Engineering Papers⌕ Search

Engineering topics

Dimonte, Guy

Publications and source records attributed to Dimonte, Guy.

Simulations and models for the Richtmyer– Meshkov instability with broadband perturbations

The Richtmyer–Meshkov instability (RMI) is shock driven and affects many phenomena from inertial fusion to supernova explosions. The behavior of single-modes in the RMI has been studied extensively but less is known with the broadband perturbations that occur in applications. Here, we describe extensive numerical simulations and modeling of the RMI with broadband perturbations with an initial power spectrum of the form P∝ k m , where k is the wavenumber. The hydrodynamic condition is the same as in the $\theta$-Group Collaboration [Thornber et al., “Late-time growth rate, mixing, and anisotropy in the multimode narrowband Richtmyer–Meshkov instability: The $\theta$-group collaboration,” Phys. Fluids 29, 105107 (2017)] with a Mach ~1.86 shock and gamma-law = 5/3 fluids with Atwood number A = 0.5. The bubble amplitude h B is found to grow in two stages. Initially, h B undergoes a phase-inversion and grows linearly in time (t) at a rate consistent with a linear theory. Asymptotically, h B grows as a power law $~t^{\theta}$ when $\langle{k}\rangle{|h_B|}$ > O(1), where $\langle{k}\rangle$ is the average wavenumber for the initial spectrum. The RMI behavior in simulations and modeling agree over a wide range of exponent m, spectral width, initial amplitude, and time. The agreement is quantified objectively using statistical analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A modal wave-packet model for the multi-mode Richtmyer–Meshkov instability

In this work, a model for multimode perturbations subject to the Richtmyer–Meshkov (RM) instability is presented and compared with simulations and experiments for conditions relevant to inertial confinement fusion. The model utilizes the single mode response to the RM impulse whereby its amplitude h(k, t) first grows with an initial velocity V 0 ∝ kh(k, 0) that eventually decays in time as 1/kV 0 t. Both the growth and saturation stages are subject to nonlinearities since they depend explicitly on the initial amplitude. However, rather than using the individual mode amplitude h(k, t), nonlinearity is taken to occur when the root-mean-square amplitude h rms (k, t) of a wave-packet within wavenumbers k ± δk becomes comparable to 1/k. This is done because nearby sidebands can act in unison for an auto-correlation distance 1/δk beyond nonlinearity as observed in the beam-plasma instability. Thus, the nonlinear saturation amplitude for each mode is reduced from the usual 1/k by a phase space factor that depends on the physical dimensionality, as in the Haan model for the Rayleigh–Taylor instability. In addition, for RM, the average value of kh rms for the initial spectrum is used to calculate a nonlinear factor F NL that reduces V 0 , as observed for single modes. For broadband perturbations, the model describes self-similar growth ∝t θ as successively longer wavelength modes reach saturation. The growing and saturated modes must be discerned because only the former promote θ and are enhanced by reshock and spherical convergence. All of these flows are described here by the model in good agreement with simulations and experiments.

42 ENGINEERING↗

Quantitative metrics for evaluating thermonuclear design codes and physics models applied to the National Ignition Campaign

In this study, physics models and design codes for hot dense plasmas undergoing thermonuclear burn are evaluated objectively using statistical metrics that compare the difference between calculations and data relative to the experimental uncertainties. The analysis is applied to the National Ignition Campaign (NIC) because it is relevant, comprehensive, and well documented. The statistics confirm that a key process afflicting NIC performance is mix driven by hydrodynamic instabilities as approximated here using the KL model [G. Dimonte and R. Tipton, Phys. Fluids 18, 085101 (2006)]. New physics models are also presented for instability-driven magnetic fields [B. Srinivasan et al., Phys. Rev. Lett. 108, 165002 (2012)] and the Coulomb logarithm for electron–ion thermal relaxation [G. Dimonte and J. Daligault, Phys. Rev. Lett. 101, 135001 (2008)]. The plasma-generated magnetic fields improve the agreement between code and data in a statistically significant manner by reducing the electron thermal conduction in the hot-spot via the Hall term. The Coulomb logarithm is presented in a numerically practical form that incorporates recent theoretical advances. However, it does not improve the agreement between the code and data because the thermal relaxation is so fast in non-ignited NIC plasmas that the typical 20% error does not change the tight coupling between electrons and ions. Even with these improved physics models, the one-dimensional simulations presented here are not able to describe the high-convergence NIC implosions in a statistically acceptable manner. Of the heroic multi-dimensional simulations of Clark et al. [Phys. Plasmas 23, 056302 (2016)], only those in three-dimensions satisfy the statistical acceptance criterion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulating Rayleigh-Taylor (RT) instability using PPM hydrodynamics @scale on Roadrunner (u)

The effect of initial conditions on the self-similar growth of the RT instability is investigated using a hydrodynamics code based on the piecewise-parabolic-method (PPM). The PPM code was converted to the hybrid architecture of Roadrunner in order to perform the simulations at extremely high speed and spatial resolution. This paper describes the code conversion to the Cell processor, the scaling studies to 12 CU's on Roadrunner and results on the dependence of the RT growth rate on initial conditions. The relevance of the Roadrunner implementation of this PPM code to other existing and anticipated computer architectures is also discussed.

97 MATHEMATICS AND COMPUTING↗

Ejecta model development at pRad (u)

In July 2009 we fielded three explosively (HE) driven Richtmyer-Meshkov instability experiments at the LANSCE Proton Radiography Facility (pRad), and in August of 2009 we fielded one flyer plate experiment on the pRad 40 mm powder gun. One HE experiment was done in vacuum, and the other two within four atmospheres of noble gasses: Xe and Ne. These two gases were chosen to study the viscous effects on ejecta formation. It is unexpected, but the viscosity {eta} of Ne is twice that of Xe, and, due to the atomic mass difference between the two, the kinematic viscosity ({eta}/{rho}) of Ne is about ten times that of Xe. The results showed that ejecta formation is sensitively linked to the gas density, which implies that the Weber number is more important in ejecta formation than the Reynolds number.

99 GENERAL AND MISCELLANEOUS↗

Simulations and model of the nonlinear Richtmyer–Meshkov instability

The nonlinear evolution of the Richtmyer-Meshkov (RM) instability is investigated using numerical simulations with the FLASH code in two-dimensions (2D). The purpose of the simulations is to develop an empiricial nonlinear model of the RM instability that is applicable to inertial confinement fusion (ICF) and ejecta formation, namely, at large Atwood number A and scaled initial amplitude kh o (k ≡ wavenumber) of the perturbation. The FLASH code is first validated with a variety of RM experiments that evolve well into the nonlinear regime. They reveal that bubbles stagnate when they grow by an increment of 2/k and that spikes accelerate for A > 0.5 due to higher harmonics that focus them. These results are then compared with a variety of nonlinear models that are based on potential flow. We find that the models agree with simulations for moderate values of A < 0.9 and kh o < 1, but not for the larger values that characterize ICF and ejecta formation. We thus develop a new nonlinear empirical model that captures the simulation results consistent with potential flow for a broader range of A and kh o . Our hope is that such empirical models concisely capture the RM simulations and inspire more rigorous solutions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