Engineering topics
Publications and source records attributed to Cutts, James A..
This document summarizes the technical challenges to planetary protection for these targets of interest and outlines some of the considerations, particularly at the system level, in designing an appropriate technology investment strategy for targets beyond Mars.
Detailed calculations have been performed to design the two balloon vehicle and quantify its performance during all phases of the mission. This paper includes key results from trade studies for balloon sizing and mass, crossover altitude, and payload temperature
A viewgraph describing technologies for entry probes is presented. The topics include: 1) Entry Phase; 2) Descent Phase; 3) Long duration atmospheric observations; 4) Survivability at high temperatures; and 5) Summary.
Until now, the exploration of Mars has taken place with global coverage of the planet by satellites in orbit or with landers providing very detailed coverage of extremely limited local areas. New developments in inflatable technology, however, now offer the possibility of in situ surface and atmospheric global studies of Mars using very lightweight rovers and balloons that can travel hundreds or even thousands of kilometers relatively quickly and safely. Both systems are currently being tested at JPL; preliminary results show great promise. One of the balloon technologies offers the additional bonus of being able to land payloads on Mars much more gently than parachutes, yet with considerably less mass.
The Mars Aerobot Micromission is almost a factor of 10 smaller than earlier concepts for a Mars balloon. A key goal is to achieve high payload mass fraction in a small total systems mass and to maximize the scientific potential of that payload. Scientific objectives include studies of the surface with a high resolution stereo imaging magnetometer and investigations of the structure and dynamics of the atmosphere with an in situ meteorology payload.
Robotic exploration of Venus presents many challenges because of the thick atmosphere and the high surface temperatures. The Venus Aerobot Multisonde mission concept addresses these challenges by using a robotic balloon or aerobot to deploy a number of short lifetime probes or sondes to acquire images of the surface. A Venus aerobot is not only a good platform for precision deployment of sondes but is very effective at recovering high rate data. This paper describes the Venus Aerobot Multisonde concept and discusses a proposal to NASA's Discovery program using the concept for a Venus Exploration of Volcanoes and Atmosphere (VEVA). The status of the balloon deployment and inflation, balloon envelope, communications, thermal control and sonde deployment technologies are also reviewed.
The Mars Aerobot Micromission is almost a factor of 10 smaller than earlier concepts for a Mars balloon. A key goal is to achieve high payload mass fraction in a small total systems mass and to maximize the scientific potential of that payload. Scientific objectives include studies of the surface with a high resolution stereo imaging magnetometer and investigations of the structure and dynamics of the atmosphere with an in situ meteorology payload.
A hyperspectral imager includes a focal plane having an array of spaced image recording pixels receiving light from a scene moving relative to the focal plane in a longitudinal direction, the recording pixels being transportable at a controllable rate in the focal plane in the longitudinal direction, an electronic shutter for adjusting an exposure time of the focal plane, whereby recording pixels in an active area of the focal plane are removed therefrom and stored upon expiration of the exposure time, an electronic spectral filter for selecting a spectral band of light received by the focal plane from the scene during each exposure time and an electronic controller connected to the focal plane, to the electronic shutter and to the electronic spectral filter for controlling (1) the controllable rate at which the recording is transported in the longitudinal direction, (2) the exposure time, and (3) the spectral band so as to record a selected portion of the scene through M spectral bands with a respective exposure time t(sub q) for each respective spectral band q.
The Space Exploration Initiative presents an opportunity to construct astronomical telescopes on the Moon using the infrastructure provided by the lunar outpost. Small automatically deployed telescopes can be carried on the survey missions, be deployed on the lunar surface and be operated remotely from the Earth. Possibilities for early, small optical telescopes are a zenith pointed transit telescope, a student telescope, and a 0.5 to 1 meter automatic, fully steerable telescope. After the lunar outpost is established the lunar interferometers will be constructed in an evolutionary fashion. There are three lunar interferometers which have been studied. The most ambitious is the optical interferometer with a 1 to 2 -km baseline and seven 1.5 aperture elements arranged in a 'Y' configuration with a central beam combiner. The Submillimeter interferometer would use seven, 5-m reflectors in a 'Y' or circular configuration with a 1-km baseline. The Very Low Frequency (VLF) array would operate below 30 mHz with as many as 100 elements and a 200-km baseline.
Report discusses some engineering problems arising in implementing system described in "Programmable Hyperspectral Imaging Mapper" (NPO-17794), a conceptual generic advanced spectral imaging system scanning in "pushbroom" fashion along ground track of airplane or orbiting spacecraft.
Programmable hyperspectral imaging mapper (PHIMAP) is conceptual generic advanced spectral imaging system that scans swath along ground track from airplane or spacecraft in orbit. Features include spectrally agile filters and processing on focal-plane array. Provides both high spatial resolution and large number of spectral channels. Can be programmed to trade spectral resolution andspectral coverage flexibly against signal-to-noise ratio to optimize utility of image data from scenes of spectrally and spatially varying brightness.
The Astrotech 21 technology program is being formulated to enable a program of advanced astrophysical observatories in the first decade of the 21st century. This paper describes the objectives of Astrotech 21 and the process that NASA is using to plan and implement it. It also describes the future astrophysical mission concepts that have been defined for the twenty-first century and discusses some of the requirements that they will impose on information systems for space astrophysics.
Proposed new class of two-dimensional spatial light modulators (SLM's) based on fabrication of multi-quantum-well (MQW) structures (e.g. of AlGaAs and InGaAs) on silicon substrates. Concept makes two-dimensional SLM arrays by taking advantage of mature technology of silicon charge-coupled devices (CCD's). Features include short response times, high resolution, and low switching energies.
The Astrotech 21 technology program is being formulated to enable a program of advanced astrophysical observatories in the first decade of the 21st century. This paper describes the objectives of Astrotech 21 and the process that NASA is using to plan and implement it.
A number of astrophysical observatory concepts were studied under the overall direction of the NASA Astrophysics Division in support of NASA's 90-day study of the Human Exploration Initiative. The four observatory concepts described here were investigated at JPL. In three of them, interferometric techniques would be used to acquire high resolution synthetic aperture images in several different parts of the electromagnetic spectrum: in the UV/visible near infrared; the submillimeter; and the very low frequency (1 to 30 MHz region). The fourth is a gravitational wave detector which uses laser optical interferometry to measure the strains induced by the passage of a gravitational wave. The observatory concepts reflect the constraints on lunar surface science deployment anticipated for the Human Exploration Initiative in the period 2002 through 2015.
Information on sensors research and technology is given in viewgraph form. Information is given on sensing techniques for space science, passive remote sensing techniques and applications, submillimeter coherent sensing, submillimeter mixers and local oscillator sources, non-coherent sensors, active remote sensing, solid state laser development, a low vibration cooler, separation of liquid helium and vapor phase in zero gravity, and future plans.
A development status evaluation is presented for solid-state self-scanned imaging arrays applicable to NASA space science missions, giving attention to the visible and IR spectral range (0.5-1000 microns). Shortward of 1.1 micron, Si CCDs will continue to be used. Beyond 10 microns, the challenge for NASA researchers lies in the development of a class of detectors that can dispense with the conventional cooling to below 10 K. Above 25 microns, extrinsic Ge detectors will be used, and beyond 200 microns, a novel extrinsic material such as GaAs will have to be developed for this application.