Engineering Papers⌕ Search

Engineering topics

Dai, Sheng

Publications and source records attributed to Dai, Sheng.

At least 145 records · Page 8

Enhancing Cycling Stability and Capacity Retention of NMC811 Cathodes by Reengineering Interfaces via Electrochemical Fluorination

High-capacity cathodes (LiNi 0.8 Mn 0.1 Co 0.1 O 2 ) that can boost the energy density of lithium-ion batteries are promising candidates for vehicle electrification. However, several factors specific to high energy density materials entailing electrode reactions inhibit their application. Fluorination has shown a promising ability to combat the detrimental electrochemical performances of cathode materials, however, it remains difficult to achieve the desired functionality. In this work, a novel electrochemical fluorination (ECF) that demonstrates a promising electrochemical performance enhancement via stabilization of the cathode–electrolyte-interphase (CEI) by forming conformal LiF is proposed. Besides LiF surface layer formation, ECF reduces the degree of fluorination-induced Ni/Li disordering and enhances the layered structural stability as probed by X-ray diffraction. Because of the robust CEI, ECF-NMC811 cathodes deliver 203.0 mAh g -1 first discharge capacity at the current rate of C/10, with ≈98% capacity retention up to 100 cycles. Similarly, it delivers ≈180 mAh g -1 capacity at a 1 C rate with 86.4% capacity retention up to 200 cycles with average coulombic efficiency of > 99.5%. Comprehensive characterization with a multitude of probes reveals that ECF enhances the cycling stability of the electrode without altering bulk structure and morphology.

25 ENERGY STORAGE↗

Beyond Simple Dilution: Superior Conductivities from Cosolvation of Acetonitrile/LiTFSI Concentrated Solution with Acetone

Concentrated solutions of Li salts in acetonitrile are promising alternative electrolytes for the next generation of Li batteries as they may exhibit superior electrochemical properties. However, the reduced mobility of the chemical species is a barrier yet to be overcome, and for this, we explore the utilization of acetone as a cosolvent. Although acetone is a polar compound, we find that its addition to the LiTFSI/acetonitrile solution does not follow the trends expected for a simple dilution process. At a low concentration, acetone subtly shifts acetonitrile from the first to extended solvation sheaths of the ions. Still, most of the original structure of the solution is preserved, and mobile high-concentration clusters are formed in the solution. At higher concentrations, the cosolvation promotes cation–anion interactions but with a different nature from those in the original solution and still allows for a further increase in conductivity. Additionally, the non-coordinating fraction of acetonitrile acquires features resembling the pure solvent, which is a possible additional facilitating factor for ionic diffusion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intra-crystalline mesoporous zeolite encapsulation-derived thermally robust metal nanocatalyst in deep oxidation of light alkanes

Zeolite-confined metal nanoparticles (NPs) have attracted much attention owing to their superior sintering resistance and broad applications for thermal and environmental catalytic reactions. However, the pore size of the conventional zeolites is usually below 2 nm, and reactants are easily blocked to access the active sites. Herein, a facile in situ mesoporogen-free strategy is developed to design and synthesize palladium (Pd) NPs enveloped in a single-crystalline zeolite (silicalite-1, S-1) with intra-mesopores (termed Pd@IM-S-1). Pd@IM-S-1 exhibited remarkable light alkanes deep oxidation performances, and it should be attributed to the confinement and guarding effect of the zeolite shell and the improvement in mass-transfer efficiency and active metal sites accessibility. The Pd–PdO interfaces as a new active site can provide active oxygen species to the first C–H cleavage of light alkanes. This work exemplifies a promising strategy to design other high-performance intra-crystalline mesoporous zeolite-confined metal/metal oxide catalysts for high-temperature industrial thermal catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New-Generation Carbon-Capture Ionic Liquids Regulated by Metal-Ion Coordination

Development of efficient carbon capture-and-release technologies with minimal energy input is a long-term challenge in mitigating CO 2 emissions, especially via CO 2 chemisorption driven by engineered chemical bond construction. Herein, taking advantage of the structural diversity of ionic liquids (ILs) in tuning their physical and chemical properties, precise reaction energy regulation of CO 2 chemisorption was demonstrated deploying metal-ion-amino-based ionic liquids (MAILs) as absorbents. The coordination ability of different metal sites (Cu, Zn, Co, Ni, and Mg) to amines was harnessed to achieve fine-tuning on stability constants of the metal ion-amine complexes, acting as the corresponding cations in the construction of diverse ILs coupled with CO 2 -philic anions. The as-afforded MAILs exhibited efficient and controllable CO 2 release behavior with great reduction in energy input and minimal sacrifice on CO 2 uptake capacity. This coordination-regulated approach offers new prospects for the development of ILs-based systems and beyond towards energy-efficient carbon capture technologies.

