Engineering topics

Deshpande, M. D.

Publications and source records attributed to Deshpande, M. D..

27 records · Page 2

NASA NTRS1995

Analysis of elliptically polarized cavity backed antennas using a combined FEM/MoM/GTD technique

Radiation pattern prediction analysis of elliptically polarized cavity backed aperture antennas in a finite ground plane is carried out using a combined finite element method (FEM)/method of moments (MoM)/geometrical theory of diffraction (GTD) technique. The magnetic current on the cavity-backed aperture in an infinite ground plane is calculated using the combined FEM/MoM analysis. GTD, including the slope diffraction contribution, is used to calculate the diffracted fields due to both soft and hard polarizations at the edges of the finite ground plane. Numerical results for the radiation patterns of a cavity backed circular spiral microstrip patch antenna excited by a coaxial probe in a finite rectangular ground plane are computed and compared with experimental results.

Reddy, C. J.↗

NASA NTRS1993

Benchmarks of simple, generic, shaped plates for validation of low-frequency electromagnetic computational codes

The validation of low-frequency measurements and electromagnetic (EM) scattering computations for several simple, generic shapes, such as an equilateral-triangular plate, an equilateral-triangular plate with a concentric equilateral-triangular hole, and diamond- and hexagonal-shaped plates, is discussed. The plates were constructed from a thin aluminum sheet with a thickness of 0.08 cm. EM scattering by the planar plates was measured in the experimental test range (ETR) facility of NASA Langley Research Center. The dimensions of the plates were selected such that, over the frequency range of interest, the dimensions were in the range of lambda0 to 3(lambda0). In addition, the triangular plate with a triangular hole was selected to study internal-hole resonances.

Deshpande, M. D.↗

NASA NTRS1989

Characteristic impedance of microstrip lines

The dyadic Green's function for a current embedded in a grounded dielectric slab is used to analyze microstrip lines at millimeter wave frequencies. The dyadic Green's function accounts accurately for fringing fields and dielectric cover over the microstrip line. Using Rumsey's reaction concept, an expression for the characteristic impedance is obtained. The numerical results are compared with other reported results.

Bailey, M. C.↗

NASA NTRS1989

Analysis of reactively loaded microstrip disk antenna

The moment method solution to the problem of a reactively loaded circular patch is presented. Using the reaction integral equation in conjuction with the method of moments, parameters of the Thevenin's equivalent network for the loaded patch are obtained. From the equivalent network parameters an expression for the imput impedance of the loaded patch is derived. A design procedure for a circularly polarized disk antenna is presented. Computed results are compared with the experimental data.

Deshpande, M. D.↗

NASA NTRS1987

Characteristics of inhomogeneous coupled cylindrical striplines

Using conformal transformation, closed-form expressions for the even and odd mode impedances of inhomogeneous coupled cylindrical striplines are presented. It is shown that the analysis can be extended for the calculation of characteristics of coupled cylindrical microstrip lines. The analysis can also be extended to reveal the effects of warping due to environmental changes on an otherwise planar structure.

Reddy, C. J.↗

NASA NTRS1985

Analysis of elliptical and circular microstrip antennas using moment method

A method of calculating the input impedance of either a circular or a slightly elliptical microstrip antenna excited by a coaxial probe is presented. Using the reaction integral equation and the exact dyadic Green's function, the finite substrate thickness is taken into account in the formulation. Good agreement with experimental results for an elliptical patch is obtained and a design procedure for a circularly polarized antenna is presented.

Bailey, M. C.↗

NASA NTRS1984

Analysis of rectangular microstrip antennas

The problem of microstrip antennas covered by a dielectric substrate is formulated in terms of coupled integro-differential equations with the current distribution on the conducting patch as an unknown quantity. The Galerkin method is used to solve for the unknown patch current. Using the present formulation, the radiation pattern, the resonant frequency, and the bandwidth of a rectangular microstrip antenna are computed. Design data for a rectangular microstrip antenna are also presented.

Bailey, M. C.↗

NASA NTRS1983

Impedance properties of circular microstrip antenna

A moment method solution to the input impedance of a circular microstrip antenna excited by either a microstrip feed or a coaxial probe is presented. Using the exact dyadic Green's function and the Fourier transform the problem is formulated in terms of Richmond's reaction integral equation from which the unknown patch current can be solved for. The patch current is expanded in terms of regular surface patch modes and an attachment mode (for probe excited case) which insures continuity of the current at probe/patch junction, proper polarization and p-dependance of patch current in the vicinity of the probe. The input impedance of a circular microstrip antenna is computed and compared with earlier results. Effect of attachment mode on the input impedance is also discussed.

Deshpande, M. D.↗

NASA NTRS1982

Input impedance of microstrip antennas

Using Richmond's reaction integral equation, an expression is derived for the input impedance of microstrip patch antennas excited by either a microstrip line or a coaxial probe. The effects of the finite substrate thickness, a dielectric protective cover, and associated surface waves are properly included by the use of the exact dyadic Green's function. Using the present formulation the input impedance of a rectangular microstrip antenna is determined and compared with experimental and earlier calculated results.

Deshpande, M. D.↗