Engineering Papers⌕ Search

Engineering topics

Divan, R

Publications and source records attributed to Divan, R.

Exploration of synchrotron Mossbauer micrscopy with micrometer resolution: forward and a new backscattering modality on natural samples

New aspects of synchrotron Moessbauer microscopy are presented. A 5 {micro}m spatial resolution is achieved, and sub-micrometer resolution is envisioned. Two distinct and unique methods, synchrotron Moessbauer imaging and nuclear resonant incoherent X-ray imaging, are used to resolve spatial distribution of species that are chemically and magnetically distinct from one another. Proof-of-principle experiments were performed on enriched {sup 57}Fe phantoms, and on samples with natural isotopic abundance, such as meteorites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal properties of silicon nitride beams below one Kelvin.

We have investigated thermal properties of 1 {micro}m thick silicon nitride beams of different lateral dimensions. We measured the thermal conductance by simultaneously employing a TES both as a heater and as a sensor. Based upon these measurements, we calculate the thermal conductivity of the beams. We utilize a boundary limited phonon transport model and assume a temperature independent phonon mean free path. We find that the thermal conductivity is determined by the fraction of diffusive reflection at surface. The following results are obtained from 0.30 K to 0.55 K: the volume heat capacity is 0.082T+0.502T{sup 3} J/m{sup 3}-K . The width dependent phonon mean free path is 6.58 {micro}m, 9.80 {micro}m and 11.55 {micro}m for 10 {micro}m, 20 {micro}m and 30 {micro}m beams respectively at a 29% surface diffusive reflection.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Progress on ANL/KICP bolometers for SPTpol.

We present progress on Argonne/KICP TES bolometers fabricated at Argonne National Labs. These detectors will be used to measure the polarization of the Cosmic Microwave Background radiation with SPTpol. The sensors are bolometers consisting of a Mo/Au transition edge sensors (TES) suspended on silicon nitride with a gold bar absorber to couple radiation to the device. We present optical measurements and thermal characterizations of prototype devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New developments in fabrication of high-energy-resolution analyzers for inelastic x-ray spectroscopy.

In this work new improvements related to the fabrication of spherical bent analyzers for 1 meV energy-resolution inelastic X-ray scattering spectroscopy are presented. The new method includes the use of a two-dimensional bender to achieve the required radius of curvature for X-ray analyzers. The advantage of this method is the ability to monitor the focus during bending, which leads to higher-efficiency analyzers.

43 PARTICLE ACCELERATORS↗

Dimensionality crossover in vortex dynamics of magnetically coupled F-S-F hybrids.

We report on the vortex dynamics in magnetically coupled F-S-F trilayers extracted from the analysis of the resistance-current isotherms. The superconducting thin film that is conventionally in the 2D vortex limit exhibits quite different behavior when sandwiched between ferromagnetic layers. The value of the dynamic critical exponent strongly increases in the F-S-F case due to screening of the stray vortex field by the adjacent ferromagnetic layers, leading to an effective dimensional crossover in vortex dynamics. Furthermore, the directional pinning by the magnetic stripe domains induces anisotropy in the vortex glass transition temperature and causes metastable avalanche behavior at strong driving currents.

36 MATERIALS SCIENCE↗

Matching effect and dynamic phases of vortex matter in Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} nanoribbon with a periodic array of holes.

We report investigations on the dynamics of vortex matter with periodic pinning in crystalline Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} nanoribbons containing an array of nanoscale holes. We found that the matching effect is enhanced near the melting field and persists to higher fields beyond the melting line. We attribute this enhancement to the existence of a soft-solid phase and a mixture of solid-liquid phases near the melting line, enabling the vortices to pin more effectively. We observed distinct regions in the voltage-current curves attributed to transitions of various dynamic phases which also account for the driving current dependent appearance of the matching effect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Broadband mag-noise of patterned permalloy thin films.

A Y-factor noise figure (NF) measurement method is developed to characterize high-frequency mag-noise of a 550 nm wide Permalloy strip array under different dc bias currents. The noise voltage density is obtained. The proposed lumped element transmission line model describes noise properties of the patterned Py array well. Measurement data show that rapid ferromagnetic resonance frequencies (FMR) shift induced by dc bias current is related to the excess magnetization fluctuation thermally created by the combined dc current Joule heating effects and orthogonal Oersted fields.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Nonvolatile logic elements based on magnetically coupled FSF structures.

We demonstrate the evolution of the anisotropic conductivity in the superconductor that is magnetically coupled with two adjacent ferromagnetic layers. Stripe magnetic domain structure in the ferromagnetic layers results in directional superconducting order parameter in the superconducting layer. The conductance anisotropy strongly depends on the period of the magnetic domains and the strength of the local magnetization. The anisotropic conductivity of up to three orders of magnitude can be achieved with spatial critical temperature modulation of 5% of Tc. The effect could be exploited in low temperature nonvolatile logic and storage elements

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal properties of silicon nitride beams below 1 Kelvin.

We have investigated the thermal transport of long, narrow beams of silicon nitride at cryogenic temperatures. Simultaneously employing a superconducting Transition Edge Sensor (TES) as both a heater and a sensor, we measured the thermal conductance of 1 {micro}m thick silicon nitride beams of different lateral dimensions. Based upon these measurements, we calculate the thermal parameters of the beams. We utilize a boundary limited phonon scattering model and assume the phonon mean free path to be temperature independent in the calculation. In the temperature range from 300 mK to 530 mK, the following results are obtained for 20 (30) {micro}m beams: the volume heat capacity is 0.083 T+0.509 T{sup 3} J/m{sup 3}-K, the width dependent phonon mean free path is 9.60 (11.05) {micro}m, and the width dependent thermal conductivity is 5.60 x 10{sup -3} T+3.41 x 10{sup -2} T{sup 3} (6.50 x 10{sup -3} T+3.93 x 10{sup -2} T{sup 3}) W/m-K.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