Engineering Papers⌕ Search

Engineering topics

Dempsey, T. K.

Publications and source records attributed to Dempsey, T. K..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Ride quality meter

A ride quality meter is disclosed that automatically transforms vibration and noise measurements into a single number index of passenger discomfort. The noise measurements are converted into a noise discomfort value. The vibrations are converted into single axis discomfort values which are then converted into a combined axis discomfort value. The combined axis discomfort value is corrected for time duration and then summed with the noise discomfort value to obtain a total discomfort value.

Leatherwood, J. D.↗
NASA NTRS1983

Residents' annoyance responses to aircraft noise events

In a study conducted in the vicinity of Salt Lake City International Airport, community residents reported their annoyance with individual aircraft flyovers during rating sessions conducted in their homes. Annoyance ratings were obtained at different times of the day. Aircraft noise levels were measured, and other characteristics of the aircraft were noted by trained observers. Metrics commonly used for assessing aircraft noise were compared, but none performed significantly better than A-weighted sound pressure level. A significant difference was found between the ratings of commercial jet aircraft and general aviation propeller aircraft, with the latter being judged less annoying. After the effects of noise level were accounted for, no significant differences were found between the ratings of landings and takeoffs. Aircraft noise annoyance reactions are stronger in lowered ambient noise conditions. This is consistent with the theory that reduced nighttime and evening ambient levels could create different reactions at different times of day. After controlling for ambient noise in a multiple regression analysis, no significant differences were found between the ratings of single events obtained during the three time periods: morning, afternoon, and evenings.

Dempsey, T. K.↗
NASA NTRS1983

Ride-Quality Meter

Single- and combined-Axis discomfort are corrected by effects of noise and vibration to yield measure of total discomfort experienced by rider. Three modules transform mathematically-weighted rms accelerations, which represent physical vibration characteristics, into subjective discomfort units. Portable "ride-quality" meter measures passenger discomfort and acceptability of vehicle interior noise and vibration. Meter especially suited for determining vehicle comfort and design tradeoffs and for comparing ride quality of vehicles.

Leatherwood, J. D.↗
NASA NTRS1981

Sources, control, and effects of noise from aircraft propellers and rotors

Recent NASA and NASA sponsored research on the prediction and control of propeller and rotor source noise, on the analysis and design of fuselage sidewall noise control treatments, and on the measurement and quantification of the response of passengers to aircraft noise is described. Source noise predictions are compared with measurements for conventional low speed propellers, for new high speed propellers (propfans), and for a helicopter. Results from a light aircraft demonstration program are considered which indicates that about 5 dB reduction of flyover noise can be obtained without significant performance penalty. Sidewall design studies are examined for interior noise control in light general aviation aircraft and in large transports using propfan propulsion. The weight of the added acoustic treatment is estimated and tradeoffs between weight and noise reduction are discussed. A laboratory study of passenger response to combined broadband and tonal propeller-like noise is described. Subject discomfort ratings of combined tone broadband noises are compared with ratings of broadband (boundary layer) noise alone and the relative importance of the propeller tones is examined.

Mixson, J. S.↗
NASA NTRS1981

Sources, control, and effects of noise from aircraft propellers and rotors

Source noise predictions are compared with measurements for conventional low-speed propellers, for new high speed propellers (propfans), and for a helicopter. Results from a light aircraft demonstration program are described, indicating that about 5-dB reduction of flyover noise can be obtained without significant performance penalty. Sidewall design studies are described for interior noise control in light general aviation aircraft and in large transports using propfan propulsion. The weight of the added acoustic treatment is estimated and tradeoffs between weight and noise reduction are discussed. A laboratory study of passenger response to combined broadband and tonal propeller like noise is described. Subject discomfort ratings of combined tone broadband noises are compared with ratings of broadband (boundary layer) noise alone, and the relative importance of the propeller tones is examined.