36 MATERIALS SCIENCE↗

A high temperature cell for investigating interfacial structure on the molecular scale in molten salt/alloy systems

In this work, we describe the design and development of an in situ neutron reflectometry cell for high temperature investigations of structural changes occurring at the interface between inorganic salts, in their molten state up to 800 °C, and corrosion resistant alloys or other surfaces. In the cell, a molten salt is confined by an annular ring of single crystal sapphire constrained between the sample substrate and a sapphire plate using two gold O-rings, enclosing a liquid salt volume of 20 ml, along with a dynamic cell volume to accommodate expansion of the liquid with heating. Further, as a test case for the cell, we report on an in situ neutron reflectometry measurement of the interface between a eutectic salt mixture of MgCl 2 –KCl (32:68 molar ratio) and a single crystal sapphire substrate at 450 °C, resulting in the formation of a 60 Å layer having a scattering length density of 1.72 × 10 –6 Å –2 . While the origin of this layer is uncertain, it is likely to have resulted from the salt reacting with an existing impurity layer on the sapphire substrate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Rare earth amide compositions

A method for extracting a rare earth element from a rare earth-containing substance, the method comprising mixing the rare earth-containing substance with a protic ionic liquid, such as: wherein R1 is selected from hydrogen atom and hydrocarbon groups containing 1 to 6 carbon atoms; R2 and R3 are independently selected from hydrocarbon groups containing 1 to 12 carbon atoms; and X− is an anionic species; to produce a composition of the formula (RE)(amide)yXz at least partially dissolved in the protic ionic liquid, wherein RE is at least one rare earth element having an atomic number selected from 39, 57-71, and 90-103; y is 2-6; z is a number that charge balances the total positive charge of RE; and the amide is the conjugate base of the cationic portion of the protic ionic liquid of Formula (1) and has the following formula:

Freiderich, John William↗

Visualizing time-dependent microstructural and chemical evolution during molten salt corrosion of Ni-20Cr model alloy using correlative quasi in situ TEM and in situ synchrotron X-ray nano-tomography

In situ monitoring of corrosion processes is important to fundamentally understand the kinetics and evolution of materials in harsh environments. A quasi in situ transmission electron microscopy technique was utilized to study microstructural and chemical evolution of a Ni-20Cr disc sample 6 exposed to molten KCl-MgCl 2 salt for 60 s in consecutive 20 s iterations. In situ synchrotron X-ray nano-tomography was performed to characterize the morphological evolution of a Ni-20Cr microwire exposed to molten KCl-MgCl 2 . Here, both techniques captured key corrosion events and revealed mechanisms at different time and length scales, potentially bringing greater insights and 10 deeper understanding beyond conventional analysis.

36 MATERIALS SCIENCE↗

Operando Analysis of Gas Evolution in TiNb 2 O 7 (TNO)-Based Anodes for Advanced High-Energy Lithium-Ion Batteries under Fast Charging

TiNb 2 O 7 (TNO) is regarded as one of the promising next-generation anode materials for lithium-ion batteries (LIBs) due to its high rate capabilities, higher theoretical capacity, and higher lithiation voltage. Furthermore, this enables the cycling of TNO-based anodes under extreme fast charging (XFC) conditions with a minimal risk of lithium plating compared to that of graphite anodes. Here, the gas evolution in real time with TNO-based pouch cells is first reported via operando mass spectrometry. The main gases are identified to be CO 2 , C 2 H 4 , and O 2 . A solid–electrolyte interphase is detected on TNO, which continues evolving, forming, and dissolving with the lithiation and delithiation of TNO. The gas evolution can be significantly reduced when a protective coating is applied on the TNO particles, reducing the CO 2 and C 2 H 4 evolution by ~2 and 5 times, respectively, at 0.1C in a half-cell configuration. The reduction on gas generation in full cells is even more pronounced. The surface coating also enables 20% improvement in capacity under XFC conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphitic Aza-Fused π-Conjugated Networks: Construction, Engineering, and Task-Specific Applications

