Engineering topics
Dabo, Ismaila
Publications and source records attributed to Dabo, Ismaila.
Quantifying multipoint ordering in alloys
A central problem in multicomponent lattice systems is to systematically quantify multipoint ordering. Ordering in such systems is often described in terms of pairs, even though this is not sufficient when three-point and higher-order interactions are included in the Hamiltonian. Current models and parameters for multipoint ordering are often only applicable for very specific cases or require approximating a subset of correlated occupational variables on a lattice as being uncorrelated. In this paper, cluster order parameters are introduced to systematically quantify arbitrary multipoint ordering motifs in substitutional systems through direct calculations of normalized cluster probabilities. These parameters can describe multipoint chemical ordering in crystal systems with multiple sublattices, multiple components, and systems with reduced symmetry. These are defined in this paper and applied to quantify four-point chemical ordering motifs in platinum/palladium alloy nanoparticles that are of practical interest to the synthesis of catalytic nanocages. Impacts of chemical ordering on nanocage stability are discussed. It is demonstrated that approximating four-point probabilities from superpositions of lower-order pair probabilities is not sufficient in cases where three- and four-body terms are included in the energy expression. Furthermore, conclusions about the formation mechanisms of nanocages may change significantly when using common pair approximations.
Single-Step Direct Laser Writing of Multimetal Oxygen Evolution Catalysts from Liquid Precursors
We investigate a laser direct-write method to synthesize and deposit metastable, mixed transition metal oxides and evaluate their performance as oxygen evolution reaction catalysts. This laser processing method enabled the rapid synthesis of diverse heterogeneous alloy and oxide catalysts directly from cost-effective solution precursors, including catalysts with a high density of nanocrystalline metal alloy inclusions within an amorphous oxide matrix. The nanoscale heterogenous structures of the synthesized catalysts were consistent with reactive force-field Monte Carlo calculations. By evaluating the impact of varying transition metal oxide composition ratios, we created a stable Fe 0.63 Co 0.19 Ni 0.18 O x /C catalyst with a Tafel slope of 38.23 mV dec -1 and overpotential of 247 mV, a performance similar to that of IrO 2 . Synthesized Fe 0.63 Co 0.19 Ni 0.18 O x /C and Fe 0.14 Co 0.46 Ni 0.40 O x /C catalysts were experimentally compared in terms of catalytic performance and structural characteristics to determine that higher iron content and a less crystalline structure in the secondary matrix decreases the charge transfer resistance and thus is beneficial for electrocatalytic activity. Furthermore, this conclusion is supported by density-functional theory calculations showing distorted active sites in ternary metal catalysts are key for lowering overpotentials for the oxygen evolution reaction.
Ferroelectricity in boron-substituted aluminum nitride thin films
This manuscript demonstrates ferroelectricity in B-substituted AlN thin films and a complementary set of first-principles calculations to understand their structure-property relationships. Al 1–x B x N films are grown by dual-cathode reactive magnetron sputtering on (110)W/(001)Al 2 O 3 substrates at 300°C at compositions spanning x = 0 to x = 0.20. X-ray diffraction studies indicate a decrease in both the c and a lattice parameters with increasing B concentration, resulting in a decrease in unit cell volume and a constant c/a axial ratio of 1.60 over this composition range. Films with 0.02 ≤ x ≤ 0.15 display ferroelectric switching with remanent polarizations exceeding 125 μCcm –2 while maintaining band gap energies of > 5.2eV. The large band gap allows low frequency hysteresis measurement (200 Hz) with modest leakage contributions. At B concentrations of x > 0.15, c-axis orientation deteriorates and ferroelectric behavior is degraded. Furthermore, density-functional theory calculations corroborate the structural observations and provide predictions for the wurtzite u parameter, polarization reversal magnitudes, and composition-dependent coercive fields.
