magnetic Damping Modulation in IrMn 3 / Ni 80 Fe 20 via the Magnetic Spin Hall Effect

Noncollinear antiferromagnets can have additional spin Hall effects due to the net chirality of their magnetic spin structure, which provides for more complex spin-transport phenomena compared to ordinary nonmagnetic materials. Here we investigated how ferromagnetic resonance of permalloy (Ni 80 Fe 20 ) is modulated by spin Hall effects in adjacent epitaxial IrMn 3 films. We observe a large dc modulation of the ferromagnetic resonance linewidth for currents applied along the [001] IrMn 3 direction. Furthermore, this very strong angular dependence of spin-orbit torques from dc currents through the bilayers can be explained by the magnetic spin Hall effect where IrMn 3 provides novel pathways for modulating magnetization dynamics electrically.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin-Wave Frequency Division Multiplexing in an Yttrium Iron Garnet Microstripe Magnetized by Inhomogeneous Field.

Spin waves are promising candidates for information processing and transmission in a broad frequency range. In the realization of magnonic devices, the frequency related division of the spin waves is a critical function for parallel information processing. In this work, we demonstrate a proof-of-concept spin-wave frequency division multiplexing method by magnetizing a homogeneous magnetic microstripe with an inhomogeneous field. The symmetry breaking additional field is introduced by a Permalloy stripe simply placed in lateral proximity to an yttrium iron garnet waveguide. Spin waves with different frequencies can propagate independently, simultaneously, and separately in space along the shared waveguide. This work demonstrates one potential way for parallel information transmission and processing in magnonics.

Zhang, Zhizhi↗

Raman and electrical transport properties of few-layered arsenic-doped black phosphorus

Black phosphorus (b-P) is an allotrope of phosphorus whose properties have attracted great attention. In contrast to other 2D compounds, or pristine b-P, the properties of b-P alloys have yet to be explored. In this report, we present a detailed study on the Raman spectra and on the temperature dependence of the electrical transport properties of As-doped black phosphorus (b-AsP) for an As fraction x = 0.25. The observed complex Raman spectra were interpreted with the support of Density Functional Theory (DFT) calculations since each original mode splits in three due to P–P, P–As, and As–As bonds. Field-effect transistors (FET) fabricated from few-layered b-AsP exfoliated onto Si/SiO 2 substrates exhibit hole-doped like conduction with a room temperature ON/OFF current ratio of ~10 3 and an intrinsic field-effect mobility approaching ~300 cm 2 V -1 s -1 at 300 K which increases up to 600 cm2 V-1 s-1 at 100 K when measured via a 4-terminal method. Remarkably, these values are comparable to, or higher, than those initially reported for pristine b-P, indicating that this level of As doping is not detrimental to its transport properties. The ON to OFF current ratio is observed to increase up to 10 5 at 4 K. At high gate voltages b-AsP displays metallic behavior with the resistivity decreasing with decreasing temperature and saturating below T ~100 K, indicating a gate-induced insulator to metal transition. Similarly to pristine b-P, its transport properties reveal a high anisotropy between armchair (AC) and zig-zag (ZZ) directions. Electronic band structure computed through periodic dispersion-corrected hybrid Density Functional Theory (DFT) indicate close proximity between the Fermi level and the top of the valence band(s) thus explaining its hole doped character. Finally, our study shows that b-AsP has potential for optoelectronics applications that benefit from its anisotropic character and the ability to tune its band gap as a function of the number of layers and As content.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strong Coupling between Magnons and Microwave Photons in On-Chip Ferromagnet-Superconductor Thin-Film Devices

We show superconducting resonator. A coupling strength of 0.152 GHz and a cooperativity of 68 are found for a 30-nm-thick Permalloy stripe. The coupling strength is tunable by rotating the biasing magnetic field or changing the volume of Permalloy. We also observe an enhancement of magnon-photon coupling in the nonlinear regime of the superconducting resonator, which is attributed to the nucleation of dynamic flux vortices. Our results demonstrate a critical step towards future integrated hybrid systems for quantum magnonics and on-chip coherent information transfer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlled interconversion of quantized spin wave modes via local magnetic fields