2D π-conjugated networks linked by aza-fused units represent a pivotal category of graphitic materials with stacked nanosheet architectures. Extensive efforts have been directed at their fabrication and application since the discovery of covalent triazine frameworks (CTFs). Besides the triazine cores, tricycloquinazoline and hexaazatriphenylene linkages are further introduced to tailor the structures and properties. Diverse related materials have been developed rapidly, and a thorough outlook is necessitated to unveil the structure–property–application relationships across multiple subcategories, which is pivotal to guide the design and fabrication toward enhanced task-specific performance. Herein, the structure types and development of related materials including CTFs, covalent quinazoline networks, and hexaazatriphenylene networks, are introduced. Advanced synthetic strategies coupled with characterization techniques provide powerful tools to engineer the properties and tune the associated behaviors in corresponding applications. Case studies in the areas of gas adsorption, membrane-based separation, thermo-/electro-/photocatalysis, and energy storage are then addressed, focusing on the correlation between structure/property engineering and optimization of the corresponding performance, particularly the preferred features and strategies in each specific field. In the last section, the underlying challenges and opportunities in construction and application of this emerging and promising material category are discussed.

36 MATERIALS SCIENCE↗

Flow and Arching of Biomass Particles in Wedge-Shaped Hoppers

Poor understanding of the flow behavior of granular biomass material poses great challenges for the bioenergy industry, as the equipment functioning time is significantly reduced by handling issues like screw feeder clogging and hopper arching. In this work, the flow behavior of loblolly pine chips, including the mass flow rate and the critical outlet width, in a wedge-shaped hopper is investigated by combining physical experiments and numerical simulations. Comprehensive characterization of the flow response affected by the two material attributes (initial packing, particle density) and the three operational parameters (hopper outlet width, hopper inclination, and surcharge) is conducted. The results show that the hopper outlet width linearly controls the mass flow rate while the hopper inclination angle controls the critical outlet size. The packing determines whether the flow is smooth or surging, and the surcharge-induced compaction creates flow impedance. The magnitude of these influences varies from a slender hopper with a low inclination angle to a flat-bottom silo. These findings provide guidance for hopper operation in the material handling industry and shed light on the construction of a novel design method for material handling equipment in biorefineries.

09 BIOMASS FUELS↗

Strategies toward the Synthesis of Advanced Functional Sorbent Performance for Uranium Uptake from Seawater

A polymer fiber-based adsorbent (AF1) composed of acrylonitrile and itaconic acid functional groups was synthesized by a radiation-induced graft polymerization technique onto hollow-gear shaped polyethylene (PE) fibers. Investigation of the optimum reaction parameters for the conversion of grafted cyano moieties into amidoxime groups was conducted by the reaction with hydroxylamine at different temperatures and periods in a variety of aqueous and organic solvents. The 13 C CP/MAS spectra of amidoximated AF1 adsorbent fibers from water–methanol and dimethyl sulfoxide (DMSO) revealed that both the cyclic imide dioxime and open-chain amidoxime were formed through the reaction. The conversion from amidoxime to imide dioxime was found to occur slowly and gradually with the increasing reaction time. The quicker diffusion of DMSO as compared to that of water–methanol, in the grafted trunk PE fiber, resulted in faster kinetics of the amidoximation reaction. The uranium adsorption capacity of the amidoximated AF1 samples was determined after (i) 24 h contact with sodium-based brine spiked with uranium and (ii) 56 days of exposure to filtered seawater (Sequim Bay, WA, USA) in flow-through columns. Finally, the uranium extraction performance of the adsorbents after exposure to filtered seawater was consistent with the laboratory screening results, and the amidoximated AF1 samples (in DMSO at 70 °C for 3 h) exhibited the highest 56 day uranium adsorption capacity (5.04 ± 0.15 g U/kg-ads) with faster adsorption kinetics compared to the pristine AF1 adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-regeneration of supported transition metals by a high entropy-driven principle

The sintering of Supported Transition Metal Catalysts (STMCs) is a core issue during high temperature catalysis. Perovskite oxides as host matrix for STMCs are proven to be sintering-resistance, leading to a family of self-regenerative materials. However, none other design principles for self-regenerative catalysts were put forward since 2002, which cannot satisfy diverse catalytic processes. Herein, inspired by the principle of high entropy-stabilized structure, a concept whether entropy driving force could promote the self-regeneration process is proposed. To verify it, a high entropy cubic Zr 0.5 (NiFeCuMnCo) 0.5 O x is constructed as a host model, and interestingly in situ reversible exsolution-dissolution of supported metallic species are observed in multi redox cycles. Notably, in situ exsolved transition metals from high entropy Zr 0.5 (NiFeCuMnCo) 0.5 O x support, whose entropic contribution (TΔS config = T$\star$12.7 J mol -1 K -1 ) is predominant in ΔG, affording ultrahigh thermal stability in long-term CO 2 hydrogenation (400 °C, >500 h). Current theory may inspire more STWCs with excellent sintering-resistance performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