Engineering PapersSearch

Engineering topics

Davis, M.

Publications and source records attributed to Davis, M..

Laser Frequency Stabilization for GRACE-II

The GRACE mission monitors changes in the Earth's gravity field by measuring changes in the distance between spacecraft induced by that changing field. The distance variation is measured with a microwave ranging system with sub-micron accuracy. The ranging measurement accuracy is limited by the signal-to-noise ratio and by the frequency stability of the microwave signal referenced to an ultra-stable oscillator (USO). For GRACE-2 a laser ranging system is envisioned with accuracy better than the GRACE microwave ranging system. A laser ranging system easily provides an improved signal-to-noise ratio over the microwave system. Laser frequency stability better than the GRACE USO stability has been demonstrated in several laboratories using thermally stabilized optical cavities. We are developing a space-qualifiable optical cavity and associated optics and electronics for use on GRACE-2 to provide a stable frequency reference for the laser ranging system. Two breadboard units have been developed and tested for performance and ability to survive launch and orbit environments. A prototype unit is being designed using lessons learned from tests of the breadboard units.

Earth gravity

Building a GPS Receiver for Space Lessons Learned

Over the past 4 years the Component Systems and Hardware branch at NASA GSFC has pursued an inhouse effort to build a unique space-flight GPS receiver. This effort has resulted in the Navigator GPS receiver. Navigator's first flight opportunity will come with the STS-125 HST-SM4 mission in August 2008. This paper covers the overall hardware design for the receiver and the difficulties encountered during the transition from the breadboard design to the final flight hardware design. Among the different lessons learned, the paper stresses the importance of selecting and verifying parts that are appropriate for space applications, as well as what happens when these parts are not accurately characterized by their datasheets. Additionally, the paper discusses what analysis needs to be performed when deciding system frequencies and filters. The presentation also covers how to prepare for thermal vacuum testing, and problems that may arise during vibration testing. It also contains what criteria should be considered when determining which portions of a design to create in-house, and which portions to license from a third party. Finally, the paper shows techniques which have proven to be extraordinarily helpful in debugging and analysis.

Sirotzky, Steve

A Cepheid Distance to NGC 4603 in the Centaurus Cluster

In an attempt to use Cepheid variables to determine the distance to the Centaurus cluster, we have obtained images of NGC 4603 with the Hubble Space Telescope for 9 epochs (totalling 24 orbits) over 14 months in the F555W filter and 2 epochs (totalling 6 orbits) in the F814W filter.

Cepheids distance redshifs large scale structure o

Effects of Space Flight on Ovarian-Hypophyseal Function in Postpartum Rats

The effect of space flight in a National Aeronautics and Space Administration (NASA) shuttle was studied in pregnant rats. Rats were launched on day 9 of gestation and recovered on day 20 of gestation. On day 20 of gestation, rats were unilaterally hysterectomized and subsequently allowed to go to term and deliver vaginally. There was no effect of space flight on pituitary and ovary mass postpartum. In addition, space flight did not alter healthy and atretic ovarian antral follicle populations, fetal wastage in utero, plasma concentrations of progesterone and luteinizing hormone (LH) or pituitary content of follicle stimulating hormone (FSH). Space flight significantly increased plasma concentrations of FSH and decreased pituitary content of LH at the postpartum sampling time. Collectively, these data show that space flight, initiated during the postimplantation period of pregnancy, and concluded before parturition, is compatible with maintenance of pregnancy and has minimal effects on postpartum hypophyseal parameters; however, none of the ovarian parameters examined was altered by space flight.

Burden, H. W.

Photorefractivity in a Titanium Doped ZnCdTe Crystal

Single crystals of Zn(.04)Cd(.96)Te was grown by horizontal physical vapor transport (PVT) method and doped by annealing with TiTe2 powder at 600 C for six days. Photorefractive two-beam coupling, along with photoluminescence and absorption spectroscopy, were used to characterize the ZnCdTe:Ti crystal. At 1.32 micrometers, the photorefractive gain has been measured as a function of the grating period. A gain of about 0.16/cm was obtained at an intensity of about 0.1 W/sq cm. The results of this titanium doped ZnCdTe crystal are compared to that of vanadium-doped CdTe crystals reported previously.

Davis, M.

