Engineering Papers⌕ Search

Engineering topics

Ding, Fei

Publications and source records attributed to Ding, Fei.

198 records · Page 11

Dendrite-Free Lithium Deposition with Self-Aligned Nanorod Structure

Suppressing lithium (Li) dendrite growth is one of the most critical challenges for the development of Li metal batteries. We recently proposed a novel self-healing electrostatic shield (SHES) mechanism which can fundamentally change the Li deposition behavior and lead to the growth of dendrite-free Li films. Here, we report for the first time that the as-deposited dendrite-free Li films grown with assistance of SHES additive are actually composed of highly-aligned and compacted Li nanorods with hemispherical tips. Both surface and cross sectional morphology evolution of the Li films during repeated Li deposition/stripping processes were systematically investigated. A new model has been established to explain the formation and evolution of the Li nanorods. A fundamental understanding on the internal structure and evolution of Li metal films may lead to new approaches to stabilize the long term cycling stability of Li metal anode.

Dendrite-free↗

Dendrite-Suppression Electrolytes for Lithium-Metal and Lithium-Ion Batteries

Lithium (Li) dendrite formation is one of the critical challenges for rechargeable Li-metal batteries and Li-ion batteries, which has not been effectively solved by traditional methods. In this paper, we report the systematic investigation of a novel self-healing electrostatic shield (SHES) mechanism to change the Li deposition behavior by using low-concentration electrolyte additives whose redox potentials are close to that of Li+. The SHES additive cations force Li to be deposited in the region away from protuberant tips due to their preferentially accumulation on the active sites of anode surface. Typical adsorption behavior rather than electrochemical reduction of the additive cation is observed. The existence of Cs+ cations in the electrolytes does not change the components or structure of Li surface films, which is consistent with what the SHES mechanism predicts. The morphologies of deposited Li films on copper substrates are smooth and uniform during repeated deposition-stripping cycles and at various current densities (from 0.1 to 1.0 mA cm-2) by adding only a small amount of Cs+ additive in the electrolytes. Cs+-additive also suppresses Li dendrite growth on carbon anode surface during overcharging, which should improve the safety of Li-ion batteries during abuse conditions. It does not affect the rate capability but improves the long-term cycling stability of Li metal anode, carbon anode and conventional Li-ion cathode materials.

Environmental Molecular Sciences Laboratory↗

2-(4-Methoxyphenyl)ethyl-2-acetamido-2-deoxy-β-D-pyranoside confers neuroprotection in cell and animal models of ischemic stroke through calpain1/PKA/CREB-mediated induction of neuronal glucose transporter 3

Salidroside is proven to be a neuroprotective agent of natural origin, and its analog, 2-(4-Methoxyphenyl)ethyl-2-acetamido-2-deoxy-β-D-pyranoside (named SalA-4 g), has been synthesized in our lab. In this study, we showed that SalA-4 g promoted neuronal survival and inhibited neuronal apoptosis in primary hippocampal neurons exposed to oxygen and glucose deprivation (OGD) and in rats subjected to ischemia by transient middle cerebral artery occlusion (MCAO), respectively, and that SalA-4 g was more neuroprotective than salidroside. We further found that SalA-4 g elevated glucose uptake in OGD-injured primary hippocampal neurons and increased the expression and recruitment of glucose transporter 3 (GLUT3) in ischemic brain. Signaling analysis revealed that SalA-4 g triggered the phosphorylation of CREB, and increased the expression of PKA RII in primary hippocampal neurons exposed to OGD injury, while inhibition of PKA/CREB by H-89 alleviated the elevation in glucose uptake and GLUT3 expression, and blocked the protective effects of SalA-4 g. Moreover, SalA-4 g was noted to inhibit intracellular Ca{sup 2+} influx and calpain1 activation in OGD-injured primary hippocampal neurons. Our results suggest that SalA-4 g neuroprotection might be mediated by increased glucose uptake and elevated GLUT3 expression through calpain1/PKA/CREB pathway. - Highlights: • A salidroside (Sal) analog (SalA-4 g) is prepared to be more neuroprotective than Sal. • SalA-4 g protected hippocampal neurons from oxygen and glucose deprivation insult. • SalA-4 g reduced ischemic injury after transient middle cerebral artery occlusion in rats. • Neuroprotection of SalA-4 g was mediated by GLUT3 level via calpain/PKA/CREB pathway.

