Engineering Papers⌕ Search

Engineering topics

Deng, Tao

Publications and source records attributed to Deng, Tao.

32 records · Page 2

All-temperature batteries enabled by fluorinated electrolytes with non-polar solvents

We report carbonate electrolytes are commonly used in commercial non-aqueous Li-ion batteries. However, the high affinity between the solvents and the ions and high flammability of the carbonate electrolytes limits the battery operation temperature window from -20 to +50 °C and voltage window from 0.0 to 4.3 V. Here we tamed the affinity between solvents and Li ions of the nonflammable electrolytes by dissolving the fluorinated electrolytes into highly fluorinated non-polar solvents. The tamed non-flammable electrolytes have a wide voltage window of 0.0 to 5.6 V, wide liquid range from -125 to +70 °C, high Li-ion transference number of 0.7, and low Li-ion desolvation energy. In a wide temperature from -95 to +70 °C, the electrolytes enable both commercial graphite anodes and LiNi0.8Mn0.1Co0.1O2 cathodes to achieve a high Coulombic efficiencies of >99.9%, and the most aggressive Li2 anodes and 5.4 V LiCoMnO4 to achieve a Coulombic efficiencies of >99.4% and 99%, respectively. Even at -85 °C, the LiNi 0.8 Co 0.15 Al 0.05 O 2 ||Li battery can still deliver ~50% of room-temperature capacity

25 ENERGY STORAGE↗

A Pyrazine-Based Polymer for Fast-Charge Batteries

The lack of high-power and stable cathodes prohibits the development of rechargeable metal (Na, Mg, Al) batteries. Here, poly(hexaazatrinaphthalene) (PHATN), an environmentally benign, abundant and sustainable polymer, is employed as a universal cathode material for these batteries. In Na-ion batteries (NIBs), PHATN delivers a reversible capacity of 220 mAh g -1 at 50 mA g -1 , corresponding to the energy density of 440 Wh kg -1 , and still retains 100 mAh g -1 at 10 Ag -1 after 50 000 cycles, which is among the best performances in NIBs. Such an exceptional performance is also observed in more challenging Mg and Al batteries. PHATN retains reversible capacities of 110 mAh g -1 after 200 cycles in Mg batteries and 92 mAh g -1 after 100 cycles in Al batteries. DFT calculations, X-ray photoelectron spectroscopy, Raman, and FTIR show that the electron-deficient pyrazine sites in PHATN are the redox centers to reversibly react with metal ions.

25 ENERGY STORAGE↗

Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery

Solid-state electrolytes (SSEs) are receiving great interest because their high mechanical strength and transference number could potentially suppress Li dendrites and their high electrochemical stability allows the use of high-voltage cathodes, which enhances the energy density and safety of batteries. However, the much lower critical current density and easier Li dendrite propagation in SSEs than in nonaqueous liquid electrolytes hindered their possible applications. Herein, we successfully suppressed Li dendrite growth in SSEs by in situ forming an LiF-rich solid electrolyte interphase (SEI) between the SSEs and the Li metal. The LiF-rich SEI successfully suppresses the penetration of Li dendrites into SSEs, while the low electronic conductivity and the intrinsic electrochemical stability of LiF block side reactions between the SSEs and Li. The LiF-rich SEI enhances the room temperature critical current density of Li 3 PS 4 to a record-high value of >2 mA cm -2 . Moreover, the Li plating/stripping Coulombic efficiency was escalated from 88% of pristine Li 3 PS 4 to more than 98% for LiF-coated Li 3 PS 4 . In situ formation of electronic insulating LiF-rich SEI provides an effective way to prevent Li dendrites in the SSEs, constituting a substantial leap toward the practical applications of next-generation high-energy solid-state Li metal batteries.

25 ENERGY STORAGE↗

Solar-driven interfacial evaporation

As a ubiquitous solar-thermal energy conversion process, solar-driven evaporation has attracted tremendous research attention owing to its high conversion efficiency of solar energy and transformative industrial potential. In recent years, solar-driven interfacial evaporation by localization of solar-thermal energy conversion to the air/liquid interface has been proposed as a promising alternative to conventional bulk heating-based evaporation, potentially reducing thermal losses and improving energy conversion efficiency. In this Review, we discuss the development of the key components for achieving high-performance evaporation, including solar absorbers, evaporation structures, thermal insulators and thermal concentrators, and discuss how they improve the performance of the solar-driven interfacial evaporation system. We describe the possibilities for applying this efficient solar-driven interfacial evaporation process for energy conversion applications. The exciting opportunities and challenges in both fundamental research and practical implementation of the solar-driven interfacial evaporation process are also discussed.

charge transport↗

Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries

Rechargeable Li-metal batteries using high-voltage cathodes can deliver the highest possible energy densities among all electrochemistries. However, the notorious reactivity of metallic lithium as well as the catalytic nature of high-voltage cathode materials largely prevents their practical application. Here, we report a non-flammable fluorinated electrolyte that supports the most aggressive and high-voltage cathodes in a Li-metal battery. Our battery shows high cycling stability, as evidenced by the efficiencies for Li-metal plating/stripping (99.2%) for a 5 V cathode LiCoPO 4 (-99.81%) and a Ni-rich LiNi 0.8 Mn 0.1 ,Co 0.3 ,O 2 cathode (-99.93%). At a loading of 2.0 mAh cm -2 , our full cells retain -93% of their original capacities after 1,000 cycles. Surface analyses and quantum chemistry calculations show that stabilization of these aggressive chemistries at extreme potentials is due to the formation of a several-nanometre-thick fluorinated interphase.

