Engineering Papers⌕ Search

Engineering topics

Daniel, Claus

Publications and source records attributed to Daniel, Claus.

118 records · Page 7

Wetting Behavior of Laser Synthetic Surface Micro Textures on Ti-6Al-4V for Bioapplication

Wettability at the surface of an implant material play a key role in its success as it modulate the protein adsorption and thereby influences cell attachment and tissue integration at the interface. Hence, surface engineering of implantable materials to enhance wettability to physiological fluid under in vivo conditions is an area of active research. In light of this, in the present work a laser based optical interference and direct melting techniques were used to develop synthetic micro textures on Ti-6Al-4V alloys and their effects on wettability were systematically studied. Improved wettability to simulated body fluid and distilled water was observed for the Ca-P coatings obtained by direct melting technique. This superior wettability was attributed to both the appropriate surface chemistry and three dimensional surface features obtained using this technique. To assert a better control on surface texture and wettability a three dimensional thermal model based on COMSOL sTM multiphysics was employed to predict the features obtained by laser melting technique. The effect of physical texture and wetting on biocompatibility of laser processed Ca-P coating was evaluated in the preliminary efforts on culturing of mouse MC3T3-E1 osteoblast cells.

36 MATERIALS SCIENCE↗

Understanding the Degredation of Silicion Electrodes for Lithium Ion Batteries Using Acoustic Emission

Silicon is a promising anode material for lithium ion battery application due to its high specific capacity, low cost, and abundance. However, when silicon is lithiated at room temperature it can undergo a volume expansion in excess of 280% which leads to extensive fracturing. This is thought to be a primary cause of the rapid decay in cell capacity routinely observed. Acoustic emission (AE) was employed to monitor activity in composite silicon electrodes while cycling in lithium ion half-cells using a constant current-constant voltage procedure. The major source of AE was identified as the brittle fracture of silicon particles resulting from the alloying reaction that gives rise to LixSi phases. The largest number of emissions occurred on the first lithiation corresponding to surface fracture of the silicon particles, followed by distinct emission bursts on subsequent charge and discharge steps. Furthermore, a difference in the average parameters describing emission during charge and discharge steps was observed. Potential diagnostic and materials development applications of the presented AE techniques are discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Materials Processing for Lithium-Ion Batteries

Extensive efforts have been undertaken to develop and optimize new materials for lithium-ion batteries to address power and energy demands of mobile electronics and electric vehicles. However, the introduction of large-format lithium-ion batteries is hampered by high cost, safety concerns, and deficiencies in energy density and calendar life. Advanced materials-processing techniques can contribute solutions to such issues. From that perspective, this work summarizes the materials-processing techniques used to fabricate the cathodes, anodes, and separators used in lithium-ion batteries.

25 ENERGY STORAGE↗

Laser process effects on physical texture and wetting in implantable Ti-alloys

Wetting is an important aspect for implantable biomaterials, as it affects the initial interaction with physiological fluids, which in turn dictates the protein adsorption, cell attachment, and tissue integration at the interface. In light of this in the present overview, surface engineering techniques based on laser processing of implantable titanium alloys for improved wettability and cell compatibility is discussed. Here three different laser processing techniques, laser interference patterning, continuous wave laser direct melting, and pulsed laser direct melting and the influence of each type of processing on the micro-texture evolution are studied Finally, the effect of micro-textures on the wettability and thereby its in vitro bioactivity and in vitro biocompatibility is systematically discussed.

Sammer, Paul↗

ORNL Laboratory Directed Research and Development Program FY 2008 Annual Report

The Oak Ridge National Laboratory (ORNL) Laboratory Directed Research and Development (LDRD) Program reports its status to the U.S. Department of Energy (DOE) in March of each year. The program operates under the authority of DOE Order 413.2B, “Laboratory Directed Research and Development” (April 19, 2006), which establishes DOE’s requirements for the program while providing the Laboratory Director broad flexibility for program implementation. LDRD funds are obtained through a charge to all Laboratory programs. This report includes summaries all ORNL LDRD research activities supported during FY 2008. The associated FY 2008 ORNL LDRD Self-Assessment (ORNL/PPA-2008/2) provides financial data and an internal evaluation of the program’s management process.

