Engineering Papers⌕ Search

Engineering topics

Deng, Jie

Publications and source records attributed to Deng, Jie.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Multidisciplinary Constraints on the Thermal‐Chemical Boundary Between Earth's Core and Mantle

Abstract Heat flux from the core to the mantle provides driving energy for mantle convection thus powering plate tectonics, and contributes a significant fraction of the geothermal heat budget. Indirect estimates of core‐mantle boundary heat flow are typically based on petrological evidence of mantle temperature, interpretations of temperatures indicated by seismic travel times, experimental measurements of mineral melting points, physical mantle convection models, or physical core convection models. However, previous estimates have not consistently integrated these lines of evidence. In this work, an interdisciplinary analysis is applied to co‐constrain core‐mantle boundary heat flow and test the thermal boundary layer (TBL) theory. The concurrence of TBL models, energy balance to support geomagnetism, seismology, and review of petrologic evidence for historic mantle temperatures supports Q CMB ∼15 TW, with all except geomagnetism supporting as high as ∼20 TW. These values provide a tighter constraint on core heat flux relative to previous work. Our work describes the seismic properties consistent with a TBL, and supports a long‐lived basal mantle molten layer through much of Earth's history.

58 GEOSCIENCES↗
DOE OSTI2021

Refinement and Validation of the Head and Neck Lymphedema and Fibrosis Symptom Inventory

Lymphedema and fibrosis (LEF) are common yet overlooked late effects of head and neck cancer and its therapy. Lack of reliable and valid measures of head and neck LEF is a critical barrier to the timely identification and management of head and neck LEF. To fill this gap, we developed and pilot tested a 64-item patient-reported outcome measure ( Lymphedema Symptom Intensity and Distress Survey-Head and Neck, LSIDS-H&N). This article aims to report the process of further validation and refinement of the tool.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2021

Communication—Impact Behaviors of Pouch and Prismatic Battery Modules

The responses of pouch and prismatic battery modules when they are impacted by two types of indenters from three different directions are investigated experimentally. The test results show that the failure mechanism, peak force and penetration that leads to short-circuit in modules strongly depend on the impact direction, indenter shape, cell form factor and module design. It sheds lights on the abuse tolerance of batteries in different scenarios and demonstrates that the cell type, orientation and module structure should be considered simultaneously in order to improve the battery safety in electrical vehicles.

Electrochemistry↗
DOE OSTI2020

Mechanical Modeling and Testing of Pouch Cells under Various Loading Conditions

Understanding the mechanical behaviors of batteries is critical to improve battery safety since mechanical failure may directly lead to short-circuits. Nevertheless, mechanical modeling of batteries is challenging since a cell usually contains multiple thin layers with drastically different material properties, and they exhibit different responses under different loading conditions. In this work, we developed a mechanical model for a large-format pouch cell, where the cell is represented by thick shell elements that are not only computationally efficient but also account for different thickness and material properties of individual components. Moreover, the mechanical properties of active materials in electrodes are described by a continuous surface cap model that can capture both compaction and shear deformation modes and can include strain rate effect and damage. Furthermore, to evaluate the model capabilities, we conducted abuse tests under various loading conditions (quasi-static compression, shear and impact). It is shown that the model prediction of load-displacement relationship and failure condition agree with experimental results, which demonstrates that the developed model can capture the mechanical behaviors of a cell in different abuse events. Details of element formulation, material parameters evaluation and test setup are presented. Capabilities, limitations and future directions of model development are also discussed.

25 ENERGY STORAGE↗
DOE OSTI2020

A magma ocean origin to divergent redox evolutions of rocky planetary bodies and early atmospheres

Magma oceans were once ubiquitous in the early solar system, setting up the initial conditions for different evolutionary paths of planetary bodies. In particular, the redox conditions of magma oceans may have profound influence on the redox state of subsequently formed mantles and the overlying atmospheres. The relevant redox buffering reactions, however, remain poorly constrained. Using first-principles simulations combined with thermodynamic modeling, we show that magma oceans of Earth, Mars, and the Moon are likely characterized with a vertical gradient in oxygen fugacity with deeper magma oceans invoking more oxidizing surface conditions. This redox zonation may be the major cause for the Earth’s upper mantle being more oxidized than Mars’ and the Moon’s. These contrasting redox profiles also suggest that Earth’s early atmosphere was dominated by CO 2 and H 2 O, in contrast to those enriched in H 2 O and H 2 for Mars, and H 2 and CO for the Moon.