Dynamic spectra of radio bursts from flare stars

The Arecibo 305 m telescope has been used to observe radio bursts from flare stars at 430 and 1415 MHz. Dynamic spectra of the emission with bandwidths of 10 MHz in the former case and 40 MHz in the latter are recorded. For AD Leo, the microwave burst emission was 100 percent right circularly polarized, achieved brightness temperatures near 10 to the 16th K, was generally broadband in character, but was superposed with finite structures in both frequency and time. Quasi-periodic pulsations were clearly present as well as a sudden reduction feature. For YZ CMi, the emission was 100 percent left circularly polarized and was relatively broadband with fine structures. Instabilities driven by anisotropies in the electron distribution, particularly the loss-cone distribution, are considered to account for the coherent radiation.

Bastian, T. S.

Dependence of millimeter wave surface resistance on the deposition parameters of laser ablated YBa2Cu3O(x) thin films

Measurements of millimeter-wave surface resistance versus temperature have been performed for YBa2Cu3O(x) thin films on 100 line-type SrTiO(3) substrates using a TE(011) cylindrical copper cavity at 80 GHz. The 0.6-micron thick films were grown at several deposition temperatures in the range 690 C to 810 C by means of a pulsed excimer laser ablation technique. A surface resistance minimum (60 milliohm at 77 K) near 770 C is shown to correlate with a minimum in c-axis lattice parameter (11.72 A). The highest value of Tc also occurs near this temperature. The surface resistance of films deposited at 790 C on 110 line-type LaAlO3 subtrates is lower, reaching 8 milliohm at 98 GHz and 80 K, demonstrating the influence of substate material on film quality.

Wosik, J.

Massive superclusters as a probe of the nature and amplitude of primordial density fluctuations

It is pointed out that correlation studies of galaxy positions have been widely used in the search for information about the large-scale matter distribution. The study of rare condensations on large scales provides an approach to extend the existing knowledge of large-scale structure into the weakly clustered regime. Shane (1975) provides a description of several apparent massive condensations within the Shane-Wirtanen catalog, taking into account the Serpens-Virgo cloud and the Corona cloud. In the present study, a description is given of a model for estimating the frequency of condensations which evolve from initially Gaussian fluctuations. This model is applied to the Corona cloud to estimate its 'rareness' and thereby estimate the rms density contrast on this mass scale. An attempt is made to find a conflict between the density fluctuations derived from the Corona cloud and independent constraints. A comparison is conducted of the estimate and the density fluctuations predicted to arise in a universe dominated by cold dark matter.

Kaiser, N.

The evolution of large-scale structure in a universe dominated by cold dark matter

The results of numerical simulations of nonlinear gravitational clustering in universes dominated by weakly interacting, 'cold' dark matter are presented. The numerical methods used and the way in which initial conditions were generated are described, and the simulations performed are catalogued. The evolution of the fundamental statistical properties of the models is described and their comparability with observation is discussed. Graphical comparisons of these open models with the observed galaxy distribution in a large redshift survey are made. It is concluded that a model with a cosmological density parameter omega equal to one is quite unacceptable if galaxies trace the mass distribution, and that models with omega of roughly two, while better, still do not provide a fully acceptable match with observation. Finally, a situation in which galaxy formation is suppressed except in sufficiently dense regions is modelled which leads to models which can agree with observation quite well even for omega equal to one.

Davis, M.

Numerical techniques for large cosmological N-body simulations

Techniques for carrying out large N-body simulations of the gravitational evolution of clustering in the fundamental cube of an infinite periodic universe are described and compared. The accuracy of the forces derived from several commonly used particle mesh schemes is examined, showing how submesh resolution can be achieved by including short-range forces between particles by direct summation techniques. The time integration of the equations of motion is discussed, and the accuracy of the codes for various choices of 'time' variable and time step is tested by considering energy conservation as well as by direct analysis of particle trajectories. Methods for generating initial particle positions and velocities corresponding to a growing mode representation of a specified power spectrum of linear density fluctuations are described. The effects of force resolution are studied and different simulation schemes are compared. An algorithm is implemented for generating initial conditions by varying the number of particles, the initial amplitude of density fluctuations, and the initial peculiar velocity field.

Efstathiou, G.

