Engineering Papers⌕ Search

Engineering topics

Dan'ko, S A

Publications and source records attributed to Dan'ko, S A.

Formation of hot spots in the plasma of a Z-pinch produced from low-density deuterated polyethylene

Results are presented from experimental studies of the plasma formation dynamics in a Z-pinch produced from a cylindrical microporous agar-agar load. The experiments were performed on the S-300 facility at a current of 2 MA and current rise time of 100 ns. To enhance the energy concentration, a deuterated polyethylene neck with a mass density of 50-75 {mu}g/cm{sup 3} and diameter of 1-2 mm was made in the central part of the load. The spatiotemporal characteristics of the Z-pinch were studied using an optical streak camera and fast frame photography in the optical and soft X-ray spectral ranges. X-ray emission was detected using semiconductor and vacuum diodes, and neutron emission was studied by means of the time-of-flight method. It is found that, in the course of continuous plasma production, hot spots with a diameter of 100 {mu}m form in the pinch plasma. The hot spots emit short soft X-ray pulses with a duration of 2-4 ns, as well as neutron pulses with an average neutron energy of about 2.45 MeV. The maximum neutron yield was found to be 4.5 x 10{sup 9} neutrons per shot. The scenario of hot spot formation is adequately described by two-dimensional MHD simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-pinch-based neutron source

Results are presented from experimental studies of the parameters of an X-pinch-based neutron source made of 70- to 80-{mu}m-diameter deuterated polyethylene fibers. At currents of up to 1.7 MA and a current rise time of {approx}150 ns, hot plasma spots were observed in the fiber crossing region. The formation of hot spots was accompanied by the generation of short soft X-ray pulses with a duration of 2-4 ns, as well as by neutron emission. The neutron energy was measured using the time-of-flight technique in four directions, at 0{sup o}, 90{sup o}, 180{sup o}, and 270{sup o} with respect to the load axis. The mean energy of the neutrons emitted along the axis towards the anode and cathode was found to be 2.0 {+-} 0.2 and 2.6 {+-} 0.1 MeV, respectively, and that of neutrons emitted in two opposite directions along the radius, 2.5 {+-} 0.1 and 2.4 {+-} 0.1 MeV. The maximum neutron yield at a current amplitude of 1.6 MA was of 10{sup 10} neutrons per shot.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A time-resolved spectroscopic diagnostic based on fast scintillator and optical fiber array for z-pinch plasmas

We report a specially designed type of temporal resolved x-ray spectroscopic diagnostic using a spherically bent quartz crystal for z-pinch plasmas. Registration of time-resolved spectra was accomplished by coupling fast plastic scintillator, an optical fiber array, an optical streak camera, and a charge coupled device as the recording medium of this diagnostic. The diagnostic has been tested in imploding wire array experiments on S-300 pulsed power facility. Time-resolved K-shell lines were successfully obtained for aluminum wire array implosion plasmas.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Studies of plasma dynamics in megampere X-pinches

Results are presented from experimental studies of the dynamics and parameters of the plasma generated by megampere (up to 2.3 MA) currents flowing through X-pinches formed from crossed wires made of various materials. The experiments were performed with different numbers of wires and different wire diameters. The X-ray yield in neon-like molybdenum lines (in the 2.5- to 3-keV photon energy range) from a <20 {mu}m hot spot was larger than 10 J, and the soft X-ray power emitted from this spot reached 120 GW. The hot-spot lifetime estimated by comparing the measured and calculated emission intensities and line profiles of helium-like Fe and Cr ions was {approx}10 ps. Hard X-ray emission in the photon energy range {>=}800 keV was also detected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