58 GEOSCIENCES↗
DOE OSTI2020

Orthotropic Viscoelastic Modeling of Polymeric Battery Separator

The separator is one of the most important components for battery safety since its failure can cause short-circuit that may lead to thermal runaway. As such, understanding the mechanical behaviors of separators is critical to improve battery safety. Nevertheless, modeling the mechanical behaviors of separators is challenging since they usually depend on multiple factors such as orientation, temperature and strain rate due to the microstructure of separators. Here we develop an orthotropic linear viscoelastic model for separators, which takes both anisotropy and strain rate effects into account. This model is the first step of a future model that considers more factors such as temperature and large deformation. The model has been implemented as a user material model in a finite element package, where a discretization algorithm is developed to evaluate the stiffness-based hereditary integral with a kernel of Prony series. The user model has been applied to a polypropylene (PP) separator Celgard ® 2400. The simulation results agree well with experimental data, which include the rate dependent uniaxial tensile behavior of the separator in the two in-plane material directions and in shear, and the strain contour patterns of every strain component during biaxial tension.

25 ENERGY STORAGE↗
DOE OSTI2019

Genomic Variations Underlying Speciation and Niche Specialization of Shewanella baltica

Shewanella baltica was the dominant culturable nitrate-reducing bacterium in the eutrophic and strongly stratified Baltic Sea in the 1980s, where it primarily inhabited the oxic-anoxic transition zone. The genomic structures of 46 of these isolates were investigated through comparative genomic hybridization (CGH), which revealed a gradient of genomic similarity, ranging from 65% to as high as 99%. The core genome of the S. baltica species was enriched in anaerobic respiration-associated genes. Auxiliary genes, most of which locate within a few genomic islands (GIs), were nonuniformly distributed among the isolates. Specifically, hypothetical and mobile genetic element (MGE)-associated genes dominated intraclade gene content differences, whereas gain/loss of functional genes drove gene content differences among less related strains. Among the major S. baltica clades, gene signatures related to specific redox-driven and spatial niches within the water column were identified. For instance, genes involved in anaerobic respiration of sulfur compounds may provide key adaptive advantages for clade A strains in anoxic waters where sulfur-containing electron acceptors are present. Genes involved in cell motility, in particular, a secondary flagellar biosynthesis system, may be associated with the free-living lifestyle by clade E strains. Collectively, this study revealed characteristics of genome variations present in the water column and active speciation of S. baltica strains, driven by niche partitioning and horizontal gene transfer (HGT).

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Facile synthesis of high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions with the assistance of lauric acid and dodecylamine

Highlights: • High surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions are synthesized by a facile method. • Hydrophobic surfaces are obtained with the addition of lauric acid and dodecylamine in the synthesis. • The introduced lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through a coordination effect. • Excellent thermal stability are obtained in lauric acid and dodecylamine assisted materials. - Abstract: Co-precipitation combined with the assistance of lauric acid and dodecylamine was used to synthesize high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions (CZ-L and CZ-D). The promotion effects of lauric acid and dodecylamine were studied systematically by N{sub 2} adsorption-desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR and Raman analysis. After being thermal aged at 1100 °C for 4 h in air, CZ-L and CZ-D present high surface areas of 26 m{sup 2}/g and 16 m{sup 2}/g, respectively. The results indicate that the added lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through coordination effect. The obtained hydrophobic surface could greatly decrease the amount of superficial adsorbed water on the material and significantly reduce the surface tension. The addition of lauric acid and dodecylamine could also effectively support the network structures of the material and resist the collapse of pores upon drying and calcination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2017