60 APPLIED LIFE SCIENCES↗

Effects of Cesium Cations in Lithium Deposition via Self-Healing Electrostatic Shield Mechanism

Lithium (Li) dendrite formation is one of the critical challenges for rechargeable Li metal batteries. The traditional method to suppress Li dendrites by using high-quality solid electrolyte interface (SEI) films cannot effectively solve this problem. Recently, we proposed a novel self-healing electrostatic shield (SHES) mechanism to change the Li deposition behavior. The SHES mechanism forces Li to be deposited in the region away from protuberant tips by using non-Li cations as additives that preferentially accumulate but not deposit on the active sites of Li electrode. In this paper, the electrochemical behavior of cesium cation (Cs+) as the typical non-Li cation suitable for the SHES mechanism was further investigated in detail to reveal its effects on preventing Li dendrites and interactions with Li electrode. It is found that typical adsorption behavior instead of chemical reaction is observed. The existence of Cs+ cation in the electrolyte does not change the components and structure of the Li surface film and this is consistent with the projection of the SHES mechanism. Various factors affecting the effectiveness of SHES mechanism are also discussed. The morphologies of Li films deposited is smooth and uniform during the repeated deposition-stripping cycles and at various current densities (from 0.1 to 1.0 mA cm-2) by adding just a small amount (0.05 M) of Cs+-additive in the electrolyte.

Environmental Molecular Sciences Laboratory↗

Mixed salts of LiTFSI and LiBOB for stable LiFePO4-based batteries at elevated temperatures

To achieve stable long-term cycling stability at elevated temperatures, mixed salts of LiTFSI and LiBOB are used to replace LiPF6 salt in non-aqueous electrolytes for LiFePO4-based batteries. It is found that adding LiBOB in LiTFSI-based electrolytes effectively prevents the severe corrosion to Al current collectors that often is observed in LiTFSI-based electrolytes, which have high thermal stability. The cells using LiTFSI-LiBOB-based electrolytes demonstrate superior high temperature (60 °C) stability and very similar room temperature performance (i.e., cycling stability and rate capability) when compared to cells using the LiPF6-based electrolyte.

25 ENERGY STORAGE↗

Integrated vertical microcavity using a nano-scale deformation for strong lateral confinement

We report on the realization of a solid state Fabry-Pérot-like microcavity that uses a small Gaussian-shaped deformation inside the cavity to achieve strong lateral photon confinement on the order of the wavelength. Cavities with a mode volume V < 0.4 μm{sup 3} and a quality factor Q > 1000 are fabricated by means of focused ion beam milling, removing the necessity for etched sidewalls as required for micropillar cavities. Perylene-diimide dye doped polystyrene was embedded in the microcavity and probed by time-resolved microphotoluminescence. A Purcell enhancement of the spontaneous emission rate by a factor of 3.5 has been observed at room temperature.

36 MATERIALS SCIENCE↗

Lithium Metal Anodes for Rechargeable Batteries

Rechargeable lithium metal batteries have much higher energy density than those of lithium ion batteries using graphite anode. Unfortunately, uncontrollable dendritic lithium growth inherent in these batteries (upon repeated charge/discharge cycling) and limited Coulombic efficiency during lithium deposition/striping has prevented their practical application over the past 40 years. With the emerging of post Li-ion batteries, safe and efficient operation of lithium metal anode has become an enabling technology which may determine the fate of several promising candidates for the next generation of energy storage systems, including rechargeable Li-air battery, Li-S battery, and Li metal battery which utilize lithium intercalation compounds as cathode. In this work, various factors which affect the morphology and Coulombic efficiency of lithium anode will be analyzed. Technologies used to characterize the morphology of lithium deposition and the results obtained by modeling of lithium dendrite growth will also be reviewed. At last, recent development in this filed and urgent need in this field will also be discussed.

