Engineering Papers⌕ Search

Engineering topics

DeGraw, Jason

Publications and source records attributed to DeGraw, Jason.

28 records · Page 2

AirflowNetwork [SWR 19-45]

The AirflowNetwork software provides the ability to simulate air movement and the resulting transport of contaminants and other materials within a building. The performance of air distribution systems, including supply and return leaks, and multizone airflows driven by outdoor wind and forced air during HVAC system operation are simulated using a nodal network representation of the building. The pressure network model implemented here is based on George Walton's AIRNET and was modified for inclusion in the EnergyPlus building energy modeling software. The algorithm were then extracted from EnergyPlus into a stand-alone package to facility use without the building energy model and more extensive testing and validation of the underlying operations.

DeGraw, Jason↗

skyline

skyline is a header-only C++ library for the direct solution of linear algebraic equations that are stored in skyline format. It is intended for medium-sized sparse problems with moderate bandwidth. This solution approach has historically been used for pressure network solvers and in some finite element codes. It was developed to replace legacy solver code included in the EnergyPlus building energy modeling software package, but is not limited to use by EnergyPlus.

DeGraw, Jason↗

View3D

This is View3D, version 3.2, a C program for the computation of geometric view factors. This version of View3D is included as part of the EnergyPlus installer package. The program utilizes a number of integration techniques to compute view factors between planar triangles or quadrilaterals in three dimensions.

DeGraw, Jason↗

BuildingSync® [SWR-18-28]

BuildingSync® is a standardized language for commercial building energy audit data that software developers can use to exchange data between audit tools. Taking the form of an XML schema, BuildingSync can be required by building owners and audit program managers to allow data analysis and aggregation across multiple buildings in order to evaluate program performance and analyze trends. BuildingSync was developed using the standard energy data terminology defined in the Building Energy Data Exchange Specification (BEDES). BuildingSync is one of the first implementations of BEDES Version 1.0, and it was developed in close collaboration with the BEDES working groups. BuildingSync standardizes the format of the energy audit data itself. It is not intended to standardize the calculations performed on these data by engineers, analysts, software packages, or other audit tools. For more, see: https://buildingsync.net/

Long, Nicholas↗

BuildingSync® v.2.5.0 2024 [SWR-18-28]

BuildingSync® is a building data exchange schema to better enable integration between software tools and building data workflows. The schema's original use case was focused on commercial building energy audits; however, several additional use cases have been realized including building energy modeling and more high-level generic building data exchange. BuildingSync helps streamline the data exchange process, improving the value of the data, minimizing duplication of effort for subsequent building data collection efforts (including audits), and facilitating the achievement of greater energy efficiency. This in done in part by standardizing on (a) reporting audits in an electronic format, (b) tracking proposed, implemented, and discarded energy conservation measures, and (c) storing building characteristics (at multiple levels) for audits, benchmarking, and building energy analysis. BuildingSync has several documents and tools available to help users understand how to best leverage BuildingSync. The list below are only a subset of the resources available. If new resources are discovered, then feel free to create a new pull request with the additions. Generic BuildingSync information is available on the DOE website and the project website. BuildingSync Examples - These examples are kept up to date and show a wide range of implementations. Any new update to BuildingSync is required to pass validation on these example files. BuildingSync Use Case Validator allows for users to determine if their instance complies with a specific use case for BuildingSync by checking if the required elements are implemented in an uploaded instance. An API is also provided for automated integration into other tools. Also, the website contains an easy way to view the entirety of the schema and how elements relate to the Building Exchange Data Exchange Specification. The Validator is open sourced here Use Case TestSuite provides a Python package for easier generation of BuildingSync use cases. BuildingSync use cases depend on the generation of schematron documents, which is time-consuming and difficult to implement well. The TestSuite allows users to define a use case using a more palatable CSV template, which it then turns into a Schematron document. The source code is available here. BuildingSync to OpenStudio/EnergyPlus. The translator is open sourced here. This project will translate a Level 1 (and partial Level 2) ASHRAE Energy Audit to a fully defined OpenStudio and EnergyPlus model. This project is in early Beta testing and any feedback is welcome!

