Engineering PapersSearch

Engineering topics

Daniel G Murri

Publications and source records attributed to Daniel G Murri.

NASA Engineering and Safety Center Technical Bulletin No. 21-02: Genesis Flight Mechanics Simulation

Genesis Flight Mechanics Simulation The NASA Engineering and Safety Center (NESC) consolidated and modernized a suite of legacy flight mechanics simulations, including the Flight Analysis and Simulation Tool (FAST), resulting in Genesis, a generic, multi-vehicle, variable-degree-of-freedom flight mechanics simulation for ascent, aerocapture, entry, descent, and landing (A2EDL) trajectory design. Genesis is more flexible, capable, and performant than FAST. It enables trajectory optimization and interactive trajectory generation. Its interoperability with Copernicus, an exo-atmospheric and interplanetary trajectory design tool, facilitates end-to-end trajectory optimization across all mission phases. Genesis is implemented in Julia, a new language for technical computing that combines the ease of use of scripting languages with the run-time performance of compiled languages.

EDL

Improvements to the Flight Analysis and Simulation Tool (FAST) and Initial Development of the Genesis Flight Mechanics Simulation for Ascent, Aerocapture, Entry, Descent, and Landing (A2EDL) Trajectory Design

The NASA Engineering and Safety Center (NESC) was requested to provide significant enhancements to the Flight Analysis and Simulation Tool (FAST), a generic, variable-degree-of-freedom, multi-body ascent, aerocapture, entry, descent, and landing (A2EDL) flight simulation code and a key Agency analysis tool. This report details the upgrades to FAST that were completed, describes a change to the assessment’s scope that allowed its goals to be exceeded with a new and innovative approach, and discusses the results of the modified approach.

NASA Engineering and Safety Center; Flight Analysi

Forebody Flow Visualization on the F-18 HARV with Actuated Forebody Strakes

Off-surface smoke flow visualization and extensive pressure measurements were obtained on the forebody of the NASA F-18 High Alpha Research Vehicle equipped with actuated forebody strakes. Test points at alpha = 50 deg. were examined in which only one strake was deflected or in which both strakes were deflected differentially. The forebody pressures were integrated to obtain forebody yawing moments. Results showed that small single strake deflections can cause an undesirable yawing moment reversal. At alpha = 50 deg., this reversal was corrected by deploying both strakes at 20 deg. initially, then differentially from 20 deg. to create a yawing moment. The off-surface flow visualization showed that in the case of the small single strake deflection, the resulting forebody/strake vortex remained close to the surface and caused accelerated flow and increased suction pressures on the deflected side. When both strakes were deflected differentially, two forebody/strake vortices were present. The forebody/strake vortex from the larger deflection would lift from the surface while the other would remain close to the surface. The nearer forebody/strake vortex would cause greater flow acceleration, higher suction pressures and a yawing moment on that side of the forebody. Flow visualization provided a clear description of the strake vortices fluid mechanics.

David F Fisher

High Alpha Technology Program (HATP) ground test to flight comparisons

This status paper reviews the experimental ground test program of the High Alpha Technology Program (HATP). The reasons for conducting this ground test program had their origins during the 1970's when several difficulties were experienced during the development programs of both the F-18 and F-16. A careful assessment of ground test to flight correlations appeared to be important for reestablishing a high degree of confidence in our ground test methodology. The current paper will then focus on one aspect of the HATP program that is intended to improve the correlation between ground test and flight, high-alpha gritting. The importance of this work arises from the sensitivity of configurations with smooth-sided forebodies to Reynolds number. After giving examples of the effects of Reynolds number, the paper will highlight efforts at forebody gritting. Finally, the paper will conclude by summarizing the charter of the HATP Experimental Aerodynamics Working Group and future experimental testing plans.

R M Hall

Actuated forebody strakes

Actuated forebody strakes provide yaw control at high angles of attack. In one embodiment, the strakes are axially slidable in the forebody to be deployed out of slots provided for the strakes in the forebody. In another embodiment, the strakes are pivotally connected at the tip of the strakes to pivot radially outwardly out of the slots provided in the forebody. In another embodiment, the forebody is provided with either a single strake or two strakes and the forebody is rotatable to vary the radial location of the strake or strakes. All embodiments achieve significant yaw control capability over a wide angle of attack and sideslip ranges.

Daniel G Murri