In the emerging field of magnonics, spin waves are considered for information processing and transmission at high frequencies. Moreover, the manipulation of propagating spin waves in nanostructured waveguides for novel functionality has attracted increased attention. Excitations with uniform magnetic fields in such waveguides favor symmetric spin-wave modes with odd quantization numbers. Interference between multiple odd spin-wave modes leads to a periodic self-focusing effect of the propagating spin waves. Here we demonstrate how antisymmetric spin-wave modes with even quantization numbers can be induced by local magnetic fields in a well-controlled fashion. The concluding interference patterns are discussed within an analytical model and experimentally demonstrated using microfocused Brillouin light scattering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Performances of Silicon-Based Field-Emission Cathodes Coated with UltraNano Crystalline Diamond

Field-emission electron sources have been considered as possible candidates for the production of bright or high-current electron bunches. In this paper, we report on the experimental characterization of silicon-based field-emitter arrays (FEA) in a DC high voltage gap. The silicon cathodes are produced via a simple self-assembling process. The measurement reported in this paper especially compares the field-emission properties of a nanostructured and planar diamond-coated Si-based cathode.

43 PARTICLE ACCELERATORS↗

Nonlinear Mode Coupling and One-to-One Internal Resonances in a Monolayer WS 2 Nanoresonator

Nanomechanical resonators make exquisite force sensors due to their small footprint, low dissipation, and high frequencies. Because the lowest resolvable force is limited by ambient thermal noise, resonators are either operated at cryogenic temperatures or coupled to a high-finesse optical or microwave cavity to reach sub aN Hz -1/2 . sensitivity. Here, we show that operating a monolayer WS 2 nanoresonator in the strongly nonlinear regime can lead to comparable force sensitivities at room temperature. Cavity interferometry was used to transduce the nonlinear response of the nanoresonator, which was characterized by multiple pairs of 1:1 internal resonance. Some of the modes exhibited exotic line shapes due to the appearance of Hopf bifurcations, where the bifurcation frequency varied linearly with the driving force and forms the basis of the advanced sensing modality. The modality is less sensitive to the measurement bandwidth, limited only by the intrinsic frequency fluctuations, and therefore, advantageous in the detection of weak incoherent forces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure Analysis of Bismuth Absorbers for Transition-Edge Sensor X-ray Microcalorimeters

Given its large X-ray stopping power and low specific heat capacity, bismuth (Bi) is a promising absorber material for X-ray microcalorimeters and has been used with transition-edge sensors (TESs) in the past. However, distinct X-ray spectral features have been observed in TESs with Bi absorbers deposited with different techniques. Evaporated Bi absorbers are widely reported to have non-Gaussian low-energy tails, while electroplated ones do not show this feature. In this study, we fabricated Bi absorbers with these two methods and performed microstructure analysis using scanning electron microscopy and X-ray diffraction microscopy. The two types of material showed the same crystallographic structure, but the grain size of the electroplated Bi was about 40 times larger than that of the evaporated Bi. This distinction in grain size is likely to be the cause of their different spectral responses.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Switchable geometric frustration in an artificial-spin-ice–superconductor heterosystem

Geometric frustration emerges when local interaction energies in an ordered lattice structure cannot be simultaneously minimized, resulting in a large number of degenerate states. The numerous degenerate configurations may lead to practical applications in microelectronics(1), such as data storage, memory and logic(2). However, it is difficult to achieve very high degeneracy, especially in a two-dimensional system(3,4). Here, we showcase in situ controllable geometric frustration with high degeneracy in a two-dimensional flux-quantum system. We create this in a superconducting thin film placed underneath a reconfigurable artificial-spin-ice structure(5). The tunable magnetic charges in the artificial-spin-ice strongly interact with the flux quanta in the superconductor, enabling switching between frustrated and crystallized flux quanta states. The different states have measurable effects on the superconducting critical current profile, which can be reconfigured by precise selection of the spin-ice magnetic state through the application of an external magnetic field. We demonstrate the applicability of these effects by realizing a reprogrammable flux quanta diode. The tailoring of the energy landscape of interacting 'particles' using artificial-spin-ices provides a new paradigm for the design of geometric frustration, which could illuminate a path to control new functionalities in other material systems, such as magnetic skyrmions(6), electrons and holes in two-dimensional materials(7,8), and topological insulators(9), as well as colloids in soft materials(10-13).