25 ENERGY STORAGE↗

Effects of Carbonate Solvents and Lithium Salts on Morphology and Coulombic Efficiency of Lithium Electrode

The application of lithium (Li) metal anode in rechargeable batteries is hindered by Li dendrite growth during Li deposition and low Li Coulombic efficiency (CE), where the nonaqueous electrolyte plays a critical role. In this work, the effects of different carbonate solvents and Li salts on Li deposition morphology and CE were systematically investigated. Typically cyclic carbonates are found to favor the formation of uniform Li film and improve Li CE than linear carbonates do. Several specific cyclic carbonates that are conventionally used as solid electrolyte interface formation additives in Li ion batteries can also improve the CE of Li anode. Furthermore, among the nine electrolyte salts studied, LiAsF6 and LiBOB lead to the highest CE for Li anode. LiBOB also leads to much smoother Li morphology than other salts do. Considering the better safety of LiBOB as compared to LiAsF6, LiBOB is a promising Li salt for rechargeable Li metal batteries with high CE. By combining the best electrolyte solvent/salt that can lead to high Li CE and novel electrolyte additives that can prevent dendrite formation, it is possible to find an electrolyte that not only prevents Li dendrite formation but also lead to high CE during Li deposition/stripping processes.

Environmental Molecular Sciences Laboratory↗

Simply AlF3-treated Li4Ti5O12 composite anode materials for stable and ultrahigh power lithium-ion batteries

The commercial Li4Ti5O12 (LTO) is successfully modified by AlF3 via a low temperature process. After being calcined at 400oC for 5 hours, AlF3 reacts with LTO to form a composite material which mainly consists of Al3+ and F- co-doped LTO with small amounts of anatase TiO2 and Li3AlF6. Al3+ and F- co-doped LTO demonstrates largely improved rate capability comparing to the pristine LTO. Since the amount of the byproduct TiO2 is relatively small, the modified LTO electrodes retain the main voltage characteristics of LTO with a minor feature similar to those of anatase TiO2. The doped LTO anodes deliver higher discharge capacity and significantly improved high-rate performance when compared to the pristine LTO anode. They also demonstrate excellent long-term cycling stability at elevated temperatures. Therefore, Al3+ and F- co-doped LTO synthesized at low temperature is an excellent anode for stable and ultra-high power lithium-ion batteries.

Anode↗

Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism

Lithium metal batteries are called the “holy grail” of energy storage systems. However, lithium dendrite growth in these batteries has prevented their practical applications in the last 40 years. Here we show a novel mechanism which can fundamentally change the dendritic morphology of lithium deposition. A low concentration of the second cations (including ions of cesium, rubidium, potassium, and strontium) exhibits an effective reduction potential lower than the standard reduction potential of lithium ions when the chemical activities of these second cations are much lower than that of lithium ions. During lithium deposition, these second cations will form a self-healing electrostatic shield around the initial tip of lithium whenever it is formed. This shield will repel the incoming lithium ions and force them to deposit in the smoother region of the anode so a dendrite-free film is obtained. This mechanism is effective on dendrite prevention in both lithium metal and lithium ion batteries. They may also prevent dendrite growth in other metal batteries and have transformational impact on the smooth deposition in general electrodeposition processes.

cesium↗

Making Li-air batteries rechargeable: material challenges

A Li-air battery could potentially provide three to five times higher energy density/specific energy than conventional batteries, thus enable the driving range of an electric vehicle comparable to a gasoline vehicle. However, making Li-air batteries rechargeable presents significant challenges, mostly related with materials. Herein, we discuss the key factors that influence the rechargeability of Li-air batteries with a focus on nonaqueous system. The status and materials challenges for nonaqueous rechargeable Li-air batteries are reviewed. These include electrolytes, cathode (electocatalysts), lithium metal anodes, and oxygen-selective membranes (oxygen supply from air). The perspective of rechargeable Li-air batteries is provided.