08 HYDROGEN↗

Computational Approach to Photonic Drilling of Silicon Carbide

The ability of lasers to carry out drilling processes in silicon carbide ceramic was investigated in this study. A JK 701 pulsed Nd:YAG laser was used for drilling through the entire depth of silicon carbide plates of different thicknesses. The laser parameters were varied in different combinations for a well controlled drilling through the entire thickness of the SiC plates. A drilling model incorporating effects of various physical phenomena such as decomposition, evaporation induced recoil pressure, and surface tension was developed. Such comprehensive model was capable of advance prediction of the energy and time required for drilling a hole through any desired depth of material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Materials and Processing for Lithium-Ion batteries

Lithium ion battery technology is projected to be the leapfrog technology for the electrification of the drivetrain and to provide stationary storage solutions to enable the effective use of renewable energy sources. The technology is already in use for low-power applications such as consumer electronics and power tools. Extensive research and development has enhanced the technology to a stage where it seems very likely that safe and reliable lithium ion batteries will soon be on board hybrid electric and electric vehicles and connected to solar cells and windmills. However, safety of the technology is still a concern, service life is not yet sufficient, and costs are too high. This paper summarizes the state of the art of lithium ion battery technology for nonexperts. It lists materials and processing for batteries and summarizes the costs associated with them. This paper should foster an overall understanding of materials and processing and the need to overcome the remaining barriers for a successful market introduction.

14 SOLAR ENERGY↗

Controlled Evolution of Morphology and Microstructure in Laser Interference-Structured Zirconia

Tape-cast pseudo-cubic zirconia pellets were surface irradiated by two coherent interfering high-power short-pulse Nd:YAG laser beams. The interfering beams of the third harmonic with a wavelength of 355 nm of a 2.5-ns Q-switched laser produced a line-like intensity distribution with a periodic distance of 3.3 m due to the selected angle between the beams. The resulting nonuniform surface heating produced a microstructure consisting of ultrafine-grained zirconia with a grain size of about 10 nm within the top 100 200 nm depth of the treated surface region due to the high cooling rates during short-pulse laser processing (up to 10^10 K/s). The surface morphology closely followed the microperiodic heat treatment provided by the interfering laser beams. The pore size distribution within the periodic surface morphology ranged from a few nanometers to a maximum of half of the periodic line distances.

36 MATERIALS SCIENCE↗

Improving flexural strength of dental restorative ceramics using laser interference direct structuring

Zirconia and alumina ceramics restorative materials were treated with laser interference direct structuring using the third harmonic of a short pulse Nd:YAG and tested in a three-point bending test to measure the flexural strength. The surface was restructured in a periodic line like pattern with controlled surface porosity and a surface composite pattern. The composite consist of two different defect states rather than different phase compositions. The resulting mechanical properties are a function of the number of laser pulses, laser energy, and angle in between the laser beams defining the periodic feature distance. This composite effect is comparable with a laminate showing increasing stiffness with decreasing layer thickness. The material s fracture strength could be controlled through the three mentioned laser parameters and in an initial study significantly improved by up to 50% from initial 422 MPa to 630 MPa for alumina and 833 MPa to 1250 MPa for zirconia.

36 MATERIALS SCIENCE↗

Electrokinetic Delivery of Single Fluorescent Biomolecules in Fluidic Nanochannels

We describe the fabrication of sub-100-nanometer-sized channels in a fused silica lab-on-a-chip device and experiments that demonstrate detection of single fluorescently labeled proteins in buffer solution within the device with high signal and low background. The fluorescent biomolecules are transported along the length of the nanochannels by electrophoresis and/or electro-osmosis until they pass into a two-focus laser irradiation zone. Pulse-interleaved excitation and time-resolved single-photon detection with maximum-likelihood analysis enables the location of the biomolecule to be determined. Diffusional transport of the molecules is found to be slowed within the nanochannel, and this facilitates fluidic trapping and/or prolonged measurements on individual biomolecules. Our goal is to actively control the fluidic transport to achieve rapid delivery of each new biomolecule to the sensing zone, following the completion of measurements, or the photobleaching of the prior molecule. We have used computer simulations that include photophysical effects such as triplet crossing and photobleaching of the labels to design control algorithms, which are being implemented in a custom field-programmable-gate-array circuit for the active fluidic control.

59 BASIC BIOLOGICAL SCIENCES↗