Engineering topics

Deceglie, Michael G

Publications and source records attributed to Deceglie, Michael G.

6 records

DOE OSTI2020

Inserting a Low-Refractive-Index Dielectric Rear Reflector into PERC Cells: Challenges and Opportunities

One of the simplest and most effective ways to reduce the operating temperature of photovoltaic systems in the field is to reflect unusable, 'sub-bandgap' light with energies below the cell absorber's bandgap energy. In this work, low-refractive index SiO2 nanoparticle films inserted between c-Si wafers and metal electrodes significantly increase the reflectance of sub-bandgap light in fabricated test structures. These films are then integrated into the standard PERC fabrication sequence, revealing that the reflection benefits remains after some processing steps but are lost in certain conditions. The SiO2 nanoparticle films are easily ablated during laser contact opening, but are undesirably etched during post-laser cleaning. After Al metallization, the fully fabricated devices show enhanced sub-bandgap reflection when annealed at moderate temperatures, but energy-dispersive X-ray spectroscopy shows that high-temperature firing causes unwanted Al penetration into the SiO2 nanoparticle film, compromising reflection.

14 SOLAR ENERGY↗

DOE OSTI2020

Enhanced Photovoltaic Soiling in an Urban Environment

Natural soiling, or the deposition of ambient particulate matter (PM) onto the surface of solar glass, causes losses in PV production around the world. Much work in the PV community has focused on soiling in dusty desert environments. However, PV systems in urban environments are exposed to different contaminants and thus soil differently. We present an analysis of PV soiling in such an urban environment considering the impacts of meteorological parameters. We present 1 year of results from a soiling station in an urban location in Colorado. Bare glass samples were exposed outdoors for 11 days alongside the station; results from microscopy and light transmittance measurements show how moisture and dew affect the morphology and optics of contamination on glass. The coupon results suggest that natural (rain) cleanings may not be sufficient to clean solar panels in urban environments. Ion chromatography of soiling on the reference cell surfaces suggest that dry brush cleanings may not sufficiently clean chemicals deposited on solar panel surfaces in urban environments.

14 SOLAR ENERGY↗

DOE OSTI2020

PV Degradation - Mounting & Temperature

Several studies have found indications that PV degradation may increase in hotter climates. We show in this paper that degradation does correlate to higher module temperatures, but that these temperatures are significantly affected by the module mounting and. The mechanisms of degradation vary with module technology and quality. Using data from different HIT module installations we were able to extract an activation energy that is consistent with hydrogen passivation layer degradation. In addition, we show that low degradation in hot climates can be achieved for Al-BSF technology if properly installed to reduce heat transfer in order to thermally decouple the modules from the roof. We also found that monofacial and bifacial PERC module degradation is in line with historical degradation rates of Al-BSF.

14 SOLAR ENERGY↗

DOE OSTI2020

Outdoor Testing of c-Si Photovoltaic Modules with Spectrally-Selective Mirrors for Operating Temperature Reduction

The efficiency of a c-Si cell drops with increasing cell temperature. A typical photovoltaic module with a c-Si cell will operate 20-30K above ambient temperature. Spectrally-selective photonic mirrors which reflect sub-bandgap light can reduce waste heat generated by parasitic absorption in the module and reduce module operating temperature. Here, a spectrally selective 4-layer and 12-layer mirror are designed and fabricated on module cover glass. When integrated into modules, these mirrors reduce the operating temperature of the module by 0.16K and 1.5K, respectively when compared to a module with bare outer glass.

14 SOLAR ENERGY↗

DOE OSTI2020

Numerical Validation of an Algorithm for Combined Soiling and Degradation Analysis of Photovoltaic Systems

We describe and demonstrate an open-source algorithm for simultaneously quantifying degradation and soiling of photovoltaic (PV) systems from energy-production time series data. The new analysis is based on year-on-year degradation rate analysis combined with stochastic rate and recovery soiling analysis. The algorithm is designed to fit into the workflow provided by RdTools, a Python module maintained by NREL and collaboratively developed with the community, which provides a framework and functions for degradation and loss-factor analysis of PV field data. We demonstrate the method on numerically simulated PV data sets and show that it reduces the root-mean-square error of the P50 degradation rate estimate when soiling is present.

14 SOLAR ENERGY↗

DOE OSTI2020

Evaluating the Accuracy of Various Irradiance Models in Detecting Soiling of Irradiance Sensors

We evaluate the feasibility of using various clear-sky models or purchased satellite data for estimating the soiling of a reference cell irradiance sensor. We find results to be more accurate for models that consider local meteorological conditions. We conclude that given the data sets considered, and depending on the requirements of the data analyst, choosing to use purchased satellite irradiance data from Solargis to estimate the soiling of a reference cell sensor tends to yield more accurate results, although there are instances where a clear-sky model performs better. The SOLIS clear-sky model in PVLIB with variable P wat provided useful soiling results, implying that the general method of using a clear-sky model with local meteorological data may provide a low-cost tool for detecting soiling of irradiance sensors.

14 SOLAR ENERGY↗