The size of clusters in a neutrino-dominated universe

Quite soon after the first collapse of structure, almost half the matter in a neutrino-dominated universe is expected to reside in clusters. The masses and binding energies of these neutrino clusters are too large for them to be identified with observed galaxy clusters. Even if such objects were able to suppress all galaxy formation, their X-ray emission would, however, make them highly visible if more than 2.5 percent of their mass was in ordinary matter. Such a low baryon density leads to insuffient cooling for galaxies to form in pancakes. A neutrino-dominated universe appears to conflict with observation irrespective of the details of the processes which govern galaxy formation.

White, S. D. M.

The center for astrophysics redshift survey

Major advances in the art of redshift measurements have improved the obtainable accuracy to better than 30 km/s. It is now posible to obtain a redshift for almost any galaxy brighter than 15th magnitude on a 60-inch telescope in 60 minutes or less. These advances were utilized in an observation program initiated in the spring of 1978. This program represents a survey of radial velocities for all 2400 galaxies brighter than 14.5 at high galactic latitude in the northern hemisphere. The obtained data set has been employed as a basis for a derivation of a good measure of the local mean mass density. In addition, information was obtained concerning the overdensity and the dynamics of the local supercluster, and an analysis was conducted of the dynamics of groups and clusters of galaxies within the sample volume.

Davis, M.

Dielectronic recombination rates, ionization equilibrium, and radiative emission rates for calcium and nickel ions in low-density high-temperature plasmas

The total dielectronic recombination rates for Ca and Ni ions were calculated taking into account autoionization to excited states of the recombining ion and stabilizing radiative transitions of the recombining electron. Radiative transitions of the recombining ion are found to be the dominant stabilizing processes, and the relative importance of Delta n = 0 and Delta n not equal to 0 transitions in the relevant temperature region is determined for each ion. The relative importance of the Delta n = 0 and Delta n not equal to 0 contributions is significantly altered for some ions by the inclusion of autoionization to excited levels. The relative abundance of the various ionization stages has been determined by using a corona equilibrium model in which collisional ionization and inner-shell excitation followed by autoionization are balanced by direct radiative and dielectronic recombination.

Jacobs, V. L.

HEAO 1 identification of the X-ray emitting poor cluster of galaxies, AWM 7

The X-ray source 2A 0251 + 413 is identified with the AWM 7 group of galaxies. The source is extended, with a FWHM of roughly 9 arcmin if an isothermal sphere profile is assumed. The spectrum is best fitted by thermal bremsstrahlung at 4.0 + or - 0.5 keV, with a significant Fe line emission of equivalent width 0.63 keV centered at 6.6 keV. This temperature is consistent with a measured dispersion velocity of 600 km/s of the central galaxies.

Schwartz, D. A.

Contribution of intermediate luminosity X-ray galaxies to the background - Anon 0945-30

Evidence that the galaxy A0945-30 is a new extragalactic X-ray source was found from an analysis of rotating modulation collimator quick-look data collected from the SAS 3 X-ray observatory. A strong piece of evidence was the hydrogen column density of 3 plus or minus 1 times 10 to the 22nd power per sq cm for a power law spectrum extending to about 35 keV inferred from HEAO 1 data. Observations indicate that the galaxy is an early type spiral with a bright nucleus. A faint star alongside the galaxy within the 90% confidence X-ray source error circle is an F dwarf with no indication of emission features. Spectra of the galaxy in the red and blue show sharp, intermediate strength emission lines of forbidden O III, forbidden N II, and H-alpha together with strong Mg, Fe, Ca absorption features characteristic of a normal stellar continuum in the galactic nucleus.

Schnopper, H. W.

An Atmospheric Cloud Physics Laboratory for the Space Laboratory

Results of research and engineering analyses to date show that it is feasible to develop and fly on the first Spacelab mission a multipurpose laboratory in which experiments can be performed on the microphysical processes in atmospheric clouds. The paper presents a series of tables on the Atmospheric Cloud Physics Laboratory, with attention given to experiment classes, the preliminary equipment list (particle generators, optical and imaging devices, particle detectors and characterizers, etc.), initial equipment (scientific equipment subsystems and flight support subsystems), and scientific functional requirements (the expansion chamber, the continuous flow diffusion chamber, the static diffusion chamber, the humidifier, and particle generators).

Smith, R.