Engineering Papers⌕ Search

Engineering topics

Delferro, Massimiliano

Publications and source records attributed to Delferro, Massimiliano.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Supported Electrophilic Organoruthenium Catalyst for the Hydrosilylation of Olefins

A series of supported electrophilic organoruthenium complexes has been synthesized via surface organometallic chemistry (SOMC) techniques and applied to the selective hydrosilylation of olefins. The air-sensitive 16e - complex Cp*RuMes(PCy 3 ) (1) (Cp* = pentamethylcyclopentadienyl, Mes = mesityl) was synthesized by the treatment of Cp*RuCl(PCy 3 ) with mesityl Grignard MesMgBr. This species was chemisorbed onto sulfated zirconia SO 4 /ZrO 2 , but the resulting material was inactive toward cyclohexene hydrosilylation with phenylsilane. Instead, Cp*RuMes(PCy 3 ) was treated with phenylsilane (PhSiH 3 ) to provide a ruthenium disilyl hydride complex Cp*RuH(SiH 2 Ph) 2 (PCy 3 ) (3), which was fully characterized by NMR spectroscopy and single-crystal X-ray diffraction. Grafting this species onto SO 4 /ZrO 2 resulted in the formation of phenylsilane along with the surface electrophilic species [Cp*RuH(R)(X-SiHPh)(PCy 3 )] (R = H, O 3 S-O or O 3 Zr-O; 4a, 4b, X = O 3 S-O, and O 3 Zr-O, respectively) as the major species. Material 4 was characterized via a combination of spectroscopic techniques including dynamic nuclear polarization (DNP)-enhanced solid-state NMR spectroscopy, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray absorption spectroscopy (XAS), and density function theory (DFT) calculations. Further, capping the remaining acid sites on 4 with Me 3 Si-SiMe 3 provides 5, which significantly reduces side reactions, such as olefin isomerization and silane redistribution. Catalyst 5 is a highly robust and selective hydrosilylation catalyst and can be recycled up to 5 times without significant diminishment of activity. Exclusive anti-Markovnikov regiochemistry, cis-addition selectivity, and the inactivity of secondary and tertiary silanes provide support for the proposed Glaser-Tilley mechanism involving cationic ruthenium silylene species analogous to homogeneous systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultrathin Atomic Layer Deposited Al 2 O 3 Overcoat Stabilizes Al 2 O 3 -Pt/Ni-Foam Hydrogenation Catalysts

Galvanic exchange seeds the growth of Pt nanostructures on Ni foam monolith. Subsequent atomic layer deposition of ultrathin Al 2 O 3 followed by annealing under air affords supported Pt catalysts with ultralow loading (0.020 ppm). Here, the Al 2 O 3 overcoat plays a crucial role in catalyst stability. In addition to the expected enhancement of the stability of the Pt particles on the surface, the ca. 2 nm Al 2 O 3 overcoat appears to also play a crucial role in the overall structural integrity of the NiO x nanoplates which grow on the Ni foam surface as a result of the preparative route. The resulting material is physically robust towards repeated handling and showcases retention of catalytic activity over ten standard catalyst recycling trials; standing in marked contrast to the uncoated samples. Catalyst activity was tested via the hydrogenation of various functionalized styrenes at low temperatures and low hydrogen pressure in ethanol as solvent, with a TOF as high as 9.5 × 10 6 h -1 for unfunctionalized styrene. Notably, the catalysts show excellent tolerance towards F, Cl, and Br substituents, and no hydrogenation of the aromatic ring.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Treasuring trash: Pt/SrTiO 3 catalysts process plastic waste into high-value materials

Single-use plastics are ubiquitous throughout modern society because they have properties that make them desirable in a wide variety of applications, including low cost of production, high thermal and chemical stability, and tunable mechanical properties. Several of the recycling methods currently used to process single-use plastic waste, such as mechanical recycling and pyrolysis, do not selectively process plastic materials into uniform products, as would be advantageous for repurposing these materials in pursuit of a circular economy. Catalytic hydrogenolysis, whereby C–C bonds in polymers are broken over a supported catalyst in the presence of H 2 , is a promising approach to converting plastics into value-added products that can be sold commercially without further purification. Here, in this account, we present some recent advances in polyolefin hydrogenolysis, with a focus on Pt nanoparticles on SrTiO 3 nanocuboid supports (Pt/STO). Current developments in this field, general challenges, and future directions are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanistic Insights into Processive Polyethylene Hydrogenolysis through In Situ NMR

