Engineering topics

De Angelis, R. J.

Publications and source records attributed to De Angelis, R. J..

4 records

NASA NTRS1987

Dislocation dynamics and the viscoplastic buckling of dendritic web type silicon ribbon

The effect of dendrites (reinforced edges) on the residual stresses, dislocation densities and buckling behavior during growth of web type silicon ribbon is studied. A viscoplastic material response function (Haasen-Sumino model) is used to calculate the stresses and the disloction density at each point in the silicon ribbon. In addition, the role of dendrites on the viscoplastic buckling behavior of the ribbon is investigated. The critical thicknesses, the corresponding deflection shapes and lateral deflection speeds are calculated. These results are then compared with similar data obtained for flat plates.

Tsai, C. T.↗

NASA NTRS1987

Dislocation dynamics of web type silicon ribbon

Silicon ribbon grown by the dendritic web process passes through a rapidly changing thermal profile in the growth direction. This rapidly changing profile induces stresses which produce changes in the dislocation density in the ribbon. A viscoplastic material response function (Haasen-Sumino model) is used herein to calculate the stresses and the dislocation density at each point in the silicon ribbon. The residual stresses are also calculated.

Dillon, O. W., Jr.↗

NASA NTRS1986

Dislocation dynamics during the growth of silicon ribbon

The thermal viscoplastic stresses and the dislocation densities in silicon ribbon are computed for an axially changing thermal profile by using an iterative finite difference method. A material constitutive equation (Haasen-Sumino model) which involves an internal variable (mobile dislocation density) is used. The results are interpreted as showing that there is a maximum width of silicon ribbon that can be grown when viscoplasticity and dislocations are considered. This maximum width limitation does not exist if the material behavior is elastic.

Dillon, O. W., Jr.↗

NASA NTRS1978

Structure development in silicon sheet by shaped crystallization

Models are presented for the development of a parallel twinned structure of the 110 plane type and the 112 line type in silicon ribbons. The models are believed to be mutually compatible and operable. The first model relates the requirements for super-cooling during crystallization. The existence of reentrant angles associated with the twin structure is proposed to provide a rough interface to reduce super-cooling. The spacing of the twins is proposed to be limited by the geometrical relationship between the thermal gradient in the liquid and the dimensions of the twinned crystallization front. The second model relates the thermal stress configuration to detail dislocation reactions which would be expected to develop twins. While a specific dislocation mechanism cannot yet be defined, a number of alternatives are presented. All of these various dislocation mechanisms would result in the observed crystalline configuration and the choice among them is not critical.

Leipold, M. H.↗