Engineering topics
Publications and source records attributed to Dicus, J. H..
The application, installation, and monitoring of dynamic strain gage instrumentation on the rotating fan blades for subsonic stalled flutter mode of the first fan rotor are described. The engine installation, the modifications to the engine controls to obtain off schedule operation of the fan, engine aerodynamic instrumentation, and general data acquisition systems are discussed.
The measured effects of inlet pressure distortion on the internal flow temperatures and pressures of a TF30-P-3 afterburning turbofan engine are reported. Extensive inner-stage instrumentation combined with stepwise rotation of pressure distortion provided a high degree of circumferential resolution in the data. The steady-state spatial variation in pressures, temperature, and calculated flow velocity and the amplitude and extent of the distorted sectors are given. Data are presented for runs of 77 and 90 percent of low-speed-rotor design speed at pressure distortion levels two-thirds of that required to stall the engine. These data are compared with data taken at clean-inlet conditions. Results indicate that the inlet pressure distortion was quickly attenuated within the compressor, except at the hub of the low-pressure compressor. The distorted sectors also swirled and varied in extent as they passed through the engine. Average velocities within the compressor were about equal to the clean-inlet values.
Program generates inlet contour maps with choice of mapping parameters. Contour maps are represented by symbols on picture produced by line printer. Program also generates variety of simple circumferential and radial distortion parameters that enable calculation of almost any specific distortion parameter.
A computer program is presented and described that generates jet engine inlet flow contour maps and inlet flow distortion parameters. The program input consists of an array of measurements describing the flow conditions at the engine inlet. User-defined distortion parameters may be calculated.
Turbofan engine used for evaluating air jets as steady state inlet flow distortion device