Chemical polymer upcycling by processive catalysts is a promising plastic waste remediation strategy, with the capability of producing selective, high-value products from waste plastics with minimal energy input. We previously designed a novel processive catalyst with a mesoporous SiO 2 shell/Pt nanoparticle/SiO 2 core architecture (mSiO 2 /Pt/SiO 2 ) that deconstructs polyolefins within narrow pores. Here, in this paper, we elucidate the mechanism of processive polyolefin hydrogenolysis using in situ magic-angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy and coarse-grained molecular dynamics simulations. We observe that most polyethylene–Pt interactions do not lead to C–C bond cleavage but rather to the release of the polymer via a dehydrogenation–rehydrogenation cycle. The porous architecture increases the likelihood that a released polymer is later cleaved and enables the catalyst to perform multiple successive cleavages to the same polymer chain. Both experiment and simulation show that the extent of processivity is strongly correlated with the length of the pores, with longer pores leading to a higher processivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structural and reactive evolution of oxidatively grafted Pd catalysts on MnO 2 for the low-temperature oxidation of CO

We report Isolated Pd atoms supported on high surface area MnO 2 , prepared by the oxidative grafting of (bis(tricyclohexylphosphine-palladium(0)), catalyze (>50 turnovers, 17 h) the low temperature (≤325 K) oxidation of CO (7.7 kPa O 2 , 2.6 kPa CO) with results of in situ/operando and ex situ spectroscopic characterization signifying a synergistic role of Pd and MnO 2 in facilitating redox turnovers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Microwave‐Assisted Synthesis of SrTiO 3 Nanocuboids without TiCl 4

Strontium titanate (STO) nanocuboids are a novel support for Pt nanoparticle catalysts (Pt/STO). The first of many steps in commercializing Pt/STO will be developing a scalable, environmentally sustainable, and cost‐effective STO nanocuboid synthesis. Herein, Sr–Ti–OH mixtures are synthesized from various Sr 2+ and Ti 4+ reagents and treated by convection‐ and microwave‐assisted heating to obtain STO nanoparticles. These experiments clarify how phase composition of the prehydrothermal Sr–Ti–OH mixture and choice of heating method affect final nanoparticle morphology. In Sr–Ti–OH mixtures synthesized with TiCl 4 , STO is the most stable phase and precipitates prior to heating, while titania sol–gels are the most stable phase when other Ti 4+ sources are used. STO nanocrystals always form when Sr–Ti–OH mixtures are treated by convection heating, though nanocuboids are only observed if STO precipitates from the Sr–Ti–OH mixture. Microwave‐assisted hydrothermal treatment more rapidly heats the precursor solution, and thus, STO nanocuboids can form from a variety of Sr–Ti–OH mixtures regardless of mixture composition. Two microwave syntheses of STO nanocuboids are reported: one which uses TiCl 4 as a Ti 4+ source, and another that uses titanium(IV) bis(ammonium lactato) dihydroxide ([NH 4 CH 3 CH(O)CO 2 ] 2 Ti(OH) 2 ), a water‐stable Ti 4+ complex.