Wang, Yong-Lei (ORCID:0000000303917757)↗

Silicon compatible Sn-based resistive switching memory

Large banks of cheap, fast, non-volatile, energy efficient, scalable solid-state memories are an increasingly essential component for today's data intensive computing. Conductive-bridge random access memory (CBRAM) – which involves voltage driven formation and dissolution of Cu or Ag filaments in a Cu (or Ag) anode/dielectric (HfO 2 or Al 2 O 3 )/inert cathode device – possesses the necessary attributes to fit the requirements. Cu and Ag are, however, fast diffusers and known contaminants in silicon microelectronics. In this paper, employing a criterion for electrode metal selection applicable to cationic filamentary devices and using first principles calculations for estimating diffusion barriers in HfO 2 , we identify tin (Sn) as a rational, silicon CMOS compatible replacement for Cu and Ag anodes in CBRAM devices. We then experimentally fabricate Sn based CBRAM devices and demonstrate very fast, steep-slope memory switching as well as threshold switching, comparable to Cu or Ag based devices. Furthermore, time evolution of the cationic filament formation along with the switching mechanism is discussed based on time domain measurements (I vs. t) carried out under constant voltage stress. Finally, the time to threshold is shown to be a function of both the voltage stress (V stress ) as well as the initial leakage current (I 0 ) through the device.

42 ENGINEERING↗

Tuning antimicrobial properties of biomimetic nanopatterned surfaces

Here, nature has amassed an impressive array of structures that afford protection from microbial colonization/infection when displayed on the exterior surfaces of organisms. Here, controlled variation of the features of mimetics derived from etched silicon allows for tuning of their antimicrobial efficacy. Materials with nanopillars up to 7 μm in length are extremely effective against a wide range of microbial species and exceed the performance of natural surfaces; in contrast, materials with shorter/blunter nanopillars (<2 μm) selectively killed specific species. Using a combination of microscopies, the mechanisms by which bacteria are killed are demonstrated, emphasizing the dependence upon pillar density and tip geometry. Additionally, real-time imaging reveals how cells are immobilized and killed rapidly. Generic or selective protection from microbial colonization could be conferred to surfaces [for, e.g., internal medicine, implants (joint, dental, and cosmetic), food preparation, and the agricultural industry] patterned with these materials as coatings.

59 BASIC BIOLOGICAL SCIENCES↗

High-energy-resolution diced spherical quartz analyzers for resonant inelastic X-ray scattering

A novel diced spherical quartz analyzer for use in resonant inelastic X-ray scattering (RIXS) is introduced, achieving an unprecedented energy resolution of 10.53 meV at the Ir L 3 absorption edge (11.215 keV). In this work the fabrication process and the characterization of the analyzer are presented, and an example of a RIXS spectrum of magnetic excitations in a Sr 3 Ir 2 O 7 sample is shown.