Experimental Constraints on Ferropericlase (Mg, Fe)O Melt Viscosity Up to 70 GPa

Abstract During Earth's accretion, Earth's mantle is expected to have been a magma ocean due to large impacts. As such, properties of molten mantle materials are key to understanding Earth's thermochemical evolution. However, due to experimental challenges, transport properties at lower mantle pressures, particularly viscosity, are poorly constrained for mantle melts. In this study, we use quenched dendritic textures to estimate melt viscosities at high pressures for (Mg, Fe)O ferropericlase, one of the major components of the mantle. We find that the viscosity of (Mg, Fe)O melt near liquidus temperatures is ~10 −3 –10 −2 Pa s over the pressure range of 3–70 GPa, which is ~1–2 orders of magnitude lower than previous results for Si‐rich melts at similar conditions. This may have implications for magma ocean cooling and thermochemical evolution of the mantle.

Du, Zhixue↗
DOE OSTI2017

Divergence in Gene Regulation Contributes to Sympatric Speciation of Shewanella baltica Strains

Niche partitioning and sequence evolution drive genomic and phenotypic divergence, which ultimately leads to bacterial diversification. This study investigated the genomic composition of two Shewanella baltica clades previously identified through multilocus sequencing typing and recovered from the redox transition zone in the central Baltic Sea. Comparative genomic analysis revealed significantly higher interclade than intraclade genomic dissimilarity and that a subset of genes present in clade A were associated with potential adaptation to respiration of sulfur compounds present in the redox transition zone. The transcriptomic divergence between two representative strains of clades A and D, OS185 and OS195, was also characterized and revealed marked regulatory differences. We found that both the transcriptional divergence of shared genes and expression of strain-specific genes led to differences in regulatory patterns between strains that correlate with environmental redox niches. For example, under anoxic conditions of respiratory nitrate ammonification, OS185—the strain isolated from a nitrate-rich environment—upregulated nearly twice the number of shared genes upregulated by OS195—the strain isolated from an H 2 S-containing anoxic environment. On the other hand, OS195 showed stronger induction of strain-specific genes, especially those associated with sulfur compound respiration, under thiosulfate-reducing conditions. A positive association between the level of transcriptional divergence and the level of sequence divergence for shared genes was also noted. Our results provide further support for the hypothesis that genomic changes impacting transcriptional regulation play an important role in the diversification of ecologically distinct populations. IMPORTANCE: This study examined potential mechanisms through which co-occurring Shewanella baltica strains diversified to form ecologically distinct populations. At the time of isolation, the strains studied composed the major fraction of culturable nitrate-reducing communities in the Baltica Sea. Analysis of genomic content of 13 S. baltica strains from two clades representing different ecotypes demonstrated that one clade specifically possesses a number of genes that could favor successful adaptation to respire sulfur compounds in the portion of the water column from which these strains were isolated. In addition, transcriptional profiling of fully sequenced strains representative of these two clades, OS185 and OS195, under oxygen-, nitrate-, and thiosulfate-respiring conditions demonstrated that the strains exhibit relatively similar transcriptional responses during aerobic growth but more-distinct transcriptional responses under nitrate- and thiosulfate-respiring conditions. Results from this study provide insights into how genomic and gene regulatory diversification together impacted the redox specialization of the S. baltica strains.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Viscosity jump in the lower mantle inferred from melting curves of ferropericlase

Convection provides the mechanism behind plate tectonics, which allows oceanic lithosphere to be subducted into the mantle as “slabs” and new rock to be generated by volcanism. Stagnation of subducting slabs and deflection of rising plumes in Earth’s shallow lower mantle have been suggested to result from a viscosity increase at those depths. However, the mechanism for this increase remains elusive. Here, we examine the melting behavior in the MgO–FeO binary system at high pressures using the laser-heated diamond-anvil cell and show that the liquidus and solidus of (Mg x Fe 1- x )O ferropericlase ( x = ~0.52–0.98), exhibit a local maximum at ~40 GPa, likely caused by the spin transition of iron. We calculate the relative viscosity profiles of ferropericlase using homologous temperature scaling and find that viscosity increases 10–100 times from ~750 km to ~1000–1250 km, with a smaller decrease at deeper depths, pointing to a single mechanism for slab stagnation and plume deflection.

Science & Technology - Other Topics↗