Peczak, Ian L.↗
DOE OSTI2023

Kinetic and X-ray Absorption Spectroscopic Analysis of Catalytic Redox Cycles over Highly Uniform Polymetal Oxo Clusters

Metal–organic framework materials (MOFs) offer an opportunity for investigating catalytic properties of polymetal oxo clusters that are highly well defined and uniform in nature, in contrast to other classes of catalysts that may exhibit a propensity toward active site heterogeneity. We report herein a kinetic and X-ray absorption spectroscopy (XAS) analysis of the two-electron oxidation of CO over divalent metal sites in MIL-100(M = Fe, Cr) (MIL = Materials of Institut Lavoisier) materials carrying μ 3 -oxo bridged trimers, and connect observations about the kinetic relevance of redox steps to density functional theory (DFT) predictions published previously. The high degree of uniformity evident from in situ titration measurements leads to a congruence in mechanistic inferences made from steady-state catalytic, transient stoichiometric, isotopic exchange, and isotopic tracer data that all point to a sequential mechanism comprised of separate oxidation and reduction half-cycle steps conjoined by an active oxygen intermediate. In situ XAS data reinforce mechanistic conclusions derived from kinetic analysis, and suggest that the active oxygen intermediate may be more appropriately characterized as an iron-oxyl (Fe 3+ –O – ) rather than an iron-oxo (Fe 4+ =O 2– ) species. The Cr analogue of MIL-100 exhibits contrasting rate features that can be rationalized using an identical sequence of steps as MIL-100(Fe), but with a highly dissimilar set of kinetic parameters that can also be validated using transient stoichiometric experiments. The larger coverages of active oxygen intermediates on MIL-100(Cr) are consistent with predictions from prior DFT studies that suggest more stable and less reactive active oxygen species for metals with lower d-electron counts, and point to metal identity as a lever for precisely controlling the kinetic relevance of oxidation and reduction half-cycles in catalytic redox sequences over polymetal oxo clusters. Importantly, the results presented point to the utility of developing broadly applicable structure–catalytic property relationships over MOF nodes specifically, and highly uniform catalysts more generally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Silica Supported Organometallic Ir I Complexes Enable Efficient Catalytic Methane Borylation

Catalytic C–H borylation is an attractive method for the conversion of the most abundant hydrocarbon, methane (CH 4 ), to a mild nucleophilic building block. However, existing CH 4 borylation catalysts often suffer from low turnover numbers and conversions, which is hypothesized to result from inactive metal hydride agglomerates. Herein we report that the heterogenization of a bisphosphine molecular precatalyst, [(dmpe)Ir(cod)CH 3 ], onto amorphous silica dramatically enhances its performance, yielding a catalyst that is 12-times more efficient than the current standard for CH 4 borylation. The catalyst affords over 2000 turnovers at 150 °C in 16 h with a selectivity of 91.5% for mono- vs diborylation. Higher catalyst loadings improve yield and selectivity for the monoborylated product (H 3 CBpin) with 82.8% yield and >99% selectivity being achieved with 1255 turnovers. X-ray absorption and dynamic nuclear polarization-enhanced solid-state NMR spectroscopic studies identify the supported precatalyst as an Ir I species, and indicate that upon completion of catalysis, multinuclear Ir polyhydrides are not formed. This is consistent with the hypothesis that immobilization of the organometallic Ir species on a surface prevents bimolecular decomposition pathways. Importantly, immobilization of the homogeneous Ir I fragment onto amorphous silica represents a unique and simple strategy to improve the TON and longevity of a CH 4 borylation catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Catalytic polymer processing

A method of upcycling polymers to useful hydrocarbon materials. A catalyst with nanoparticles on a substrate selectively docks and cleaves longer hydrocarbon chains over shorter hydrocarbon chains. The catalyst includes metal nanoparticles in an order array on a substrate.

Delferro, Massimiliano↗
DOE OSTI2023

Ultrasmall amorphous zirconia nanoparticles catalyse polyolefin hydrogenolysis

Carbon–carbon bond cleavage reactions, adapted to deconstruct aliphatic hydrocarbon polymers and recover the intrinsic energy and carbon value in plastic waste, have typically been catalysed by metal nanoparticles or air-sensitive organometallics. Metal oxides that serve as supports for these catalysts are typically considered to be inert. Here we show that Earth-abundant, non-reducible zirconia catalyses the hydrogenolysis of polyolefins with activity rivalling that of precious metal nanoparticles. To harness this unusual reactivity, our catalytic architecture localizes ultrasmall amorphous zirconia nanoparticles between two fused platelets of mesoporous silica. Macromolecules translocate from bulk through radial mesopores to the highly active zirconia particles, where the chains undergo selective hydrogenolytic cleavage into a narrow, C18-centred distribution. Calculations indicated that C–H bond heterolysis across a Zr–O bond of a Zr(O) 2 adatom model for unsaturated surface sites gives a zirconium hydrocarbyl, which cleaves a C–C bond via β-alkyl elimination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Catalytic Chemical Recycling of Post-Consumer Polyethylene