Energy storage↗

Effects of cell positive cans and separators on the performance of high-voltage Li-ion batteries

The effects of different cell cans and separators on the first-cycle Coulombic efficiency and long-term cycling stability of high voltage spinel cathode were investigated systematically. Compared to stainless steel (SS) positive-cans, aluminum (Al)-clad SS-316 positive-cans have a much better resistance to oxidation at high voltages thus improving the initial Coulombic efficiency of the batteries by more than 13%. Among the five separators studied in this work, polyethylene (PE) separator shows the best electrochemical stability. The cells using LiCr0.05Ni0.45Mn1.5O4 as cathode, Al-clad positive-can, and PE separator exhibit the first-cycle Columbic efficiency of about 90% and a capacity fading of only 0.01% per cycle.

36 MATERIALS SCIENCE↗

Reinvestigation on the state-of-the-art nonaqueous carbonate electrolytes for 5 V Li-ion battery applications

The charging voltage limits of mixed carbonate solvents for Li-ion batteries have been systematically investigated from 4.9 to 5.3 V in half cells using Cr-doped spinel cathode material LiNi0.45Cr0.05Mn1.5O4. We found that the stability of conventional carbonate electrolytes is strongly related to the stability and properties of the cathode materials at both lithiated and de-lithiated states. It is the first time to report that the conventional electrolytes based on mixtures of ethylene carbonate (EC) and linear carbonate (dimethyl carbonate - DMC, ethyl methyl carbonate - EMC, and diethyl carbonate - DEC) have shown very similar long-term cycling performance when cycled up to 5.2 V on LiNi0.45Cr0.05Mn1.5O4. The discharge capacity increases with the charge cutoff voltage and reaches the highest discharge capacity at 5.2 V. The capacity retention is about 87% after 500 cycles at 1C rate for all three carbonate mixtures when cycled between 3.0 V and 5.2V. The first-cycle efficiency has a maximum value at 5.1 V, with an average from 83% to 85% at C/10 rate. When cycled to 5.3 V, EC-DMC still shows good cycling performance but EC-EMC and EC-DEC show faster capacity fading. EC-DMC and EC-EMC have much better rate capability than EC-DEC. In addition, the first-cycle irreversible capacity loss increases with the cutoff voltage and the 'inactive' conductive carbon has also been found to be partly associated with the low first-cycle Coulombic efficiency at high voltages due to electrolyte decomposition and probably the PF6- anion irreversible intercalation.

25 ENERGY STORAGE↗

H + diffusion and electrochemical stability of Li 1+x+y Al x Ti 2-x SiyP 3-y O 12 glass in aqueous Li/air battery electrolytes

It is well known that LATP (Li 1+x+y Al x Ti 2-x SiyP 3-y O 12 ) glass is a good lithium ion conductor. However, the interaction between LATP glass and H+ ions (including its diffusion and surface adsorption) needs to be well understood before the long-term application of LATP glass in an aqueous electrolyte based Li-air batteries where H+ always present. In this work, we investigate the H+ ion diffusion properties in LATP glass and their surface interactions using both experimental and modeling approaches. Our analysis indicates that the apparent H+ related current observed in the initial cyclic voltammetry scan should be attributed to the adsorption of H+ ions on the LATP glass rather than the bulk diffusion of H+ ions in the glass. Furthermore, the density functional theory calculations indicate that the H+ ion diffusion energy barrier (3.21 eV) is much higher than that of Li+ ion (0.79 eV) and Na+ ion (0.79 eV) in NASICON type LiTi 2 (PO 4 ) 3 material. As a result, the H+ ion conductivity in LATP glass is negligible at room temperature. However, significant surface corrosion was found after the LATP glass was soaked in strong alkaline electrolyte for extended time. Therefore, appropriate electrolytes have to be developed to prevent the corrosion of LATP glass before its practical application for Li-air batteries using aqueous electrolyte.