Predicting the Pseudocapacitive Windows for MXene Electrodes with Voltage-Dependent Cluster Expansion Models
MXene transition-metal carbides and nitrides are of growing interest for energy storage applications. These compounds are especially promising for use as pseudocapacitive electrodes due to their ability to convert energy electrochemically at fast rates. Using voltage-dependent cluster expansion models, we predict the charge storage performance of MXene pseudocapacitors for a range of electrode compositions. M 3 C 2 O 2 electrodes based on group-VI transition metals have up to 80% larger areal energy densities than prototypical titanium-based (e.g., Ti 3 C 2 O 2 ) MXene electrodes. We attribute this high pseudocapacitance to the Faradaic voltage windows of group-VI MXene electrodes, which are predicted to be 1.2 to 1.8 times larger than those of titanium-based MXenes. The size of the pseudocapacitive voltage window increases with the range of oxidation states that are accessible to the MXene transition metals. Here, by similar mechanisms, the presence of multiple ions in the solvent (Li + and H + ) leads to sharp changes in the transition-metal oxidation states and can significantly increase the charge capacity of MXene pseudocapacitors.
First Principles Simulations of Electrified Interfaces in Electrochemistry
This chapter discusses some of the recent advances made in the first principles modeling of electrochemical catalysts. It also discusses the key development, namely the ability to explicitly treat the effects of surface electrification due to electrochemical processes and applied voltages in a computationally efficient manner. The chapter introduces the thermodynamics and statistical mechanics of electrified metal-solution interfaces. It then discusses the structure of the electrode-electrolyte interface and the effects of applied voltages, followed by an overview of the first-principles model and a motivating example. The chapter also provides a brief summary of classical thermodynamics and describes the basics of thermodynamic detour. It considers the thermodynamics of macroscopic systems and introduces several useful fundamental relations. Here, the chapter also considers a system to exist in a certain macrostate, which is a particular thermodynamic state specified by a set of fixed properties such as constant particle number, constant volume, and constant temperature.
First-principles study and experimental characterization of metal incorporation in germanium telluride
Germanium telluride is a well-known phase change material (PCM) used in non-volatile memory cells and radio frequency switches. Controlling the properties of GeTe for improved PCM device performance has sometimes been achieved by doping and/or alloying with metals, often at concentrations greater than 10 at. % and using non-equilibrium methods. Here, since switching PCMs between the low-resistance crystalline and high-resistance amorphous states requires a heating cycle, the stability of metal-incorporated GeTe (Ge 0.5–x M x Te 0.5 ) films is also critical to practical implementation of these materials in electronic and optoelectronic devices. In this work, we use both density-functional theory and experimental characterization methods to probe the solubility and critical properties of Ge 0.5–x M x Te 0.5 films. Using first-principles calculations, we determine the enthalpy of formation for GeTe with 2.08, 4.17, and 6.25 at. % of Cu, Fe, Mn, Mo, and Ti and show trends between the stability of the Ge 0.5–x M x Te 0.5 systems and the atomic position, composition, and distribution of the metal atoms in the GeTe matrix.
Photophysics and Electronic Structure of Lateral Graphene/MoS 2 and Metal/MoS 2 Junctions
Integration of semiconducting transition metal dichalcogenides (TMDs) into functional optoelectronic circuitries requires an understanding of the charge transfer across the interface between the TMD and the contacting material. In this work, we use spatially resolved photocurrent microscopy to demonstrate electronic uniformity at the epitaxial graphene/molybdenum disulfide (EG/MoS 2 ) interface. A 10× larger photocurrent is extracted at the EG/MoS 2 interface when compared to the metal (Ti/Au)/MoS 2 interface. This is supported by semi-local density functional theory (DFT), which predicts the Schottky barrier at the EG/MoS 2 interface to be ~2× lower than that at Ti/MoS 2 . We provide a direct visualization of a 2D material Schottky barrier through combination of angle-resolved photoemission spectroscopy with spatial resolution selected to be ~300 nm (nano-ARPES) and DFT calculations. A bending of ~500 meV over a length scale of ~2-3 μm in the valence band maximum of MoS 2 is observed via nano-ARPES. We explicate a correlation between experimental demonstration and theoretical predictions of barriers at graphene/TMD interfaces. Spatially resolved photocurrent mapping allows for directly visualizing the uniformity of built-in electric fields at heterostructure interfaces, providing a guide for microscopic engineering of charge transport across heterointerfaces. This simple probe-based technique also speaks directly to the 2D synthesis community to elucidate electronic uniformity at domain boundaries alongside morphological uniformity over large areas.