Among commercial plastics, polyolefins are the most widely produced worldwide but have limited recyclability. Here, we report a chemical recycling route for the conversion of post-consumer high-density polyethylene (HDPE) into telechelic macromonomers suitable for circular reprocessing. Unsaturation was introduced into HDPE by catalytic dehydrogenation using an Ir-POCOP catalyst without an alkene acceptor. Cross-metathesis with 2-hydroxyethyl acrylate followed by hydrogenation transformed the partially unsaturated HDPE into telechelic macromonomers. The direct repolymerization of the macromonomers gave a brittle material due to the low overall weight-average molecular weight. Aminolysis of telechelic macromonomers with a small amount of diethanolamine increased the overall functionality. The resulting macromonomers were repolymerized through transesterification to generate a polymer with comparable mechanical properties to the starting post-consumer HDPE waste. Finally, depolymerization of the repolymerized material catalyzed by an organic base regenerated the telechelic macromonomers, thereby allowing waste polyethylene materials to enter a chemical recycling pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synthesis of platinum nanoparticles on strontium titanate nanocuboids via surface organometallic grafting for the catalytic hydrogenolysis of plastic waste

Pt/SrTiO 3 (Pt/STO), prepared on small scale by atomic layer deposition (ALD), is a capable heterogeneous catalyst for the selective hydrogenolysis of polyolefins to hydrocarbon oils, providing a promising approach for upcycling plastic waste. However, because deposition by ALD is costly and resource-intensive, a new synthesis of Pt/STO is needed to effectively scale catalyst production and pursue the commercialization of upcycling processes. To that effect, this work details a scalable deposition method for Pt/STO made by surface organometallic chemistry (SOMC) techniques using Pt(II) acetylacetonate or and trimethyl(methylcyclopentadienyl)platinum. The STO support was calcined (550 °C), treated with ozone (200 °C), and finally steamed (200 °C) to afford a clean STO surface populated with only hydroxyl groups. Pt precursors were dissolved in toluene and deposited onto STO. After reduction at 300 °C, the STO support was decorated with 1.0–1.5 nm Pt nanoparticles. The size and loading of these nanoparticles were varied by employing a multi-cycle deposition and oxidation and/or reduction process designed to ALD techniques. In conclusion, these Pt/STO catalysts hydrogenolyzed isotactic polypropylene into liquid products (>95% yield) with average molecular weights of 200–300 Da (~25 carbon atoms) and narrow size distributions at 300 °C and 180 psi H 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Active-Site Determination and Mechanistic Insights in a MOF-Supported Polymerization Catalyst

The structural elucidation of catalyst active sites in heterogeneous catalysts when supported by traditional metal oxides remains a challenge despite the advanced characterization techniques that have been developed. The catalyst-deposition-site nonuniformity in metal oxides inhibits clear structural characterization through bulk spectroscopic methods and rules out the use of single-crystal X-ray diffraction. However, for metal-organic framework (MOF)-supported catalysts, the crystallinity and uniform structures of the underlying support enhance our ability to identify the precatalyst and catalytically active sites and open the door to using single-crystal X-ray diffraction coupled with spectroscopy under reaction conditions. Additionally, the use of in situ X-ray absorption spectroscopy identifies the catalytically active site in diethylaluminum chloride (DEAC)-pretreated Cr-SIM-NU-1000 to be a Cr-ethyl when used for ethylene polymerization. Further kinetic experiments elucidate the effects of ethylene pressure, temperature, catalyst loading, and cocatalyst loading, furthering mechanistic knowledge and helping to deconvolute the structure-function relationship.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