25 ENERGY STORAGE↗

Conductive Rigid Skeleton Supported Silicon as High-Performance Li-Ion Battery Anodes

A cost effective and scalable method is developed to prepare a core-shell structured Si/B 4 C composite with graphite coating with high efficiency, exceptional rate performance and long-term stability. In this material, conductive B 4 C with high Mohs hardness serves not only as micro-/nano- millers in the ball-milling process to break down micron-sized Si but also as the conductive rigid skeleton to support the in-situ formed sub-10 nm Si particles to alleviate the volume expansion during charge/discharge. The Si/B 4 C composite is coated with a few graphitic layers to further improve the conductivity and stability of the composite. The Si/B4C/graphite (SBG) composite anode shows excellent cyclability with a specific capacity of ~822 mAh∙g -1 (based on the weight of the entire electrode, including binder and conductive carbon) and ~94% capacity retention over 100 cycles at 0.8C rate. This new structure has the potential to provide adequate storage capacity and stability for practical applications, and good opportunity for large scale manufacturing using commercially available materials and technologies.

25 ENERGY STORAGE↗

Hollow Core-Shell Structured Porous Si-C Nanocomposites for Li-Ion Battery Anodes

Hollow core-shell structured porous Si-C nanocomposites with void space up to tens of nanometers are designed to accommodate the volume expansion during lithiation for high-performance Li-ion battery anodes. An initial capacity of {approx}760 mAh/g after formation cycles (based on the entire electrode weight) with {approx}86% capacity retention over 100 cycles is achieved at a current density of 1 A/g. Good rate performance is also demonstrated.

36 MATERIALS SCIENCE↗

The Stability of Organic Solvents and Carbon Electrode in Nonaqueous Li-O2 Batteries

The effect of different kinds of aprotic organic solvents on the discharge performance and discharge products in Li-O2 batteries was systematically investigated. The discharge products deposited in air cathodes were analyzed by X-ray diffraction, in situ gas chromatography/mass spectroscopy and X-ray photoelectron spectroscopy. We found that a significant amount of Li2O2 can be formed in glyme-based electrolytes during the discharge process, while only small amount of Li2O2 is produced in electrolytes of phosphate, nitrile, ionic liquid and sulfoxide. However, in all the seven types of solvent systems we studied, Li2CO3 and LiF were still formed as byproducts whose compositions are strongly related to the solvents. Li2CO3 is produced not from the carbon air electrode but from oxidation and decomposition of the solvent as we verified by using a 13C-labeled carbon electrode and the solid-state 13C-MAS NMR technique. The formation of Li2CO3 and LiF during discharge will greatly reduce the Coulombic efficiency and cycle life of the Li-air batteries. Therefore, better electrolytes that can ensure the formation of Li2O2 but minimize other reaction products formed on air electrodes of Li-air batteries need to be further investigated.

25 ENERGY STORAGE↗

Enhanced performance of graphite anode materials by AlF3 coating for lithium-ion batteries

In order to form the stable surface film and to further enhance the long-term cycling stability of the graphite anodes of lithium-ion batteries, the surface of graphite powders has been modified by AlF3 coating through chemical precipitation method. The AlF3-coated graphite shows no evident changes in the bulk structure and a thin AlF3-coating layer of about 2 nm thick is found to uniformly cover the graphite particles with 2 wt% AlF3 content. However, it delivers a higher initial discharge capacity and largely improved rate performances compared to the pristine graphite. Remarkably, AlF3 coated graphite demonstrated a much better cycle life. After 300 cycles, AlF3 coated graphite and uncoated graphite show capacity retention of 92% and 81%, respectively. XPS measurement shows that a more conductive solid electrode interface (SEI) layer was formed on AlF3 coated graphite as compared to uncoated graphite. SEM monograph also reveals that the AlF3-coated graphite particles have a much more stable surface morphology after long-term cycling. Therefore, the improved electrochemical performance of AlF3 coated graphite can be attributed to a more stable and conductive SEI formed on coated graphite anode during cycling process.

36 MATERIALS SCIENCE↗