Fan, Xiulin↗

A Universal Organic Cathode for Ultrafast Lithium and Multivalent Metal Batteries

Abstract Low‐cost multivalent battery chemistries (Mg 2+ , Al 3+ ) have been extensively investigated for large‐scale energy storage applications. However, their commercialization is plagued by the poor power density and cycle life of cathodes. A universal polyimides@CNT (PI@CNT) cathode is now presented that can reversibly store various cations with different valences (Li + , Mg 2+ , Al 3+ ) at an extremely fast rate. The ion‐coordination charge storage mechanism of PI@CNT is systemically investigated. Full cells using PI@CNT cathodes and corresponding metal anodes exhibit long cycle life (>10000 cycles), fast kinetics (>20 C), and wide operating temperature range (−40 to 50 °C), making the low‐cost industrial polyimides universal cathodes for different multivalent metal batteries. The stable ion‐coordinated mechanism opens a new foundation for the development of high‐energy and high‐power multivalent batteries.

Fan, Xiulin↗

Self-Templated Formation of P2-type K 0.6 CoO 2 Microspheres for High Reversible Potassium-Ion Batteries

We report that layered metal oxides have been widely used as the best cathode materials for commercial lithium-ion batteries and are being intensively explored for sodium-ion batteries. However, their application to potassium-ion batteries (PIBs) is hampered because of the poor cycling stability and low rate capability due to the larger ionic size of K + than of Li + or Na + . Herein, a facile self-templated strategy was used to synthesize unique P2-type K 0.6 CoO 2 microspheres that consist of aggregated primary nanoplates as PIB cathodes. The unique K 0.6 CoO 2 microspheres with aggregated structure significantly enhanced the kinetics of the K + intercalation/deintercation and also minimized the parasitic reactions between the electrolyte and K 0.6 CoO 2 . The P2-K 0.6 CoO 2 microspheres demonstrated a high reversible capacity of 82 mAh g –1 at 10 mA g –1 , high rate capability of 65 mAh g –1 at 100 mA g –1 , and long cycle life (87% capacity retention over 300 cycles). The high reversibility of the P2-K 0.6 CoO 2 full cell paired with a hard carbon anode further demonstrated the feasibility of PIBs. Lastly, this work not only successfully demonstrates exceptional performance of P2-type K 0.6 CoO 2 cathodes and microspheres K 0.6 CoO 2 ∥hard carbon full cells, but also provides new insights into the exploration of other layered metal oxides for PIBs.

25 ENERGY STORAGE↗

Self-folding graphene-polymer bilayers

In order to incorporate the extraordinary intrinsic thermal, electrical, mechanical, and optical properties of graphene with three dimensional (3D) flexible substrates, we introduce a solvent-driven self-folding approach using graphene-polymer bilayers. A polymer (SU-8) film was spin coated atop chemically vapor deposited graphene films on wafer substrates and graphene-polymer bilayers were patterned with or without metal electrodes using photolithography, thin film deposition, and etching. After patterning, the bilayers were released from the substrates and they self-folded to form fully integrated, curved, and folded structures. In contrast to planar graphene sensors on rigid substrates, we assembled curved and folded sensors that are flexible and they feature smaller form factors due to their 3D geometry and large surface areas due to their multiple rolled architectures. We believe that this approach could be used to assemble a range of high performance 3D electronic and optical devices of relevance to sensing, diagnostics, wearables, and energy harvesting.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal structure of an avian influenza polymerase PA[subscript N] reveals an endonuclease active site

The heterotrimeric influenza virus polymerase, containing the PA, PB1 and PB2 proteins, catalyses viral RNA replication and transcription in the nucleus of infected cells. PB1 holds the polymerase active site and reportedly harbours endonuclease activity, whereas PB2 is responsible for cap binding. The PA amino terminus is understood to be the major functional part of the PA protein and has been implicated in several roles, including endonuclease and protease activities as well as viral RNA/complementary RNA promoter binding. Here we report the 2.2 angstrom (A) crystal structure of the N-terminal 197 residues of PA, termed PA(N), from an avian influenza H5N1 virus. The PA(N) structure has an alpha/beta architecture and reveals a bound magnesium ion coordinated by a motif similar to the (P)DX(N)(D/E)XK motif characteristic of many endonucleases. Structural comparisons and mutagenesis analysis of the motif identified in PA(N) provide further evidence that PA(N) holds an endonuclease active site. Furthermore, functional analysis with in vivo ribonucleoprotein reconstitution and direct in vitro endonuclease assays strongly suggest that PA(N) holds the endonuclease active site and has critical roles in endonuclease activity of the influenza virus polymerase, rather than PB1. The high conservation of this endonuclease active site among influenza strains indicates that PA(N) is an important target for the design of new anti-influenza therapeutics.

36 MATERIALS SCIENCE↗

Hsp90 inhibitors reduce influenza virus replication in cell culture

The viral RNA polymerase complex of influenza A virus consists of three subunits PB1, PB2 and PA. Recently, the cellular chaperone Hsp90 was shown to play a role in nuclear import and assembly of the trimeric polymerase complex by binding to PB1 and PB2. Here we show that Hsp90 inhibitors, geldanamycin or its derivative 17-AAG, delay the growth of influenza virus in cell culture resulting in a 1-2 log reduction in viral titre early in infection. We suggest that this is caused by the reduced half-life of PB1 and PB2 and inhibition of nuclear import of PB1 and PA which lead to reduction in viral RNP assembly. Hsp90 inhibitors may represent a new class of antiviral compounds against influenza viruses.

60 APPLIED LIFE SCIENCES↗