Mixson, J. S.↗
NASA NTRS1980

A design tool for estimating passenger ride discomfort within complex ride environments

A series of experimental studies utilizing approximately 2200 test subjects has led to the development of a general empirical model for the prediction of passenger ride discomfort in the presence of complex noise and vibration inputs. The ranges of vibration and noise stimuli used to derive the model included the amplitudes and frequencies that are known to most influence passenger comfort. The ride quality model accounts for the effects of combined axis vibrations (up to three axes simultaneously) and includes corrections for the effect of vibration duration and interior noise. Output of the model consists of an estimate of the passenger discomfort produced by a given noise and/or vibration environment. The discomfort estimate is measured along a continuous scale that spans the range from below discomfort threshold to values of discomfort that are far above discomfort threshold

Leatherwood, J. D.↗
NASA NTRS1980

Variation of aircraft noise annoyance

Laboratory and field studies were conducted to determine the basis for increased sensitivity of people to noise during aircraft noise studies. This change in sensitivity could be attributed to either a physiological time-of-day effect (i.e., a circadian rhythm) or simply to the total number of aircraft noise events experienced during a laboratory test period. In order to investigate the time-of-day factor, noise sensitivity measures were obtained from subjects at home with cassette tape recorders/headsets over a 24 hour period. The effect of number of aircraft noise events on noise sensitivity was investigated within a laboratory. In these tests, measures of sensitivity to noise were obtained from subjects before and after their exposure to varying numbers of aircraft noise events. The 24 hour data showed no evidence that noise sensitivity is physiologically cyclical. Consequently, these data can not explain annoyance response variation to aircraft noise tests conducted during the daytime. However, the number of aircraft noise events did influence the subject's noise sensitivity. This effect completely accounts for the systematic increase in noise sensitivity during a laboratory test period.

Dempsey, T. K.↗
NASA NTRS1979

Discomfort criteria for single-axis vibrations

Experimental investigations were conducted to determine the fundamental relationships governing human subjective discomfort response to single-axis vibrations. The axes investigated were vertical, lateral, longitudinal, roll, and pitch, and the vibrations used were both sinusoidal and random in nature. Results of these investigations provided the basis for: (1) development of a scale of passenger discomfort that is common to all axes of vibration; and (2) generation of discomfort criteria for each axis of each axis and for both types of vibration. Furthermore, empirical equations describing discomfort responses within each axis of vibration are included.

Dempsey, T. K.↗
NASA NTRS1979

Variability of annoyance response due to aircraft noise

An investigation was conducted to study the variability in the response of subjects participating in noise experiments. This paper presents a description of a model developed to include this variability which incorporates an aircraft-noise adaptation level or an annoyance calibration for each individual. The results indicate that the use of an aircraft-noise adaption level improved prediction accuracy of annoyance responses (and simultaneously reduced response variation).

Dempsey, T. K.↗
NASA NTRS1979

Development of noise and vibration ride comfort criteria

A laboratory investigation was directed at the development of criteria for the prediction of ride quality in a noise-vibration environment. The stimuli for the study consisted of octave bands of noise centered at 500 and 2000 Hz and vertical floor vibrations composed of either 5 Hz sinusoidal vibrations, or random vibrations centered at 5 Hz and with a 5 Hz bandwidth. Results indicated that the total subjective discomfort response could be divided into two subjective components. One component consisted of subjective discomfort to vibration and was found to be a linear function of vibration acceleration level. The other component consisted of discomfort due to noise which varied logarithmically with noise level (power relationship). A model of subjective discomfort that accounted for the interdependence of noise and vibration was developed. The model was then used to develop a set of criteria (constant discomfort) curves that illustrate the basic design tradeoffs available between noise and vibration.

Dempsey, T. K.↗
NASA NTRS1978

Effect of vibration duration on human discomfort

The duration effects of random vertical vibration on passenger discomfort were studied in a simulated section of an aircraft cabin configured to seat six persons in tourist-class style. Variables of the study included time of exposure (0.25 min to 60 min) and the rms amplitude of vibration (0.025g to 0.100g). The vibrations had a white noise spectrum with a bandwidth of 10 Hz centered at 5 Hz. Data indicate that the discomfort threshold occurred at an rms vertical acceleration level of 0.027g for all durations of vibration. However, for acceleration levels that exceeded the discomfort threshold, a systematic decrease in discomfort occurred as a function of increasing duration of vibration. For the range of accelerations used, the magnitude of the discomfort decrement was shown to be independent of acceleration level. The results suggest that discomfort from vertical vibration applied in the frequency range at which humans are most sensitive decreases with longer exposure, which is the opposite of the recommendation of the International Standard ISO 2631-1974 (E) Guide for the Evaluation of Human Exposure to Whole-Body Vibration.