Long, Nicholas↗

BRICR v0.2.0 (BayREN Integrated Commercial Retrofits) [SWR 18-33]

BRICR is software for translating NREL's BuildingSync™ XML (BSXML) to OpenStudio® Workflow (OSW) files for simulation. Each BSXML contains information about a building as well as multiple possible energy efficiency upgrade options. An OSW file is created and run for each possible efficiency upgrade, the results of all simulations are stored in BSXML format. BRICR was jointly developed by NREL and LBNL for the San Francisco BayREN: Integrated Commercial Retrofits (BRICR) project funded under the DOE solicitation "Solutions to Improve the Energy Efficiency of U.S. Small and Medium Commercial Buildings (DE-FOA-0001385)": https://www.energy.gov/eere/buildings/downloads/san-francisco-bayren-integrated-commercial-retrofits

Macumber, Dan↗

BRICR [SWR 18-33]

BRICR is software for translating NREL's BuildingSync™ XML (BSXML) to OpenStudio® Workflow (OSW) files for simulation. Each BSXML contains information about a building as well as multiple possible energy efficiency upgrade options. An OSW file is created and run for each possible efficiency upgrade, the results of all simulations are stored in BSXML format. BRICR was jointly developed by NREL and LBNL for the San Francisco BayREN: Integrated Commercial Retrofits (BRICR) project funded under the DOE solicitation "Solutions to Improve the Energy Efficiency of U.S. Small and Medium Commercial Buildings (DE-FOA-0001385)": https://www.energy.gov/eere/buildings/downloads/san-francisco-bayren-integrated-commercial-retrofits

Macumber, Dan↗

OPENSTUDIO® [SWR-07-40]

OpenStudio® is a cross-platform (Windows, Mac, and Linux) collection of software tools to support whole building energy modeling using EnergyPlus and advanced daylight analysis using Radiance. OpenStudio is an open source (LGPL) project to facilitate community development, extension, and private sector adoption. OpenStudio includes graphical interfaces along with a Software Development Kit (SDK). In addition to the graphical interface, OpenStudio allows building researchers and software developers to quickly get started through its multiple entry levels, including access through C++, Ruby, and C#. Users can leverage the Ruby interface to create OpenStudio Measures that can be easily shared and applied to OpenStudio Models. OPENSTUDIO® IS A REGISTERED TRADEMARK OF ALLIANCE FOR SUSTAINABLE ENERGY, LLC, THE MANAGER AND OPERATOR OF THE NATIONAL RENEWABLE ENERGY LABORATORY.

Ball, Brian↗

OpenStudio® Resources [SWR-07-40]

This repository includes a suite of simulation tests that can be used to validate new OpenStudio® model objects as well as ensure that objects continue to work after they are added. Each new OpenStudio Model object should ideally have two simulation tests associated with it: - a Ruby one which verifies the Ruby API and, - an OSM one that verifies the OSM file can be loaded with future versions of OpenStudio. Both tests should result in a simulation-ready OpenStudio Model that can be simulated using EnergyPlus®. Both of these tests are located in the /model/simulationtests directory, the easiest way to add a new test is to find a related existing test and modify it. When new tests are added they must be added to the model_tests.rb file.

Benne, Kyle↗

Automatic building information model query generation

Energy efficient building design and construction calls for extensive collaboration between different subfields of the Architecture, Engineering and Construction (AEC) community. Performing building design and construction engineering raises challenges on data integration and software interoperability. Using Building Information Modeling (BIM) data hub to host and integrate building models is a promising solution to address those challenges, which can ease building design information management. However, the partial model query mechanism of current BIM data hub collaboration model has several limitations, which prevents designers and engineers to take advantage of BIM. To address this problem, we propose a general and effective approach to generate query code based on a Model View Definition (MVD). This approach is demonstrated through a software prototype called QueryGenerator. In conclusion, by demonstrating a case study using multi-zone air flow analysis, we show how our approach and tool can help domain experts to use BIM to drive building design with less labour and lower overhead cost.

97 MATHEMATICS AND COMPUTING↗