Engineering Papers⌕ Search

Engineering topics

Davis, R. H.

Publications and source records attributed to Davis, R. H..

IUTAM symposium on hydrodynamic diffusion of suspended particles

Hydrodynamic diffusion refers to the fluctuating motion of nonBrownian particles (or droplets or bubbles) which occurs in a dispersion due to multiparticle interactions. For example, in a concentrated sheared suspension, particles do not move along streamlines but instead exhibit fluctuating motions as they tumble around each other. This leads to a net migration of particles down gradients in particle concentration and in shear rate, due to the higher frequency of encounters of a test particle with other particles on the side of the test particle which has higher concentration or shear rate. As another example, suspended particles subject to sedimentation, centrifugation, or fluidization, do not generally move relative to the fluid with a constant velocity, but instead experience diffusion-like fluctuations in velocity due to interactions with neighboring particles and the resulting variation in the microstructure or configuration of the suspended particles. In flowing granular materials, the particles interact through direct collisions or contacts (rather than through the surrounding fluid); these collisions also cause the particles to undergo fluctuating motions characteristic of diffusion processes. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

Diffusion↗

IUTAM Symposium on Hydrodynamic Diffusion of Suspended Particles

The focus of the symposium was on multiparticle hydrodynamic interactions which lead to fluctuating motion of the particles and resulting particle migration and dispersion or diffusion. Implications of these phenomena were described for sedimentation, fluidization, suspension flows, granular flows, and fiber suspensions. Computer simulation techniques as well as experimental techniques were described. Each session had an invited leadoff talk which overviewed the session topic as well as described the speaker's own related research. Ample time for discussion was included after each talk as well as at the end of each session. The symposium started with a keynote talk on the first evening on What is so puzzling about hydrodynamic diffusion?, which set the tone for the rest of the meeting by emphasizing both recent advances and unanswered issues.

Davis, R. H.↗

Modeling of collision and coalescence of droplets during microgravity processing of Zn-Bi immiscible alloys

A population balance model is presented for the coarsening of the dispersed phase of liquid-liquid two-phase mixtures in microgravity due to gravity sedimentation and Marangoni migration, which lead to the collision and coalescence of droplets. The model is used to predict the evolution of the size distribution of the dispersed phase in a liquid-phase miscibility gap system, Zn-Bi, which has been used in a number of experimental microgravity processing studies in which significant phase segregation has been observed. The analysis shows that increasing the temperature gradient, gravity level, volume fraction of the dispersed phase, initial average drop radius, initial standard deviation of droplet radii, or the temperature coefficient of the interfacial tension leads to an increase in the rate of droplet growth due to collision and coalescence. Comparison of the distribution evolutions for unimodal and bimodal initial distributions shows that the latter yield significantly more rapid droplet growth. Finally, it is shown that droplet growth can be dramatically reduced with antiparallel orientation of the gravity vector and the temperature gradient, provided that the relative magnitude of these two vectors is properly chosen.

Davis, R. H.↗

Rotorcraft contingency power study

Twin helicopter engines are often sized by the power requirement of a safe mission completion after the failure of one of the two engines. This study was undertaken for NASA Lewis by General Electric Co. to evaluate the merits of special design features to provide a 2-1/2 Contingency Power rating, permitting an engine size reduction. The merits of water injection, turbine cooling airflow modulation, throttle push, and a propellant auxiliary power plant were evaluated using military Life Cycle Cost (LCC) and commercial helicopter Direct Operating Cost (DOC) merit factors in a rubber engine and a rubber aircraft scenario.

Hirschkron, R.↗

Contingency power concepts for helicopter turboshaft engine

Twin helicopter engines are often sized by power requirement of safe mission completion after the failure of one of the two engines. This study was undertaken for NASA Lewis by General Electric Co. to evaluate the merits of special design features to provide a 2-1/2 minute Contingency Power rating, permitting an engine size reduction. The merits of water injection, cooling flow modulation, throttle push and an auxiliary power plant were evaluated using military life cycle cost (LCC) and commercial helicopter direct operating cost (DOC) merit factors in a rubber engine/rubber aircraft scenario.

Hirschkron, R.↗

Contingency power concepts for helicopter turboshaft engine

Twin helicopter engines are often sized by power requirement of safe mission completion after the failure of one of the two engines. This study was undertaken for NASA Lewis by General Electric Co. to evaluate the merits of special design features to provide a 2-1/2 minute Contingency Power rating, permitting an engine size reduction. The merits of water injection, cooling flow modulation, throttle push and an auxiliary power plant were evaluated using military life cycle cost (LCC) and commercial helicopter direct operating cost (DOC) merit factors in a rubber engine/rubber aircraft scenario.

Hirschkron, R.↗