47 OTHER INSTRUMENTATION↗

Atomic layer deposition frequency-multiplied Fresnel zone plates for hard x-rays focusing

The design and fabrication of Fresnel zone plates for hard x-ray focusing up to 25 keV photon energies with better than 50 nm imaging half-pitch resolution is reported as performed by forming an ultrananocrystalline diamond (UNCD) scaffold, subsequently coating it with atomic layer deposition (ALD) with an absorber/phase shifting material, followed by back side etching of Si to form a diamond membrane device. The scaffold is formed by chemical vapor-deposited UNCD, electron beam lithography, and deep-reactive ion etching of diamond to desired specifications. The benefits of using diamond are as follows: improved mechanical robustness to prevent collapse of high-aspect-ratio ring structures, a known high-aspect-ratio etch method, excellent radiation hardness, extremely low x-ray absorption, and significantly improved thermal/dimensional stability as compared to alternative materials. Central to the technology is the high-resolution patterning of diamond membranes at wafer scale, which was pushed to 60 nm lines and spaces etched 2.2-mu m-deep, to an aspect ratio of 36:1. The absorber growth was achieved by ALD of Ir, Pt, or W, while wafer-level processing allowed to obtain up to 121 device chips per 4 in. wafer with yields better than 60%. X-ray tests with such zone plates allowed resolving 50 nm lines and spaces, at the limit of the available resolution test structures.

36 MATERIALS SCIENCE↗

Eliminating the non-Gaussian spectral response of X-ray absorbers for transition-edge sensors

Transition-edge sensors (TESs) as microcalorimeters for high-energy-resolution X-ray spectroscopy are often fabricated with an absorber made of materials with high Z (for X-ray stopping power) and low heat capacity (for high resolving power). Bismuth represents one of the most compelling options. TESs with evaporated bismuth absorbers have shown spectra with undesirable and unexplained low-energy tails. We have developed TESs with electroplated bismuth absorbers over a gold layer that are not afflicted by this problem and that retain the other positive aspects of this material. To better understand these phenomena, we have studied a series of TESs with gold, gold/evaporated bismuth, and gold/electroplated bismuth absorbers, fabricated on the same die with identical thermal coupling. Lastly, we show that the bismuth morphology is linked to the spectral response of X-ray TES microcalorimeters.

36 MATERIALS SCIENCE↗

Fabrication of hard x-ray zone plates with high aspect ratio using metal-assisted chemical etching

Fresnel zone plates are widely used as nanofocusing optics for x-ray microscopy, where the spatial resolution is set by the width of the finest rings while the efficiency is set by their thickness. This leads to the requirement for high aspect ratio nanofabrication. Metal-assisted chemical etching and atomic layer deposition has already been used to produce high aspect ratio zone plate structures on un-thinned silicon wafers. We demonstrate here a substantial improvement on the achieved aspect ratio up to a value of 500:1, by producing 16 nm wide platinum zones with thicknesses up to 8 µm. At the same time, the silicon substrate was thinned to 15 µm as required for a practically useful optic. First tests have shown 4.8% diffraction efficiency using 20 keV X rays. This x-ray focusing efficiency is higher than most Fresnel zone plates for this photon energy and near what has been achieved with multilayer-coated Kirkpatrick-Baez mirrors, and multilayer Laue lenses. Hard x-ray zone plates offer the advantages of easy alignment, energy tunability, and one can make many zone plates in a batch on a single silicon chip.

Fresnel zone plates↗

3D calcite heterostructures for dynamic and deformable mineralized matrices

Scales are rooted in soft tissues, and are regenerated by specialized cells. The realization of dynamic synthetic analogues with inorganic materials has been a significant challenge, because the abiological regeneration sites that could yield deterministic growth behavior are hard to form. Here we overcome this fundamental hurdle by constructing a mutable and deformable array of three-dimensional calcite heterostructures that are partially locked in silicone. Individual calcite crystals exhibit asymmetrical dumbbell shapes and are prepared by a parallel tectonic approach under ambient conditions. Furthermore, the silicone matrix immobilizes the epitaxial nucleation sites through self-templated cavities, which enables symmetry breaking in reaction dynamics and scalable manipulation of the mineral ensembles. With this platform, we devise several mineral-enabled dynamic surfaces and interfaces. For example, we show that the induced growth of minerals yields localized inorganic adhesion for biological tissue and reversible focal encapsulation for sensitive components in flexible electronics.

36 MATERIALS SCIENCE↗