Clevenson, S. A.↗
NASA NTRS1978

Human Response to Aircraft-Noise-Induced Building Vibration

The effects of noise induced building structure vibration and the rattle of objects on human response to aircraft flyover noise were investigated in a series of studies conducted in both the field and the laboratory. The subjective detection thresholds for vibration and rattle were determined as well as the effect of vibration and rattle upon aircraft noise annoyance.

Cawthorn, J. M.↗
NASA NTRS1978

Ride quality criteria of multifactor environments

The paper describes a comprehensive ride quality model that accounts for the effects of multifrequency and multitaxis vibration inputs as well as the interactive effects of noise and vibration upon passenger discomfort. The model is based on extensive experimental studies involving a realistic multi-degree-of-freedom laboratory simulator, and data relating to human discomfort response to vertical, lateral, and roll vibrations are presented. Results of studies involving vibration stimuli are expressed by sets of equal discomfort curves for each of three axes of vibration. A set of noise-vibration curves are obtained by an additive procedure, shown to be valid in the range under consideration, which combines the discomfort components due to noise and vibration. Other results from the study of human response to combined noise and vibration stimuli are reported.

Leatherwood, J. D.↗
NASA NTRS1977

An investigation of ride quality rating scales

An experimental investigation was conducted for the combined purposes of determining the relative merits of various category scales for the prediction of human discomfort response to vibration and for determining the mathematical relationships whereby subjective data are transformed from one scale to other scales. There were 16 category scales analyzed representing various parametric combinations of polarity, that is, unipolar and bipolar, scale type, and number of scalar points. Results indicated that unipolar continuous-type scales containing either seven or nine scalar points provide the greatest reliability and discriminability. Transformations of subjective data between category scales were found to be feasible with unipolar scales of a larger number of scalar points providing the greatest accuracy of transformation. The results contain coefficients for transformation of subjective data between the category scales investigated. A result of particular interest was that the comfort half of a bipolar scale was seldom used by subjects to describe their subjective reaction to vibration.

Dempsey, T. K.↗
NASA NTRS1977

Model of aircraft noise adaptation

Development of an aircraft noise adaptation model, which would account for much of the variability in the responses of subjects participating in human response to noise experiments, was studied. A description of the model development is presented. The principal concept of the model, was the determination of an aircraft adaptation level which represents an annoyance calibration for each individual. Results showed a direct correlation between noise level of the stimuli and annoyance reactions. Attitude-personality variables were found to account for varying annoyance judgements.

Dempsey, T. K.↗
NASA NTRS1976

An experimental study for determining human discomfort response to roll vibration

An experimental study using a passenger ride quality apparatus (PRQA) was conducted to determine the subjective reactions of passengers to roll vibrations. The data obtained illustrate the effect upon human comfort of several roll-vibration parameters: namely, roll acceleration level, roll frequency, and seat location (i.e., distance from axis of rotation). Results of an analysis of variance indicated that seat location had no effect on discomfort ratings of roll vibrations. The effect of roll acceleration level was significant, and discomfort ratings increased markedly with increasing roll acceleration level at all roll frequencies investigated. Of particular interest, is the fact that the relationship between discomfort ratings and roll acceleration level was linear in nature. The effect of roll frequency also was significant as was the interaction between roll acceleration level and roll frequency.

Leatherwood, J. D.↗
NASA NTRS1976

Noise and vibration ride comfort criteria

A program is underway at Langley Research Center to develop a comprehensive ride quality model based upon the various physical and psychological factors that most affect passenger ride comfort. Two of the most important factors, namely, vibration and noise were studied to (1) determine whether composite or separate noise and vibration criteria are needed for the prediction of ride quality, (2) determine a noise correction for the previously-defined vibration criteria of the ride quality model, (3) assess whether these noise corrections depend on the nature of the vibration stimuli, i.e., deterministic as opposed to random, and (4) specify noise-vibration criteria for this combined environment. The stimuli for the study consisted of octave bands of noise centered at 500 or 2000 Hz and vertical vibrations composed of either 5 Hz sinusoidal vibration or random vibrations centered at 5 Hz and with a 5 Hz bandwidth. The noise stimuli were presented at levels ranging from ambient to 95 dB(A) and the vibrations at levels ranging from 0.02 to 0.13 g-rms.

Dempsey, T. K.↗